PVC Edgebanding, Color 4488 Arbor Myrtle, 0.018" Thick 15/16" x 600' Roll

PVC Edgebanding 4488 Arbor Myrtle For Clean Edges

PVC edgebanding 4488 Arbor Myrtle is Doellken Woodtape edge banding designed to finish exposed edges on compatible panels in the Arbor Myrtle decor. The color is identified as 4488 Arbor Myrtle, which aligns to Roucke, Cinnamon Myrtle as a good color match, so edges present a coordinated tone across the project. The edgebanding is classified as PVC Edgebanding & Surfacing, which supports its role in covering raw panel edges in matching surfacing work. The material is PVC, so installers work with a stable, machinable edge solution for cabinet and furniture components that are specified in the Arbor Myrtle color family. The product type is Edge Banding from Doellken Woodtape, giving shops a defined, repeatable source when they need consistent Arbor Myrtle edges on multiple jobs.

Key Arbor Myrtle Edge Banding Details For Projects

• The edgebanding thickness is 0.018 inch, which creates a low-profile edge that blends closely with panel faces and helps maintain a flush, finished look after trimming and finishing passes.
• The width is 15/16 inch, giving coverage that spans typical panel thickness with a bit of overhang, which supports straightforward trimming while still fully concealing the core edge.
• Each roll length is 600 feet, allowing longer production runs and multiple cabinets or components to be edged from a single roll without frequent changeovers during shop work.
• The color reference 4488 Arbor Myrtle is noted as a good match to Roucke, Cinnamon Myrtle, which simplifies material selection when coordinating edges with those specific decor names across a project.
• The product is identified as Edge Banding within Edgebanding & Surfacing, so it fits into standard edgebanding workflows where raw panel edges must align visually with Arbor Myrtle surfaces.

Installation Dimensions That Drive Edge Fit

The 0.018 inch thickness defines how PVC edgebanding 4488 Arbor Myrtle sits on the edge, so trimming equipment can be dialed in for a light, precise cut without removing excessive material. The 15/16 inch width gives workable overhang on standard panel edges, helping installers feed parts confidently through edgebanders and achieve full coverage from face to face. The 600 foot roll format supports extended installation sessions on Arbor Myrtle jobs, reducing interruptions when edging a series of cabinet parts or larger runs in the same color.

Using Arbor Myrtle PVC Edgebanding In Real Jobs

Where PVC Edgebanding 4488 Arbor Myrtle Fits Best

PVC edgebanding 4488 Arbor Myrtle is suited to projects using Arbor Myrtle surfacing where edge color continuity matters. The color description identifies it as Arbor Myrtle with a noted relation to Roucke, Cinnamon Myrtle, so it serves jobs built around those decor selections. As part of the Edgebanding & Surfacing category, it fits into cabinet, furniture, or fixture work that relies on matching surfaces and edges for a unified appearance. The Doellken Woodtape branding ties it to a recognized edge banding line, so shops standardizing on Arbor Myrtle decor can repeatedly pull the same part number for consistent visual results. With a 600 foot roll length, this product aligns well with production environments where multiple components share the same Arbor Myrtle edge requirement, supporting continuous runs in that specific color.

Why These Arbor Myrtle Details Support Consistent Results

The 0.018 inch thickness on this PVC edge banding gives a defined profile that responds predictably to trimming and scraping, helping installers produce clean transitions between Arbor Myrtle faces and edges. The 15/16 inch width provides enough material to cover the core and slight panel tolerances, which supports consistent reveal control along doors, drawer fronts, and casework edges. The Arbor Myrtle color code 4488, along with the reference to Roucke, Cinnamon Myrtle as a good match, allows planners to specify this banding when coordinating with those decor names, reducing visual variation from piece to piece. The manufacturer part number 4488-1518-1 gives shops a precise identifier to call out on cut lists and ordering sheets, so the same Arbor Myrtle edge solution is used throughout repeat builds or future replacements. The 600 foot roll format also means one stocked item can service multiple Arbor Myrtle projects, aligning color continuity over time.

Common Questions About Arbor Myrtle Edge Banding

Select PVC Edgebanding 4488 Arbor Myrtle For Color Match

Choose PVC edgebanding 4488 Arbor Myrtle when a project calls for Arbor Myrtle or Roucke, Cinnamon Myrtle tones across panel faces and edges. The combination of 0.018 inch thickness, 15/16 inch width, and a 600 foot roll supports efficient edging while maintaining consistent color and dimensions through Doellken Woodtape part 4488-1518-1.