Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Valencia knob brushed nickel from the Berenson Valencia Series provides a 1-3/16 inch length knob that gives a comfortable pull point on cabinet doors or drawers, so users get a solid grip in everyday use. The knob is 3/4 inch wide, which keeps the profile compact while still offering enough surface for fingers, helping reduce slips when hands are busy in the shop or kitchen. A projection of 1-3/16 inch spaces fingers away from the cabinet face, which helps protect finished surfaces from fingerprints and contact wear. The 9/16 inch base diameter seats the knob neatly against the door or drawer front, supporting clean lines on face frames or panels. Constructed from zinc die cast material, the knob offers a sturdy metal body that supports repeated operation over time. The brushed nickel finish delivers a muted metallic look that fits well with many hinge and slide finishes, helping keep hardware appearance consistent across the job.
The Valencia Series knob uses an M4 x 45mm screw size, which defines the machine thread used to fasten the knob through the door or drawer front. This screw specification matters when working with varying material thicknesses, because it sets expectations for pilot hole sizing and threading behavior. The 1-3/16 inch projection and 1-3/16 inch length work together to keep the knob easy to grasp without extending excessively into walkways, which is helpful on busy cabinet runs. The 3/4 inch width and 9/16 inch base diameter give installers predictable bearing surfaces on the front and at the contact point, which supports repeatable results when laying out multiple knobs in straight lines or grid patterns.
This Berenson Valencia Series brushed nickel knob is part of the Decorative Hardware and Moldings category under knobs, so it is suited to cabinet and furniture door and drawer fronts where appearance and hand feel both matter. The zinc die cast material gives the knob a solid metal structure, which is useful on frequently used access points around kitchens, work areas, or storage cabinetry. Its 1-3/16 inch length or diameter keeps the knob appropriately scaled for standard cabinet fronts, helping it look balanced on both base and wall cabinets. At 3/4 inch width, the knob avoids overpowering narrow drawer fronts, which is important when spacing multiple knobs across a bank of drawers.
The 1-3/16 inch projection works well anywhere users need enough finger room to pull without catching knuckles on surrounding trim, which is valuable on face-frame cabinets with inset doors or deeper profiles. With a 9/16 inch base diameter, the knob concentrates its contact area in a defined circle, which helps align the knob visually with stile and rail intersections. The brushed nickel finish coordinates easily with many common hinge and slide finishes labeled brushed nickel, supporting a consistent look from front hardware to internal components. Because this knob is identified by manufacturer part number 7021-1BPN-P and SAP description VALENCIA KNOB 1-3/16'L BRSH NKL, it fits into project documentation where exact part tracking is required for repeat orders.
The specified M4 x 45mm screw size tells installers the thread standard used with this knob, which simplifies choosing matching machine screws for cabinet fronts that differ in thickness from one run to another. Using a known M4 thread allows consistent drilling and tapping approaches across all doors and drawers on the job. The 1-3/16 inch length or diameter provides a clear reference dimension when laying out knob positions relative to door edges, which helps keep centerlines uniform and reduces rework from misaligned drilling. The 3/4 inch width gives a stable gripping surface while still leaving visual breathing room on tight rail sections, which is important when repeating the layout on large banks of cabinetry.
The 1-3/16 inch projection helps define how far to set back the knob from corners or adjacent walls, since the extension dictates clearance when doors swing or drawers extend. The 9/16 inch base diameter offers a predictable footprint against the finished surface, supporting even pressure around the mounting hole and a flush seat against paint, laminate, or veneer. Zinc die cast construction with a brushed nickel finish provides a uniform exterior that works well when knobs are installed in long visual runs, helping each piece read consistently under different lighting angles. The clear classification under Decorative Hardware and Moldings | Knobs and the Berenson brand name helps specifiers align this part with other Berenson hardware in the same project.
The Valencia knob has a 1-3/16 inch length or diameter, 3/4 inch width, 1-3/16 inch projection, and 9/16 inch base diameter, which together define its scale and hand clearance on cabinet fronts.
The Berenson Valencia knob is made from zinc die cast material, giving it a solid metal body suited to repeated opening and closing of cabinet doors and drawers.
The 7021-1BPN-P Valencia knob has a brushed nickel finish, providing a muted metallic appearance that coordinates with other brushed nickel cabinet hardware.
The 1-3/16 inch projection spaces the knob away from the cabinet face, improving finger clearance and helping limit contact with the finished surface during pulls.
This Valencia cabinet knob uses an M4 x 45mm screw size, providing a defined machine thread standard for fastening through cabinet doors or drawers.
This knob is identified as Berenson Corporation part number 7021-1BPN-P, with SAP description VALENCIA KNOB 1-3/16'L BRSH NKL, supporting precise repeat selection.
The Berenson Valencia Series brushed nickel 1-3/16 inch knob combines defined dimensions, zinc die cast construction, and a specified M4 x 45mm screw size, giving installers a repeatable hardware choice for coordinated cabinet runs and documented projects at Wurth Baer Supply.
Sold In: 1 Each
