Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
10 foot power cord with roll switch supplies 120V power to Hardware Concepts, Inc. xenon pucks in the Economy Linkable Pucks line, so installers can feed a run of puck lights from a single switched cord connection. The product belongs to the Power Cords and Switches class, which means it is built specifically to handle powering and switching for lighting rather than general extension use. The cord is identified by manufacturer part 5.13000-099, tying it directly to the Hardware Concepts xenon puck system for consistent sourcing across projects. Because these xenon pucks are linkable up to 20 lights to one power cord, this cord acts as the main supply point for multi-light runs, supporting longer, continuous lighting lines from one control.
This 5.13000-099 power cord with roll switch ties into a xenon puck system that operates directly on 120V, so it serves as the primary feed without an external transformer in the circuit. Because the pucks are linkable up to 20 lights to one power cord, the cord supports extended runs where multiple fixtures are daisy-chained from that single supply. Each puck providing 24 inches of lead wire on both sides gives flexibility in how the cord-fed line is routed around cabinets or casework while maintaining continuity between fixtures. In practice, installers can route the cord to the first puck, then use the lead lengths to bridge from puck to puck within the linkable rating.
In the Hardware Concepts, Inc. Economy Linkable Pucks setup, this xenon puck light power cord with roll switch functions as the starting point of the lighting chain. It brings 120V power from the supply to the first puck, so the rest of the linkable pucks can follow in sequence. The system specifies that xenon pucks are linkable up to 20 lights to one power cord, which defines how many fixtures can be connected downstream of this cord on a single run. Because every puck has 24 inches of lead wire on both sides, the cord-fed first puck can be positioned at a logical starting location, then subsequent pucks can be routed along a cabinet bottom or recess using the available lead length between each connection point. The puck housings are made of durable plastic with finishes in white, black, gold, matte chrome, and chrome, so the light heads powered from this cord can visually align with surrounding decorative or functional hardware. Since the xenon pucks may be surface or recess mounted, the cord-fed system can serve both exposed and built-in applications while drawing directly on the specified 120V supply.
The 10 foot power cord with roll switch and its defined 120V rating give installers a clear electrical basis for planning xenon puck layouts, because the cord matches the operating voltage of the fixtures and eliminates separate transformer placement. The manufacturer part number 5.13000-099 links this cord directly to the Economy Linkable Pucks line, so replacement or expansion work can reuse the same reference and maintain consistency across jobs. The linkable up to 20 lights to one power cord specification lets planners calculate how many xenon pucks can be run from a single cord, which helps balance runs on larger installations. The 24 inches of lead wire on both sides of each puck supports flexible spacing between lights once the cord is tied into the first unit, creating room to adjust light positions relative to cabinet width or work areas. The frosted glass lens on the powered pucks softens the output at each fixture, so runs driven by this cord deliver diffused light instead of direct point glare. Because the system is defined as not requiring a transformer, the workflow focuses on routing the cord, setting the pucks, and linking up to the rated quantity, which keeps the installation steps centered on placement rather than extra components.
The 5.13000-099 power cord is designed for Hardware Concepts, Inc. Xenon Pucks Economy Linkable Pucks, so it matches that specific system for straightforward power connection.
The power cord works with a system rated linkable up to 20 lights to one power cord, so one cord can serve a substantial line of xenon pucks.
The power cord is specified for 120V power, so it feeds the xenon puck system directly at that voltage without a separate transformer in the line.
The power cord with roll switch provides on/off control on the cord itself, so the linked xenon puck lights are switched right at the power source location.
Each puck in this system has 24 inches of lead wire on both sides, so once powered by the cord, installers can bridge between fixtures with that length.
The xenon puck fixtures used with this cord do not require a transformer, so the 120V power cord connects directly for a simpler lighting layout.
The 10 foot power cord with roll switch, manufacturer part 5.13000-099, is built for Hardware Concepts, Inc. xenon Economy Linkable Pucks that operate directly on 120V. With support for linkable up to 20 lights to one power cord, this cord helps lay out extended runs from one switched feed. The 24 inches of lead wire on both sides of each puck gives room to position fixtures along cabinets or recesses once the cord powers the first unit. For projects calling for durable plastic puck housings in white, black, gold, matte chrome, or chrome finishes with frosted glass lenses, this cord provides the defined starting point for the system.
Sold In: 1 Each