Doellken PVC Edgebanding 15/16" x 0.018", 4145 Knotty Pine, 600', 4145 1518 1

PVC Edgebanding 4145 Knotty Pine For Panel Edges

PVC edgebanding 4145 Knotty Pine from Doellken Woodtape covers and finishes exposed panel edges with a knotty pine color match. The 0.018 inch thick PVC profile adds a defined edge while following typical cabinet and casework thicknesses. The 15/16 inch width works with common board and door constructions where a slightly over-wide strip is trimmed back after application. The 600 foot roll length supports longer production runs or multiple projects from a single coil, which reduces changeovers during edgebanding work. Color 4145 Knotty Pine provides a knotty pine appearance along the edge that coordinates with matching faces or complementary finishes. The edge banding format supports straight-edge applications on cabinetry, shelving, and furniture panels in typical woodworking environments.

Key PVC Edgebanding Details For Daily Work

• The 0.018 inch thick PVC construction creates a slim edge profile that sits close to the panel face, which suits applications where a light, unobtrusive edge is preferred on cabinets and furniture panels.
• The 15/16 inch width provides slight overhang beyond standard panel thicknesses, giving room for trimming tools to flush the edge cleanly and reduce visible glue lines after processing.
• The 600 foot roll length supports extended runs on edgebanders, helping maintain consistent color and edge appearance across many parts in a job or series of jobs.
• Color 4145 Knotty Pine supplies a knotty pine tone along the edge, helping visually tie panel edges to knotty pine faces or similar woodgrain laminates in a project.
• The Doellken Woodtape brand identifies the edgebanding as part of a dedicated PVC edge banding line, aligning with trade use in cabinet shops and woodworking operations.

Edgebanding Size And Thickness For Clean Fit

The 0.018 inch thickness of this Doellken Woodtape PVC edgebanding provides a modest build on the panel edge, which helps keep transition lines tight and less pronounced on finished pieces. With a 15/16 inch width, the banding extends past typical 3/4 inch panels before trimming, giving edge machinery or hand tools space to work without starving the edge. This width also supports applications where slightly thicker substrates are used but still benefit from a trimmable margin. The continuous 600 foot roll format fits typical edgebander coil handling, enabling uninterrupted runs of knotty pine-colored edging across casework, shelving, or door components.

Using Knotty Pine PVC Edgebanding In Shop Production

Where This Knotty Pine Edge Banding Fits Best

This PVC edge banding from Doellken Woodtape is set up for cabinetry, furniture, and general woodworking where exposed board edges need a knotty pine appearance. The 15/16 inch width works along cabinet sides, shelves, and door edges where a narrow strip is applied and then trimmed back. On runs of closet interiors or built-in units, the 600 foot roll length supports many repeated parts using the same color 4145 Knotty Pine, which keeps edges visually consistent from piece to piece. The 0.018 inch thickness suits applications where a lean edge is desired, helping maintain a similar feel between the panel surface and the banded edge.

Why These Dimensions Support Consistent Results

The 15/16 inch by 0.018 inch sizing of this PVC edgebanding provides clearance for trimming while limiting excess material at the edge, which supports repeatable results on edgebanders and trimmers. The thickness allows the edge to seat closely against the panel face, helping reduce the chance of a noticeable step between surfaces during finishing operations. Color 4145 Knotty Pine keeps the edge visually aligned with knotty pine-themed projects, supporting layout planning where components are cut and edged from the same design scheme. The 600 foot roll length reduces mid-job color changes on larger orders, which matters when matching multiple doors, drawer fronts, or carcass parts in one installation.

Common Questions About Doellken Knotty Pine Edgebanding

Select PVC Edgebanding 4145 Knotty Pine For Projects

This PVC edgebanding 4145 Knotty Pine from Doellken Woodtape combines a 0.018 inch thickness, 15/16 inch width, and 600 foot roll length to support cabinet and furniture edge finishing. Selecting this color 4145 Knotty Pine profile aligns panel edges with knotty pine design work, helping projects maintain consistent appearance across doors, shelves, and carcass parts in the shop.