
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Drawer Front Adjuster with Screw Black is a Grass front adjuster for drawers in black plastic, so it gives drawer projects a consistent, low-visibility adjustment point that blends with dark hardware layouts. The part is identified as Manufacturer Part # 13119-12, which helps match it across jobs or when repeating a spec on future projects. The adjuster allows for independent adjustment for the drawer front, so the front can be set without shifting the drawer box and that saves time on fine-tuning reveals. This Grass America component fits into a 1 inch (25mm) hole, so hole drilling can follow a simple, repeatable pattern on the shop floor. The hole depth is 1/2 inch (13mm), so boring depth is shallow enough for standard drawer materials while still giving the adjuster a positive seat during assembly.
This black plastic drawer front adjuster fits into a 1 inch (25mm) hole, so installers can rely on a clearly defined boring diameter when preparing the drawer box. Because the required depth is 1/2 inch (13mm), the boring operation removes only a modest amount of material, which supports stable seating of the adjuster in typical drawer side thicknesses. The adjuster allows for independent adjustment for drawer front, so once the hole is drilled to 1 inch by 1/2 inch, the hardware can be positioned and then used to fine-tune the front location relative to the cabinet face. The product is identified as a Grass front adjuster for drawers, so it aligns with hardware layouts that already use Grass components in the same project.
This Grass front adjuster for drawers is a black plastic part designed to fit into a 1 inch (25mm) hole with a depth of 1/2 inch (13mm), so it works well wherever drawer box material can accept that bore without compromising the side wall. Because the adjuster allows for independent adjustment for drawer front, it suits projects where consistent, narrow reveals between fronts are required across a run of cabinets. The black plastic construction keeps the adjuster visually subdued when used with dark interiors or dark drawer components, which helps keep the focus on the drawer fronts themselves. As a Grass America component identified by Manufacturer Part # 13119-12, it fits naturally into hardware schedules that already call out specific Grass drawer items, supporting repeatable use across multiple jobs or phases.
The drawer front adjuster with screw in black plastic allows for independent adjustment for drawer front, so installers can shift the front without disturbing slide settings, which reduces the likelihood of going back to re-level the drawer box. By fitting into a 1 inch (25mm) hole to a depth of 1/2 inch (13mm), the adjuster relies on a simple, clearly defined bore that can be duplicated on jigs, drill presses, or line-boring equipment, which supports uniform placement from drawer to drawer. The use of black plastic means contact between the adjuster and drawer front happens against a plastic surface, which helps protect the finished front as it is brought into alignment. With the part described as Grass front adjuster for drawers and referenced as Manufacturer Part # 13119-12, shops can document this specific adjuster in project notes and reuse the same setup and drilling pattern whenever that part number is specified again.
The Grass front adjuster for drawers in black plastic allows for independent adjustment for drawer front, so the front position can be tuned without shifting the drawer box or slide setup.
The drawer front adjuster fits into a 1 inch (25mm) hole, so drilling operations can follow a fixed diameter when preparing drawer boxes for this component.
The drawer front adjuster uses a 1/2 inch (13mm) hole depth, so the bore stays shallow in typical drawer materials while still seating the adjuster securely.
The adjuster is black plastic, so it remains low-visibility inside the drawer area and provides a non-metal contact point against the drawer front surface.
Independent adjustment for drawer front lets the installer move only the front to set gaps and alignment, which streamlines fine-tuning after slides and boxes are already positioned.
This Grass America drawer front adjuster is identified by Manufacturer Part # 13119-12, so it can be referenced directly in hardware lists and project documentation.
The Drawer Front Adjuster with Screw Black from Grass America is a black plastic front adjuster that allows for independent adjustment for drawer front, so it is suited to jobs where precise reveals are part of the spec. Its 1 inch (25mm) hole fit and 1/2 inch (13mm) depth give clear drilling targets for shop or field work, reducing layout guesswork between drawers. With its distinct Manufacturer Part # 13119-12, this drawer front adjuster can be specified by part number when ordering from Wurth Baer Supply to maintain consistency across repeat projects.
Sold In: 1 Each