Schaub Traditional Series knob from Schaub and Company is a solid brass cabinet knob in an oil rubbed bronze finish, so it pairs decorative appeal with a substantial feel that suits traditional millwork and casework projects. The 1-1/4 inch (32 mm) diameter head gives a comfortable finger purchase, which helps when opening heavier cabinet doors or wide drawers. A 3/4 inch base diameter steps the knob down cleanly to the door or drawer face, supporting a neat visual transition on finished panels. The 1 inch projection sets the hand grip out from the surface, leaving room for fingers without pulling the knob too far into the work area. The Traditional Series design ties these dimensions together to support a consistent look across a run of cabinets, panels, or furniture pieces.
The 1-1/4 inch diameter on this Schaub and Company knob defines the drilling layout, so installers can standardize centerline spacing for multiple fronts using that head size as the visual reference. With a 3/4 inch base diameter, the contact area at the panel is controlled, helping the knob seat evenly when tightened against finished cabinet surfaces. The 1 inch projection influences where the hand lands in relation to door edges, letting layout lines stay consistent from piece to piece. The 8-32 screw size ties directly to common cabinet hardware drilling patterns, supporting straightforward installation into pre-bored holes on doors or drawer fronts.
This 1-1/4 inch diameter cabinet knob from the Traditional Series fits applications where a single-point pull is needed on doors or drawers that match a classic design theme. The solid brass material suits decorative hardware installations in cabinets, vanities, and built-ins that benefit from a metal knob with a noticeable feel when operated. An oil rubbed bronze finish visually aligns with traditional and rustic design schemes, supporting continuity where hinges and other visible hardware follow the same finish family. The 3/4 inch base diameter allows the knob to sit comfortably on face frames and slab fronts without crowding panel edges, so it can be centered on narrow rails as well as wider drawer fronts. With a 1 inch projection, this knob supports use on standard-depth cabinet doors and drawer fronts, keeping the hand clear of adjacent faces while staying close enough to the panel to avoid snagging on passing traffic in tight spaces.
The Schaub 706-10B knob uses a 1-1/4 inch (32 mm) diameter head, which simplifies repeated layout in a shop because that size is a common reference for drilling templates and jigs used on cabinet fronts. Its 3/4 inch base diameter creates a stable bearing surface against the door or drawer, helping maintain alignment under repeated pulling forces during daily use. A 1 inch projection sets the knob at a predictable stand-off, supporting consistent clearance for fingers across all fronts in a run. The solid brass construction gives the knob weight, which can help doors and drawers feel more controlled when opened and closed. The oil rubbed bronze finish provides a dark visual anchor on lighter paints and stains, helping installers use the knob as a design element to tie together other bronze-finished components in the same room. The 8-32 screw size matches a widely used machine thread, so cabinet drilling operations can stay standardized around that thread specification.
The Schaub 706-10B knob has a 1-1/4 inch diameter head, a 3/4 inch base diameter, and a 1 inch projection, giving a balanced grip and a compact footprint on cabinet fronts.
This oil rubbed bronze cabinet knob is made from solid brass, providing a dense feel in the hand and supporting repeated door and drawer use in cabinetry.
The 1 inch projection places the knob slightly off the door or drawer face, giving finger clearance for a comfortable pull while keeping the knob close to surrounding cabinetry.
The 1-1/4 inch diameter creates a larger contact area, helping with grip and giving installers a clear visual target for consistent knob placement on multiple doors.
The 8-32 screw size matches a common cabinet hardware thread, allowing the knob to align with typical drilling patterns on doors and drawer fronts.
The Traditional Series knob, finished in oil rubbed bronze, supports classic and traditional cabinet designs by matching other bronze-finished decorative hardware.
The Schaub Traditional Series knob pairs solid brass construction with an oil rubbed bronze finish, so it supports traditional cabinet, vanity, and built-in projects needing a 1-1/4 inch diameter pull point. Its 3/4 inch base diameter, 1 inch projection, and 8-32 screw size align with common cabinet drilling and layout choices. For projects calling for a dark, traditional knob with these specific dimensions, this Schaub 706-10B model from Wurth Baer Supply fits directly into that requirement.