Adhesives & Caulks Cardbaord Solidz .018" Thick x 15/16" Width
Description
Doellken Woodtape Edge Banding For Clean Edges
Doellken Woodtape edge banding identified as Adhesives & Caulks Cardbaord Solidz .018" Thick x 15/16" Width provides a defined PVC edge that covers raw panel edges, so cabinet and furniture projects present a finished, uniform look. The .018 inch thickness establishes a slim edge profile, which helps maintain the visual line of doors, drawer fronts, and casework without adding bulk. The 15/16 inch width offers coverage across standard panel thicknesses while leaving room for trimming, which supports tight visual alignment along the face. Supplied as Cardbaord Solidz material in the edge banding and surfacing category, it ties into laminate and surfacing work where color and texture coordination is planned. The PVC construction places this product in the edgebanding, PVC class, which suits scenarios where an applied edge is preferred over exposed substrate.
Key Edge Banding Details For Daily Work
- The .018 inch thick profile sets a consistent, low-build edge, helping panels retain their intended dimensions while still covering substrate.
- The 15/16 inch width gives working room for trimming after bonding, supporting clean, flush alignment with the panel face.
- The Cardbaord Solidz identification provides a defined design reference, aiding selection when matching edges to related surfacing materials on a job.
- The PVC edge banding classification places the product within typical shop workflows that use PVC for cabinet and furniture edges.
- The manufacturer part number 6136-1518-1 gives an exact code for reorders, reducing mis-picks and keeping repeat projects visually consistent.
Installation Fit Supported By Size Details
The .018 inch thickness of this Doellken Woodtape edge banding provides a modest build that bonds over panel edges without significantly changing door or drawer clearances, which is important when working to tight reveals. The 15/16 inch width offers slight overhang beyond many common panel thicknesses, creating room to trim back to a flush edge after bonding. Being in the edgebanding, PVC group, this material fits into established edging workflows where a consistent PVC strip is applied to raw edges to protect the core. The defined width and thickness together help installers plan trimming, scraping, or flush-routing passes in line with shop standards.
Using This Edge Banding In Cabinet Shops
Where This PVC Edge Banding Is Applied
This Doellken Woodtape edge banding is part of the Edge Banding product class, so it serves as the finishing strip for exposed board edges in cabinetry, furniture, and similar panel-based work. The Cardbaord Solidz designation ties it to surfacing selections where an edge detail is planned to match or coordinate, helping projects present a unified appearance around doors, shelves, and casework. Positioned under Edgebanding & Surfacing | Edgebanding, PVC, it aligns with applications that rely on PVC strips for everyday production, from commercial casework to residential cabinetry. The 15/16 inch width supports use on panels around that dimension, giving adequate coverage for both square and lightly profiled edges when trimmed.
Why Size And Part Number Support Consistency
The stated .018 inch thickness allows installers to anticipate how the edge will sit relative to laminate or other face materials, supporting planning for minimal lip or transition at the corner after trimming. Because the width is exactly 15/16 inch, cutting and routing setups can be standardized for this size, which helps reduce adjustment time between runs. The manufacturer part number 6136-1518-1 provides a precise identifier when specifying or reordering, which helps maintain the same Cardbaord Solidz appearance from job to job. Being identified as a PVC edge banding within Edgebanding & Surfacing means this material type stays consistent with many existing shop processes, which supports repeatable bonding and trimming outcomes across multiple projects.
Common Questions About This Edge Banding
What material category is this edge banding in?
This product is listed as Edgebanding & Surfacing | Edgebanding, PVC, so it fits workflows that use PVC strips for finishing panel edges.
How thick is the Doellken Woodtape edge banding?
The edge banding is .018 inch thick, which creates a slim, low-build edge that helps preserve door and drawer clearances after application and trimming.
What is the width of this Cardbaord Solidz strip?
The strip is 15/16 inch wide, providing coverage over typical panel edges and giving extra material for trimming back to a flush finish.
How long is the PVC edge banding roll?
The SAP description states 600FT/RL, indicating a 600 foot roll length, which supports longer runs and multiple projects from a single roll.
How is this edge banding identified for reordering?
This edge banding carries the manufacturer part number 6136-1518-1, helping shops call out the exact product when restocking.
What product name should I reference in project notes?
The product name is Adhesives & Caulks Cardbaord Solidz .018" Thick x 15/16" Width, which describes its thickness, width, and Cardbaord Solidz designation.
Selecting This Edge Banding For Your Work
This Doellken Woodtape edge banding from Wurth Baer Supply combines a .018 inch thickness with a 15/16 inch width and Cardbaord Solidz identification, giving shops a clearly defined PVC option for edging projects. The 600 foot roll length supports extended production runs, while the 6136-1518-1 part number and detailed description simplify ordering for repeat jobs. When a project calls for PVC edging that aligns with surfacing selections, this product provides the defined size and design reference needed to plan consistent edge treatment across cabinets and furniture.