Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
African Limba edgebanding from Doellken Woodtape is a PVC edge banding designed to cover and protect raw sheet-good edges while presenting an African Limba appearance along the run. The .018 inch thickness creates a low-profile edge that blends closely with typical laminated panels, which helps panels read as a single finished surface instead of exposing the core. The 15/16 inch width gives coverage slightly beyond a 3/4 inch panel face, allowing trimming back to a tight, flush edge. As an edge banding, this product finishes exposed sides of cabinets, shelving, and casework panels so cut edges are not visible in the completed installation. The African Limba color and pattern support visual continuity when working with surfaces that are specified or matched to this tone. Manufactured by Doellken Woodtape, the banding provides a consistent profile that supports repeatable edging across multiple parts in a job.
This Doellken Woodtape African Limba edge banding is .018 inch thick, so it lays close to the face of laminated panels and keeps the edge detail modest once trimmed. The relatively thin profile reduces the amount of material at the corner, which supports a controlled, square edge on doors or shelves. With a 15/16 inch width, the banding extends past both faces of a typical 3/4 inch panel, leaving margin for trimming on each side. That width range is useful when edging casework parts where uniform reveal along both faces is important. As a PVC edge banding, it is intended to be applied along the edge of panels, turning a cut substrate edge into a continuous African Limba edge appearance that visually ties into matching surfaces.
This African Limba .018 inch thick by 15/16 inch wide PVC edge banding from Doellken Woodtape is suited for applications where an African Limba detail is specified on exposed panel edges. In cabinet runs or furniture components built from sheet goods, the banding is applied along cut edges so the finished piece shows an African Limba tone on all visible sides. The 15/16 inch width helps when edging carcass sides, tops, bottoms, and shelving panels cut from material near 3/4 inch thickness, because it spans the edge and allows trimming flush. The product sits within the Edgebanding & Surfacing category under Edgebanding, PVC, which positions it for typical casework, displays, or built-ins where PVC edging is appropriate for the environment. The defined African Limba identity lets shops standardize on this color when matching corresponding African Limba surfaces in a project.
The .018 inch thickness of this Doellken Woodtape African Limba edgebanding gives installers a manageable edge profile that balances coverage and subtle appearance along cabinet and furniture components. Because the banding is relatively thin, trimming equipment can bring the edge down close to the panel face, which assists in producing straight, even lines across long runs of doors or shelves. The 15/16 inch width provides working tolerance along the edge of material typically sized around 3/4 inch, so the banding can be positioned without being exactly flush during application and then brought to final dimension with trimming tools. Using the same manufacturer part number, 3956-1518-1, across repeat orders keeps the color, thickness, and width consistent from job to job, supporting uniform outcomes on replacements or additional sections installed later in a project. As an African Limba PVC edge banding, it fills the role of turning exposed edges into a continuous, matched African Limba detail.
The product is .018 inch thick by 15/16 inch wide, which provides a thin edge profile with enough width to span typical 3/4 inch panel edges and allow trimming for a flush finish.
The banding is categorized as PVC edge banding, so it is a PVC material used to cover panel edges while presenting an African Limba appearance along the finished edge.
This .018 inch thick by 15/16 inch wide African Limba edge banding is manufactured by Doellken Woodtape, which identifies the specific source and supports consistent reordering.
The 15/16 inch width extends beyond both faces of many 3/4 inch panels, giving installers room to trim back to a clean, centered African Limba edge on doors or casework.
The .018 inch thickness keeps the PVC banding relatively thin, which supports a modest edge detail that can be trimmed close to the panel face for a smooth, low-step transition.
The manufacturer part number 3956-1518-1 identifies this specific Doellken Woodtape African Limba PVC edge banding with .018 inch thickness and 15/16 inch width for accurate selection.
This Doellken Woodtape African Limba PVC edge banding delivers a .018 inch thick by 15/16 inch wide profile aimed at finishing exposed panel edges in an African Limba tone. The combination of thin construction and slightly over-width sizing supports precise trimming and consistent edge lines along cabinets, shelving, and similar casework. For projects built around African Limba surfaces that call for coordinated edges, this edge banding offers a defined, repeatable specification using part number 3956-1518-1.
Sold In: 600 Lineal Ft