Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Knape & Vogt 8900 Series is a 14 inch, full-extension, side-mount ball-bearing drawer slide built for shop floors, utility rooms, garages, and production cabinets where raw capacity matters more than a decorative finish. The zinc plate keeps the steel protected through daily use, and the 500 lb per pair rating puts this squarely in heavy-duty territory for a standard side-mount design.
A 500 lb rating in a 14 inch slide opens up applications that standard cabinet hardware simply cannot cover. Tool chests, machinist benches, and parts drawers in fabrication shops routinely carry loads that crush lighter slides; the 8900 Series is built for those environments. The 14 inch length suits shallower utility cabinets and workbench drawers where a longer slide would overhang the cabinet back. Full extension means a mechanic or technician can pull the drawer all the way out and see everything inside without fishing around at the rear. Standard motion is an asset here, not a limitation: drawers that hold heavy tooling need to stay open while both hands are occupied, and there is no soft-close mechanism to fight against a loaded pull.
Zinc plating over steel is the workhorse finish in this category. It resists the light moisture and shop humidity that would corrode bare steel, and it blends into utility interiors without drawing attention. This is not a decorative finish — it is a protective one. If the installation is in a finished kitchen or a display cabinet where the hardware will be visible, a different finish is the right call. For garages, workshops, server racks, utility rooms, and back-of-house commercial casework, zinc is exactly what the environment calls for. The 3/4 inch side clearance required per side is standard for side-mount ball-bearing slides in this class; size the drawer box accordingly.
Cabinet shops building shop furniture, commercial millwork outfits specifying utility casework, contractors fitting out garages or mechanical rooms, and facilities teams replacing slides on heavy-duty storage units are all working in the right range. The 8900 Series is not the slide for a kitchen renovation or a bathroom vanity, but for any project where the drawer is going to carry real weight and the hardware needs to hold up without fuss, the combination of full extension, 500 lb capacity, and zinc durability makes a straightforward argument.
The 500 lb capacity is the per-pair rating for the set as listed. Load both slides together as a system rather than applying the full figure to a single member.
Yes. Full extension brings the entire drawer out to the cabinet face so everything inside is reachable, including items at the very back.
No. The 8900 Series uses standard motion, meaning no closing mechanism of any kind. The drawer rides freely on the bearings and stays wherever it is pushed.
Each slide requires 3/4 inch of clearance between the drawer box side and the cabinet interior, so build the drawer box 1-1/2 inches narrower than the opening overall.
Yes. The 8900P 14 is non-handed, so both slides in the pair are identical and install on either side without modification.
When the drawer needs to carry 500 lb, open completely, and hold up in a demanding utility environment, the 8900 Series in zinc delivers exactly that — without complication and without compromise.
Sold In: 1 Set
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Set |  KV8900P-30 Mfr# 8900P 30 | KV 8900 30" Side Mount Full Extension Slide Zinc Polybag Knape and Vogt 8900P30 |
