Schaub Cast Mountain Bronze knob describes a solid bronze cabinet knob from Schaub and Company, so every pull on a door or drawer uses a dense metal part that supports a substantial, precise feel in daily use. The knob comes from the Cast Bronze Mountain collection, which sets a consistent design language across a project so matching doors and drawers keep a unified appearance. An antique silver finish over the bronze gives the knob a muted metallic tone that helps it sit cleanly against both painted and stained wood fronts in typical cabinet layouts. The 1-3/8 inch, or 35 mm, diameter head spreads hand contact over a wider area, which helps reduce pressure on fingers when operating heavier cabinet fronts. A 1-3/8 inch projection positions the grip out from the door surface, giving fingers room to catch the edge without scraping knuckles along adjacent faces during regular operation.
The 1-3/8 inch diameter on this Schaub and Company knob establishes a medium-size pull point, which helps it work across both narrow and wider cabinet fronts without looking undersized or crowding surrounding trim. With a 5/8 inch base diameter, the contact point against the door or drawer concentrates the load in a defined circle, so installers can align the base neatly over layout marks for clean, repeatable positioning. The 1-3/8 inch projection brings the gripping surface forward, which provides enough depth to grab from above or below when drawers sit beneath countertops. The knob uses an 8-32 thread, tying directly to common cabinet knob installation practices so drill sizes and tap patterns match established shop workflows. Together, these dimensions guide hole placement and drilling depth so rows of knobs track straight along rails and stiles on built-in cabinetry.
The 781-AS antique silver knob from Schaub and Company belongs to the Cast Bronze Mountain collection, so it fits projects that specify this series for a coordinated hardware schedule across kitchens, baths, or built-ins. As a solid bronze knob in the decorative hardware and moldings category, it suits cabinet doors and drawer fronts where a metal pull point ties into surrounding hinges and decorative trim. The 1-3/8 inch diameter works well on face-frame cabinetry, where rails and stiles often leave limited mounting real estate, because the head size defines a clear grip without overpowering narrow frames. A 5/8 inch base diameter keeps the bearing surface tight enough to sit comfortably on standard door rails while still covering the drilled hole cleanly. The antique silver finish on solid bronze supports use on painted cabinets where a softer metal tone coordinates with light colors, and on stained wood where the finish provides a defined but controlled contrast around each pull location.
The solid bronze construction of this Cast Bronze Mountain series knob gives each piece a consistent weight, which helps a run of cabinets feel uniform when users pull on different doors and drawers along a wall. The specified 1-3/8 inch projection defines how far every knob stands off the surface, allowing installers to keep reveals even when hardware lines up across adjacent cabinets. With the 1-3/8 inch, or 35 mm, head diameter, drilling jigs can be set so knob centers align with visual cues like rail centers, keeping sightlines straight from one cabinet to the next. The 5/8 inch base diameter concentrates the mounting area, so when installers tighten an 8-32 fastener through the front, the load transfers directly through the base for a secure feel against the door or drawer front. Because the knob sits in the Schaub and Company decorative hardware line, its consistent dimensions help shops standardize layout measurements, reducing rework when repeating the same hardware pattern across multiple rooms.
The knob has a 1-3/8 inch, or 35 mm, diameter head, a 5/8 inch base diameter, and a 1-3/8 inch projection, which guides drilling layout and clearance planning on cabinet fronts.
The 781-AS cabinet knob is made from solid bronze, providing a dense, rigid body that supports a firm pull feel on doors and drawers in regular cabinet use.
This Cast Bronze Mountain series knob uses an antique silver finish on solid bronze, giving a muted metallic look that coordinates with other antique silver cabinet hardware.
This Schaub and Company cabinet knob uses an 8-32 thread, matching standard cabinet knob installation practices for doors and drawers.
The 1-3/8 inch projection sets how far the knob stands off the surface, helping align installations so adjacent doors and drawers open without contacting neighboring fronts.
The 781-AS knob belongs to the Cast Bronze Mountain collection, supporting coordinated cabinet hardware selections across matching doors and drawer fronts.
The Schaub Cast Mountain Bronze knob in antique silver, with its 1-3/8 inch diameter, 5/8 inch base diameter, and 1-3/8 inch projection, gives installers defined dimensions for consistent cabinet layouts. The solid bronze construction and 8-32 mounting interface fit established shop drilling patterns, supporting repeatable runs of doors and drawers where the Cast Bronze Mountain collection is specified. For projects that call for antique silver decorative hardware on cabinetry, this 781-AS knob provides a clearly documented option that aligns size, finish, and thread details in one part.