Schaub Solid Brass Knob For Cabinet Projects

Schaub solid brass knob describes a 1-1/2 inch diameter cabinet knob from the Traditional Series that gives doors and drawers a defined hand grip and a consistent look across the run. The solid brass material provides a dense feel at the touch point, which matters when cabinets see regular daily use. The Michelangelo Bronze finish establishes a dark, traditional tone on the face of the knob, helping it blend with bronze hinges or other bronze decorative hardware. The knob uses a 1 inch base diameter, so the load spreads across more surface on the cabinet face, which reduces concentrated pressure on the door or drawer front. With a 1 inch projection off the surface, the knob stands out far enough for fingers to comfortably pull from different angles without crowding the cabinet face.

Key Details That Support Cabinet Hardware Work

• The 1-1/2 inch diameter head gives a generous gripping surface, which helps when operating heavier cabinet doors or wide drawers where leverage and control are important.
• The 1 inch base diameter creates a broad footprint on the wood, which helps distribute pull forces and can reduce the chance of visible denting around the mounting hole over time.
• The 1 inch projection positions the knob away from the door surface, which improves finger clearance and keeps knuckles from rubbing the cabinet finish during frequent opening and closing.
• The solid brass construction provides a single, consistent material through the knob, which supports a uniform feel and weight that many installers and clients expect on higher-end cabinet hardware.
• The Michelangelo Bronze finish supplies a bronze-toned surface, which helps align this knob with other Michelangelo Bronze or similar bronze decorative hardware on the same project.
• The 8-32 x 1 inch screw size specification defines the thread and length, which helps match the knob to properly tapped mounting holes in typical cabinet door and drawer fronts.

Cabinet Knob Fit, Dimensions, And Mounting Use

This 1-1/2 inch diameter cabinet knob is sized for typical cabinet doors and drawer fronts, giving enough face area to grab without overwhelming smaller fronts. The 1 inch base diameter sets the contact area against the cabinet, which matters when lining up multiple knobs so the base edges stay consistent along the rail or stile. With a 1 inch projection, the knob projects straight out from the surface in a compact profile that still preserves finger space behind the head. The 8-32 x 1 inch screw size specification defines the threaded interface, so the knob works with a standard cabinet knob mounting approach through a drilled hole.

Using The 704-MIBZ Knob In Cabinet Layouts

Where This Michelangelo Bronze Knob Fits Best

The Schaub and Company 704-MIBZ knob belongs to the Traditional Series, so its Michelangelo Bronze finish and rounded profile suit cabinets built around classic or traditional styling. On doors, the 1-1/2 inch diameter offers a centered grip point that works well when installed near the stile edge, helping users open tall or short doors with the same hand motion. On drawer fronts, that same diameter keeps the knob visually proportional on standard-width drawers while still offering a comfortable pull point at the center. The 1 inch projection keeps the knob compact, which helps when drawers or doors are closely spaced because it limits how far the hardware extends into walkways.

Why These Schaub Knob Details Matter In Use

The solid brass material of this knob means the core and exterior are the same metal, which provides a consistent feel as hands contact the knob repeatedly over the life of the cabinets. The Michelangelo Bronze finish controls the surface color and visual character, which matters when tying together hinges, pulls, and other knobs in a coordinated decorative hardware layout. The defined 1-1/2 inch diameter and 1 inch base diameter give predictable proportions, which help installers set accurate spacing and alignment from door edges and rails to achieve a uniform sightline. The 1 inch projection sets a fixed stand-off from the cabinet face, so once the mounting hole is placed, the resulting clearance remains consistent across an entire bank of doors and drawers.

Common Questions About The 704-MIBZ Brass Knob

Select The 704-MIBZ Knob For Coordinated Cabinets

The Schaub and Company 704-MIBZ solid brass knob pairs a 1-1/2 inch diameter grip with a 1 inch projection to support everyday cabinet use. The Michelangelo Bronze finish and Traditional Series styling help align doors and drawers with a consistent hardware look.