Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
PVC edgebanding 6007 Windswept Pewter, 0.018 inch thick and 15/16 inch wide, gives you a narrow edge treatment sized for typical 3/4 inch panel projects, so the band slightly overhangs for trimming and a clean, flush finish. The 600 foot roll length supports runs with multiple cabinets or repeated parts, reducing roll changes during production work. This edge banding is identified as color 6007 Windswept Pewter, so you can specify the exact tone across drawings, orders, and shop setups. The documented color match to Wilsonart 4795 Windswept Pewter is rated Good, which ties the band directly to that laminate color family for coordinated casework and fixtures. As a PVC edge banding from Doellken Woodtape, it fits within common shop practices for machining and finishing PVC-based edges on laminate or similar surface projects.
The 15/16 inch width on this edge banding works with typical 3/4 inch panels, giving just enough excess for trimming equipment to cut a crisp edge without exposing substrate. The 0.018 inch thickness sets a modest edge height, which supports predictable results with standard edgebanders and hand trimmers. Because the color match to Wilsonart 4795 Windswept Pewter is rated Good, installers can run this edge alongside that laminate color with a coordinated visual result. The 600 foot roll length supports continuous feeding through edgebanders on cabinet runs or commercial casework, helping keep feed rates and heat settings consistent from part to part.
This Doellken Woodtape PVC edgebanding in color 6007 Windswept Pewter is suited to projects built around the Wilsonart 4795 Windswept Pewter laminate, because the Good color match aligns edge and surface tone. On cabinets, shelving, and casework built from 3/4 inch panels, the 15/16 inch width provides coverage of the core with a slight margin, so the finished edge reads as fully wrapped. The 0.018 inch thickness supports use on doors, drawer fronts, partitions, and vertical panels where a low-profile edge is preferred to keep reveals tight. The 600 foot roll supports shop environments that cut and band multiple parts in sequence, such as kitchens, office furniture, or retail fixtures, where repeated color and thickness are important across every panel.
The combination of 15/16 inch width and 0.018 inch thickness gives fabricators a defined target for edgebander settings, which supports consistent trimming and scraping on each pass. The color 6007 Windswept Pewter identifies the material clearly, so production teams can separate this roll from other grays and maintain the correct match throughout a build. With a Good color match to Wilsonart 4795 Windswept Pewter, the risk of noticeable contrast between face and edge in that scheme is reduced, which is important on long door runs and exposed verticals. The 600 foot roll format means fewer interruptions to splice or swap material, helping maintain steady temperature, feed, and pressure conditions on edgebanding equipment for more uniform results. The manufacturer part number 6007-1518-1 ties these dimensions and color into shop documentation, simplifying reordering the same specification when a project repeats.
This PVC edgebanding is 0.018 inch thick and 15/16 inch wide, giving a slim edge that covers typical 3/4 inch panels with a small overhang for trimming to a flush finish.
The Doellken Woodtape roll is 600 feet long, which supports longer cabinet or casework runs and reduces interruptions caused by changing rolls during production.
This edge banding has a Good color match to Wilsonart 4795 Windswept Pewter, helping the edge align visually with that laminate on coordinated casework or fixtures.
The specific color is 6007 Windswept Pewter, which lets you reference an exact shade when specifying projects or tying edge selection to laminate choices.
This PVC edgebanding is manufactured by Doellken Woodtape, placing it within a recognized line of edge banding products used in woodworking and casework.
Part number 6007-1518-1 identifies this combination of 6007 Windswept Pewter color, 15/16 inch width, 0.018 inch thickness, and roll format for consistent reordering.
This PVC edgebanding 6007 Windswept Pewter, in a 0.018 inch by 15/16 inch by 600 foot roll, gives you defined dimensions and a Good match to Wilsonart 4795 Windswept Pewter. For panel work built around that color scheme, this specification from Doellken Woodtape keeps edge appearance and sizing consistent across cabinets, partitions, and fixtures ordered through Wurth Baer Supply.