PVC edgebanding mahogany 15/16 x 600 gives you a Doellken Woodtape edge banding solution sized at 15/16 inch wide, so it covers standard panel edges with a bit of tolerance for clean trimming on cabinets and fixtures. The 0.018 inch thickness keeps the edge profile slim, which helps when matching modern panel looks and keeping corners from feeling bulky in hand. The continuous 600 foot roll format supports longer runs of parts before changing rolls, which helps maintain color consistency across a project. The mahogany color is identified as color 3962, which ties directly to the listed laminate references for coordinated projects. The product is classified as PVC edge banding, so it is suited for typical woodworking and casework edge finishing where a PVC edge is specified. The manufacturer part number 3962-1518-1 lets you repeat the same material on future jobs without re-matching.
This mahogany PVC edge banding in 15/16 inch width gives installers the overhang needed for edge banding machinery and hand trimmers, which supports tight glue lines and clean final passes along panel edges. The 0.018 inch thickness works well where a low-profile edge is wanted, so the transition after trimming and scraping stays subtle against the laminate or TFL surface. The continuous 600 foot roll helps feed edgebanders for extended cycles, which reduces changeovers and keeps the same color 3962 mahogany running through the machine. Because the width, thickness, roll length, and color are clearly defined, it becomes straightforward to align tooling setup and job planning to this specific tape.
This PVC edgebanding in mahogany color 3962 is referenced as a good color match for American Laminates June Mahogany, which supports coordinated edges on panels finished in that laminate. It is also noted as a close color match for American Laminates Mahogany D005, allowing it to be used on projects using that pattern where a close tone is acceptable in the overall design. The banding is described as a good match to Arclin D004 Sapelli Mahogany, helping keep vertical and horizontal surfaces visually tied together when that decor is used. It is further listed as a good color relation to Decore-Ative Cashew Mahogany, which allows consistent mahogany appearance across casework using that finish. For high-pressure laminate work, it is described as a good match to Formica 7008 Acajou Mahogany in the 43 Artisan finish, giving laminate shops an edge option tied to that specific code. The banding is also called a good match for Lamitech 0380 Sapelly, which supports TFL and laminate combinations using that tone. Additional references connect it as a good match to Roseburg Duramine 318 June Mahagony in the Suede finish, and as a close match to Roucke Mahogany and Thermo Pressed TFL-026 June Mahogany, providing several decor lines where the edge color aligns visually.
The detailed color match notes tying mahogany color 3962 to American Laminates, Arclin, Decore-Ative, Formica, Lamitech, Roseburg Duramine, Roucke, and Thermo Pressed TFL decors give shops specific codes to work from, which streamlines material call-outs on drawings. When edge banding is identified as a good or close match to these surfaces, designers and estimators can align the mahogany PVC edge with the chosen face material without separate visual trials. The consistent 15/16 inch width and 0.018 inch thickness apply across all of these matches, so once machinery is set for this tape, the same setup can run jobs using the different listed decor codes. The 600 foot roll length supports running multiple cabinet sections or multiple rooms worth of panels with those laminate and TFL finishes under the same color 3962, which helps projects maintain a uniform mahogany tone from edge to face. The manufacturer part number 3962-1518-1 directly reflects this combination of color, width, thickness, and roll length, so purchasing and production can reference one code when planning work involving these listed decors.
This PVC edgebanding is 15/16 inch wide and 0.018 inch thick, which supports standard panel edging where a slim, trimmable overhang and a low-profile finished edge are desired in cabinet or fixture work.
The Doellken Woodtape 3962-1518-1 roll is 600 feet long, giving enough length to run multiple cabinet sections or larger casework jobs while keeping the same mahogany color 3962 throughout.
The mahogany 3962 color is described as a good or close match to several decors, including American Laminates June Mahogany, Arclin D004 Sapelli Mahogany, Formica 7008 Acajou Mahogany 43 Artisan, and Roseburg Duramine 318 June Mahagony S Suede.
This mahogany PVC edge banding is referenced as a good or close match to Thermo Pressed TFL-026 June Mahogany and Roseburg Duramine 318 June Mahagony S Suede, supporting use alongside those TFL finishes.
The 0.018 inch thickness keeps the edge banding relatively thin, so after trimming and scraping the transition between face material and edge stays subtle for flatter door and panel edges.
The 15/16 inch width gives extra coverage over typical 3/4 inch cores, which supports accurate trimming on edgebanders and hand tools while guarding against slight panel size variations showing at the edge.
This Doellken Woodtape PVC edgebanding in mahogany color 3962, sized 15/16 inch by 0.018 inch in a 600 foot roll, ties directly to specific laminate and TFL decor codes for coordinated casework. The clearly defined dimensions and color references let shops specify manufacturer part number 3962-1518-1 with confidence when matching American Laminates, Formica, Lamitech, Roseburg Duramine, and related mahogany tones on upcoming cabinet and fixture runs.