Edgebanding 4125, Hardrock Maple .020" Thick x 1-5/16" Width

Edgebanding 4125 Hardrock Maple For Laminate Jobs

Edgebanding 4125 Hardrock Maple identifies a Doellken Woodtape PVC edge banding designed to finish board edges in a Hardrock Maple tone. The .020 inch thickness keeps the edge profile slim, which supports a clean transition from surface to edge on casework or shelving. The 1-5/16 inch width gives coverage for common board thicknesses while allowing a trim margin, which helps achieve a flush edge after trimming without exposing the core. Being part of the Edge Banding product class means this material is intended to cover raw edges, so the substrate edge is visually tied into the selected surface design. The Hardrock Maple identification in the product name signals a light maple appearance, helping shops align this banding with matching decorative surfaces.

Key Hardrock Maple Edgebanding Details For Shops

• The .020 inch thickness provides a low-profile edge, which helps maintain a subtle seam at the joint between surface and edge during machining and finishing.
• The 1-5/16 inch width offers extra coverage over standard panel thicknesses, which supports consistent trimming results and reduces the chance of revealing the panel core.
• The Doellken Woodtape brand identifies a dedicated edge banding manufacturer, which helps shops align this product with existing edgebanding workflows using similar PVC materials.
• The 4125 designation within the product name ties to a specific color series, which simplifies reordering the same Hardrock Maple appearance across repeat projects or replacement work.
• The Manufacturer Part # 4125-2120-1 gives an exact identifier, which aids in matching this same edgebanding when coordinating across purchasing, shop notes, and installation documentation.

Hardrock Maple Edgebanding Fit And Application Use

The 1-5/16 inch width on this Hardrock Maple edgebanding provides working room for application on edges while still trimming back to a flush line, supporting tight visual alignment with the finished face. The .020 inch thickness helps maintain a modest buildup at the edge, which can be helpful when running through edgebanders or trimming by hand on detailed cabinetry parts. As a PVC edgebanding from the Edgebanding & Surfacing category, this product is suitable where a synthetic edge solution is desired to coordinate with laminate or TFL panels in a Hardrock Maple appearance. The Hardrock Maple designation in the SAP description matches the visual intent of the product name, helping designers and installers maintain color continuity from panel faces to exposed edges in finished work.

Using This Doellken Woodtape Edgebanding On Projects

Where This Hardrock Maple Edgebanding Fits Best

The Web Description notes that the color is a close match to American Laminates Fusion Maple, which positions this Hardrock Maple edgebanding for use alongside Fusion Maple surfaces when a coordinated edge is required. The same description states that it is a good match for Arclin H7749 Hardrock Maple, supporting use on projects that specify that Arclin decor. It is also described as a good match for KML KMD749 Hardrock Maple, helping align the edge appearance with KML boards using that design. A good match to Pionite WM791 Hardrock Maple in a suede finish supports projects using that decorative surface while still maintaining a Hardrock Maple edge tone. The description also lists a good match to Pluswood 97W Hardrock Maple II, extending its usefulness to work built with that design. Finally, it is described as a close match to Thermo Pressed TFL-020 Hardrock Maple, tying this edgebanding to applications using that specific TFL decor where close color coordination is important on exposed edges.

Why These Maple Color Matches Support Consistent Results

The identified close match to American Laminates Fusion Maple helps reduce visible contrast at the edge when panels carry that Fusion Maple design, which supports uniform casework runs in commercial or residential projects. The good match callout for Arclin H7749 Hardrock Maple lets fabricators specify a single edgebanding when using that Arclin decor, simplifying material coordination across production and installation. The good match to KML KMD749 Hardrock Maple aids in maintaining a continuous Hardrock Maple look across doors, drawer fronts, and cabinet boxes built from KML panels. When the edge is a good match to Pionite WM791 Hardrock Maple N_Suede, installers can wrap exposed edges while keeping the suede-finished maple appearance visually consistent around door and panel perimeters. The good match with Pluswood 97W Hardrock Maple II gives builders a single Hardrock Maple edge option across Pluswood-based cabinetry or fixtures, which can streamline inventory planning. Listing Thermo Pressed TFL-020 Hardrock Maple as a close match supports projects using that TFL pattern, helping the finished edge read as part of the same Hardrock Maple design family.

Common Questions About This Hardrock Maple Edgebanding

Selecting This Hardrock Maple Edgebanding For Work

This Edgebanding 4125 Hardrock Maple .020 inch Thick x 1-5/16 inch Width from Doellken Woodtape combines a defined Hardrock Maple appearance with a slim, trimmable profile suited to casework and panel fabrication. The documented close and good color matches to American Laminates, Arclin, KML, Pionite, Pluswood, and Thermo Pressed TFL Hardrock Maple designs help align this edge material with specific surface decors. For shops and installers needing a PVC edge banding that coordinates with these named Hardrock Maple patterns, this product offers a clearly identified option ready to integrate into existing edgebanding processes.