Berenson Plymouth Series brushed nickel knob gives cabinet doors and drawers a solid brass pull point in everyday use, so installers get a dependable grip location that feels consistent from job to job across a run of fronts.
The knob uses a 1-1/4 inch diameter face, creating a defined contact area that is easy to catch even on narrow drawer fronts or smaller doors, which supports quick, repeatable operation in kitchens, baths, or shop-built furniture.
A base diameter of 3/4 inch steps the knob down cleanly to the door or drawer surface, helping the transition look proportional while leaving a clear edge for cleanup around the footprint after finishing or touch-up work.
The 1-1/8 inch projection moves the hand away from the cabinet face, so fingers clear typical door and drawer edges without rubbing the finish, which is especially useful on deeper profiles or when fronts sit close together.
The brushed nickel finish presents a muted metallic surface that helps conceal minor fingerprints and handling marks during installation, keeping the face looking even while other trades are still working in the space.
Construction in solid brass provides a dense feel when operated, adding a sense of weight that suits higher-end cabinetry where a hollow knob might feel out of place in daily use.
The Plymouth knob uses a 1-1/4 inch diameter body and 1-1/8 inch projection, so layout on door and drawer fronts can be planned with predictable clearances from adjacent edges, other knobs, and opposing doors in corner situations.
A 3/4 inch base diameter means the bearing surface at the cabinet face stays tight, which helps the knob sit neatly on narrow rails while still covering a standard drilled mounting hole without exposing raw material around the contact area.
The 8-32 screw size interfaces with the threaded core of the knob, tying into a familiar fastener standard that works efficiently with common cabinet drilling patterns and existing shop jigs for through-bore hardware.
The specified 1 inch screw length connects the knob through typical cabinet door or drawer front thicknesses, so installers can anticipate thread engagement and pull-down pressure when tightening into wood or composite substrates.
The Plymouth Series cabinet knob lands in the Decorative Hardware & Moldings category as a Berenson knob, placing it squarely in typical residential and light commercial cabinet projects where a defined pull point is required on framed or frameless fronts.
The 1-1/4 inch width supports use on a wide range of door sizes, from smaller bath vanities to wider kitchen drawers, so shops can specify one diameter across most fronts without constantly changing drilling jigs or layout spacing.
With a 3/4 inch base diameter, the knob seats well on face frames, slab doors, and applied fronts, giving enough bearing surface on the material while keeping visual bulk under control on slimmer profiles like narrow utility cabinets.
The brushed nickel finish ties into many contemporary and transitional designs, so the same knob can be used across kitchens, baths, and built-ins, helping keep hardware consistent even when casework styles change between spaces.
Being part of the Plymouth Series also allows this knob to coordinate with other pieces in the same family, so large installations can maintain a connected look across doors, drawers, and other hardware locations.
The 1-1/4 inch diameter and 1-1/8 inch projection give installers fixed reference numbers for jig setup, letting drilling templates and CNC programs position the mounting hole so fingers have reliable clearance and the knob registers visually where designers expect.
A 3/4 inch base diameter helps the knob cover the drilled hole while keeping the landing zone small, which is useful when touching up finish around the footprint after install because the contact ring is clearly defined and easy to work to.
The solid brass material contributes weight to each pull, which translates into a more substantial feel at the door edge, reinforcing the perception of sturdy hardware every time a cabinet is opened in high-use areas.
The 8-32 screw thread standard means the knob interfaces with a widely used cabinet fastener size, so shops can align their boring operations and hardware bins around a common thread, simplifying assembly steps on the bench.
The 1 inch screw length works with typical door and drawer front thicknesses, offering consistent thread engagement in the knob and pulling the base firmly against the surface for a snug, rattle-free feel in operation.
The brushed nickel finish manages light reflection, so under cabinet lighting or direct window light does not produce harsh glare off the knob face, keeping the hardware visually calm across an entire run of fronts.
The Plymouth knob 1-1/4 inch diameter has a 1-1/4 inch wide face, 3/4 inch base diameter, and 1-1/8 inch projection, which together define its footprint, clearance, and visual scale on cabinet fronts.
The 1-1/8 inch projection spaces the grip away from the door or drawer surface, giving fingers room behind the knob and reducing contact with finished faces during daily opening and closing.
The Berenson Plymouth Series brushed nickel knob is made from solid brass, providing a dense, weighty feel and a robust body for repeated cabinet door and drawer operation.
The brushed nickel finish creates a muted metallic surface that softens reflections, helping the knob coordinate with other brushed fixtures while downplaying minor handling marks and light variations.
This cabinet knob uses an 8-32 screw size, matching a common cabinet hardware thread that integrates smoothly with standard drilling patterns and installation methods.
The 9956-1BPN-P part number identifies this specific Berenson Plymouth Series solid brass knob in brushed nickel, helping shops specify and reorder the exact model for consistent projects.
The Berenson Plymouth Series brushed nickel knob brings a 1-1/4 inch diameter solid brass grip, 3/4 inch base, and 1-1/8 inch projection together in a predictable package that supports clean cabinet layouts and comfortable everyday operation.
With its brushed nickel finish, 8-32 screw interface, and defined Plymouth Series identity, this knob fits directly into professional cabinet, vanity, and millwork runs where matching hardware and repeatable sizing matter.
For projects ordered through Wurth Baer Supply, this Berenson Plymouth knob provides a straightforward, spec-driven choice when a solid brass, brushed nickel, 1-1/4 inch diameter pull point is required across doors and drawers.
Sold In: 1 Each