Schaub Michelangelo Bronze knob describes this Schaub and Company 703-MIBZ part as a solid brass, Michelangelo Bronze finish knob with a 1-1/4 inch diameter. That combination gives you a compact, traditional-style pull point sized well for many cabinet and furniture doors needing a single centered knob. The 3/4 inch base diameter supports the head so load transfers cleanly to the door face, which helps the knob feel stable in normal cabinet use. A 7/8 inch projection sets the hand clearance from the front of the door or drawer, so fingers can comfortably grip without the knob jutting excessively into walkways. The material is solid brass, so the knob body is one consistent metal rather than a thin shell, which supports a firm feel at the hand contact point. The Michelangelo Bronze finish defines the visible surface tone so it visually coordinates with other Michelangelo Bronze decorative hardware in the same space.
This Schaub and Company 703-MIBZ knob uses a 1-1/4 inch diameter face with 7/8 inch projection, so door and drawer faces gain a compact pull that stays close to the surface while leaving enough finger room to grasp from the front. The 3/4 inch base diameter determines the footprint that contacts the cabinet, providing a clear seating area for boring and layout. An 8-32 screw size specification defines the thread standard used to secure the knob through the panel, which supports consistent drilling and tapping choices when planning shop jigs. Because the knob is part of the Traditional Series in Michelangelo Bronze, its dimensions and finish align with that design family, giving installers a repeatable reference when laying out knob positions across multiple cabinet runs.
The Schaub Traditional Series 703-MIBZ knob, with its 1-1/4 inch diameter, suits cabinet doors and drawers that benefit from a modestly sized pull point, such as kitchen, bath, or built-in storage fronts designed around traditional styling. The 3/4 inch base diameter supports use on standard cabinet rail and stile widths, so the bearing surface sits neatly within common frame dimensions. A 7/8 inch projection keeps the knob closer to the face of the cabinet, which works well on fronts located near adjacent doors, panels, or appliances where low-profile hardware is preferred. The solid brass construction makes this knob appropriate for projects where metal weight and density matter at the touch point, aligning with higher-end cabinet installations that specify brass decorative hardware. The Michelangelo Bronze finish coordinates visually with other Michelangelo Bronze components from the same Traditional Series, which is useful when fitting multiple hardware types in one room.
The defined 1-1/4 inch diameter of the 703-MIBZ knob gives installers a fixed reference for boring layouts and jig setups, which helps keep centerlines consistent from door to door. The 3/4 inch base diameter determines how much flat area is needed on the face, so rail and stile designs can be planned knowing the knob footprint will seat fully without overhanging profiled edges. The 7/8 inch projection provides a predictable stand-off distance that can be factored into clearance checks between cabinet fronts, walls, and adjacent hardware, helping reduce later adjustments. The 8-32 screw size specification standardizes the through-hole diameter and threading choices, which simplifies repeating the same drilling process across a run of cabinets. Because the knob is solid brass in the Traditional Series Michelangelo Bronze finish, cabinetmakers can match additional Schaub Michelangelo Bronze cabinet hardware while maintaining the same tactile feel and visible tone from piece to piece.
The Schaub 703-MIBZ knob has a 1-1/4 inch diameter head, a 3/4 inch base diameter, and a 7/8 inch projection, which defines the grip area, bearing footprint, and stand-off from the cabinet face.
The 703-MIBZ Michelangelo Bronze cabinet knob is made from solid brass, giving a single-metal body that provides a substantial feel at the hand contact point during regular cabinet operation.
The Schaub Traditional Series 703-MIBZ uses a Michelangelo Bronze finish, so its visible tone and sheen coordinate with other Michelangelo Bronze decorative hardware specified for the same project.
The 703-MIBZ knob is specified with an 8-32 screw size, so installers can base drilling and threading choices on that standard cabinet hardware thread specification.
The Schaub Michelangelo Bronze knob projects 7/8 inch from the cabinet face, establishing consistent finger clearance while keeping the hardware relatively close to surrounding surfaces.
The 703-MIBZ solid brass knob belongs to the Schaub Traditional Series, aligning its style and Michelangelo Bronze finish with other pieces from that design family.
The Schaub Michelangelo Bronze knob 703-MIBZ combines solid brass construction, a 1-1/4 inch diameter face, and 7/8 inch projection in a Traditional Series Michelangelo Bronze finish, giving installers a defined set of dimensions and visual characteristics to match across cabinet runs. The 3/4 inch base and specified 8-32 screw size provide clear mounting references, which supports efficient drilling and hardware placement on doors and drawers. For projects calling for Schaub Traditional Series Michelangelo Bronze cabinet hardware, this knob gives a consistent size, material, and finish reference point to use throughout the layout and installation process.