Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Genesis drawer side materials 10 x 5 describes Russian Birch plywood blanks sized for drawer side construction, so cabinet shops and serious woodworkers can build consistent drawers from a repeatable stock format. These Genesis drawer blank systems are available veneer plywood, which gives a wood-based platform suited to typical cabinet and furniture environments. All wood blanks are pre-finished with Endura ultra violet cured top coat, so the drawer sides arrive with a durable surface that avoids a separate clear-coating step on the inside faces. Because the top coat is UV cured, it is set at the factory, which supports steady throughput during drawer production without waiting for finish to dry. The product is identified as drawer side blanks and is part of a drawer construction system, so it slots directly into a workflow built around machining, assembly, and drawer box sizing.
The 10 x 5 drawer side materials format means each Genesis blank is sized 10 inches tall and 5 feet long, giving a predictable starting dimension for cutting drawer sides for various cabinet widths. The presence of the 1/4 inch drawer bottom dado means that groove cutting for the bottom panel is handled at the blank stage, so routing or sawing that feature on each finished piece is unnecessary. The 3/8 (10 mm) bottom reveal is built into the dado location, so the relationship between the bottom panel and the lower edge of the side is set by design rather than by layout on each drawer. Because the blanks carry a square edge profile, they present stable reference edges for table saw fences and machining fixtures, which supports accurate sizing of both shallow and deeper drawer sides.
The product is described as 10' x 60' drawer side, Baltic Birch and as Russian Birch plywood blanks, so it is aimed at drawer box construction where plywood sides are preferred. Being part of Genesis drawer blank systems, it fits into workflows that use standardized drawer heights such as 10 inches for taller storage drawers in kitchen, bath, or shop cabinetry. The 5 foot blank length allows multiple drawer sides or fronts to be cut from a single stick, which is useful when laying out parts for banks of drawers that share the same material and finish. Because the Russian Birch is noted for consistency in color and tightness of grain, these blanks support projects where the interior appearance of drawers should be uniform from cabinet to cabinet and from bay to bay.
The drawer side blanks are all wood blanks pre-finished with Endura ultra violet cured top coat, so each cut part retains the factory-applied surface right through typical machining sequences. That pre-finished surface lets shops move from cutting and joinery directly to assembly, since the finish step is handled before delivery of the blank. The built-in 1/4 inch drawer bottom dado sets the depth and width of the bottom groove, which helps keep drawer bottoms aligned and seated during gluing and clamping. With a 3/8 (10 mm) bottom reveal, the position of the groove relative to the bottom edge of the side is fixed, helping drawers line up visually when installed in a run of cabinetry. Russian Birch plywood blanks made from 1st quality Russian Birch veneers bonded to ANSI/BIFMA spec 7 layer plywood cores offer a defined core construction, which supports accurate machining for dovetails, slots, or other joinery cuts into stable layers. The square edge profile of the blanks provides two straight reference sides, which can be set against fences and stops to keep repeat cuts and dado relationships consistent from one part to the next.
Genesis drawer side materials 10 x 5 are Russian Birch plywood blanks made from 1st quality Russian Birch veneers bonded to ANSI/BIFMA spec 7 layer plywood cores, giving a structured plywood build for drawer sides.
The drawer blanks are pre-finished with Endura ultra violet cured top coat, so the surface is factory-finished and ready for cutting and assembly without adding a separate clear finish step.
The drawer blanks have 1/4 inch drawer bottom dado, creating a standard groove sized for typical 1/4 inch bottoms so the panel seats correctly during drawer box assembly.
All drawer blanks have a 3/8 (10 mm) bottom reveal, which fixes the bottom panel position to give a consistent exposed edge look along the lower drawer sides.
Blank lengths are 5', so each Genesis Russian Birch drawer side blank provides five feet of material for cutting multiple drawer sides and fronts from the same length.
The blanks have a square edge profile, giving straight, clean reference edges that support accurate cutting, joinery layout, and alignment of drawer components.
The Genesis drawer side materials 10 x 5 format, combined with Russian Birch plywood construction and Endura ultra violet cured top coat, offers a defined platform for building drawer boxes from standardized blanks. With 1/4 inch drawer bottom dado, a 3/8 (10 mm) bottom reveal, and a square edge profile, each stick is prepared for accurate cutting, machining, and assembly. For shops and serious DIY users working with Baltic Birch style drawer interiors, this BS254RB Genesis drawer side blank gives a clearly specified material ready to slot into drawer construction runs.
Sold In: 1 Each
