Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
PVC edgebanding wrought iron gives a 15/16 inch finished edge that covers common panel thicknesses, so cabinet and casework edges present a consistent, professional band instead of exposed core. The 0.018 inch thickness provides a slim edge profile that blends closely with flat laminate surfaces, helping seams read as a single plane in finished installations. Color 7301 Wrought Iron ties directly to that specific color reference, so shop drawings and orders can call out an exact edgeband identity. The textured surface described for this product supports visual coordination where the face material also has texture, helping the edge look integrated rather than glossy against a matte field. Supplied on a 600 foot roll, this continuous length supports longer production runs with fewer changeovers, which helps maintain setup consistency across a job. The product class as edge banding defines its role as the finishing material on exposed board edges.
The 15/16 inch stated width gives installers and shop operators a known margin beyond common 3/4 inch panels, so trimmers can clean both faces without risking a starved edge. The 0.018 inch thickness means the band sits close to the laminate plane, which keeps the corner profile tight when trimming and scraping. Being supplied in a 600 foot roll format supports feeding through automatic edgebanders that accept continuous PVC band, so setups can be dialed in once and run for an extended sequence. Identifying the product as PVC edgebanding or edge banding clarifies that it is intended for bonding along linear board edges instead of as a broad surfacing sheet. The association to a specific wrought iron color helps the band visually tie into that color family wherever it is applied along exposed edges.
This edge banding is identified as PVC Edgebanding & Surfacing, so it is suited to woodworking and cabinet projects that finish raw panel edges with PVC tape rather than leaving substrate visible. The 15/16 inch width pairs naturally with panels in the cabinet and casework range, giving coverage for doors, shelves, and dividers where a slim overhang is needed for trimming. With color 7301 Wrought Iron and a reference to Nevamar S6054 Wrought Iron, this band is oriented toward projects using that color family on laminate or surfacing, so edges can follow the same tone. The textured note in the web description indicates that this band is set up to coordinate with textured decorative faces, which is useful on projects where both surface and edge are expected to read with similar sheen and feel.
The 0.018 inch thickness of this PVC edgebanding sets expectations for how it behaves under trimmers and scrapers, giving a light edge that can be brought nearly flush to the face without building a heavy corner. The consistent 15/16 inch width makes edgebander and guillotine setups straightforward across a run of parts, so operators can repeat settings when processing multiple jobs in the same wrought iron color. The 600 foot roll provides enough material to handle larger batches of panels or repeat orders using the same Nevamar S6054 Wrought Iron color match, helping color and texture stay uniform from piece to piece. The manufacturer part number 7301-1518-1 ties all of these characteristics to a single ordered item, which simplifies reordering when shops standardize on this specific wrought iron edge band.
This PVC edgebanding is 15/16 inch wide, so it covers typical cabinet and casework panel edges with extra width for trimming to a clean, flush finished edge.
The 7301 Wrought Iron edge band is 0.018 inch thick, giving a slim edge profile that trims close to the laminate face and keeps corners from feeling bulky.
This edge banding, listed under Edgebanding & Surfacing, suits woodworking, cabinet, and furniture projects that use PVC band on exposed panel edges.
The 600 foot roll length supports longer runs on automatic edgebanders, so shops can process many parts in the same color with fewer roll changes.
The Nevamar S6054 Wrought Iron color match means this PVC edgebanding is set to coordinate with that decorative surface color for visually aligned edges.
Part number 7301-1518-1 identifies this specific Doellken Woodtape PVC edgebanding, tying together its wrought iron color, 15/16 inch width, and 0.018 inch thickness.
This Doellken Woodtape PVC edgebanding in color 7301 Wrought Iron, matched to Nevamar S6054 Wrought Iron, gives shops a defined edge solution for that color family. The 15/16 inch width, 0.018 inch thickness, and 600 foot roll length align with common cabinet and casework workflows, so it can be specified as the standard edge detail wherever this wrought iron tone is carried across a project.
Sold In: 600 Lineal Ft