Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Schaub Cast Mountain Bronze knob from the Cast Bronze Mountain collection gives cabinets a solid bronze pull point in an antique silver finish, so doors and drawers gain a distinctive handhold that suits detailed woodworking and decorative hardware layouts.
The solid bronze material provides a substantial feel at the touchpoint, which matters when doors or drawers are opened frequently in built-in cabinetry or fine furniture projects where long-term tactile quality is important.
The 1-7/8 inch, or 48 mm, diameter face spreads the contact area across the front of the knob, which helps distribute hand pressure and creates a visual focal point that matches larger door and drawer fronts used in many custom installations.
The 1-1/4 inch projection sets the distance between the cabinet face and the gripping surface, leaving fingers clearance to pull comfortably while keeping the knob close enough to the surface for a tidy profile across door and drawer runs.
The Schaub and Company branding identifies this knob as part of a coordinated decorative hardware line, which supports consistent styling when multiple knobs are specified across a kitchen, bath, or built-in installation.
The Scotts Cast Mountain Bronze Series Antique Silver knob uses an 8-32 thread size, so it mates with standard 8-32 machine screw threading commonly used in cabinet doors and drawer fronts, supporting straightforward alignment through typical bore holes.
The 1-7/8 inch diameter face and 1-1/4 inch projection work together to establish the overall reach of the knob from the cabinet surface, which influences how doors swing clear of adjacent fronts and how comfortably hands can grasp the knob from different angles.
The 1 inch width dimension defines the body thickness of the knob, which shapes the edge profile that fingers catch when pulling, contributing to a secure grip on heavier doors or deeper drawers.
By tying the Cast Bronze Mountain collection identity to these specific measurements, this knob offers predictable geometry when it is laid out across multiple fronts, enabling consistent alignment and visual rhythm down a full cabinet run.
The Collection: Cast Bronze Mountain designation places this knob within a family meant for decorative hardware and moldings, so it suits cabinet doors, drawer fronts, and furniture pieces that call for a prominent, sculpted pull point rather than a low-profile tab.
The antique silver finish on solid bronze makes the Schaub and Company knob suited to installations where the metal needs to read as a softer tone, allowing it to coordinate with satin fixtures or aged metals while still delivering the weight of bronze beneath the finish.
The 1-7/8 inch diameter works well on cabinet layouts that feature wider rails or larger drawer faces, because the broader front of the knob holds its own visually against larger wood expanses without disappearing into the panel design.
The 1-1/4 inch projection allows this knob to function on both doors and drawers, since the stand-off keeps knuckles away from the cabinet surface as the hardware is pulled, which can help reduce incidental contact with finished wood or laminate fronts.
The placement of this knob in the Decorative Hardware & Moldings|Knobs category confirms its role as a primary pull on cabinetry, so it fills the central gripping function in a hardware schedule rather than serving as a secondary or concealed fitting.
The Manufacturer Part # 782-AS ties the knob to a specific Schaub and Company pattern, giving installers a precise reference when matching existing hardware or specifying multiple units across phases of a project.
The 8-32 thread size connects directly to standard cabinet drilling practices, so once a bore is prepared to accept that thread, the knob seats consistently across doors and drawers, promoting uniform alignment of knobs along a run.
The 1 inch width and 1-1/4 inch projection define the body envelope of the knob, which helps layout work, because clearances between adjacent doors, countertops, or walls can be assessed using these fixed dimensions.
The solid bronze construction provides a stable base for the antique silver finish, so edges and contact points remain supported by a single metal body, which matters when knobs are gripped repeatedly along their perimeter during everyday cabinet use.
The 1-7/8 inch (48 mm) diameter face gives installers a known reference when spacing knobs from door edges or drawer sides, since the distance from centerline to edge can be predicted for visual balance along rails and stiles.
The classification under Knobs and Emtek-related hardware connects this part to broader decorative schemes, where matching a particular style number such as 782-AS helps maintain continuity of look across replacement work or expansions of existing cabinetry.
The Schaub 782-AS knob has a diameter of 1-7/8 inches, or 48 mm, which provides a broad contact surface and a strong visual presence on cabinet doors and drawers.
The knob projects 1-1/4 inches from the cabinet face, giving finger clearance for gripping while keeping a compact profile suitable for doors and drawers.
The knob is made from solid bronze with an antique silver finish, combining a dense metal base with a softer-toned surface that coordinates with many decorative hardware schemes.
The Schaub Cast Mountain Bronze knob uses an 8-32 thread size, aligning with common cabinet knob screw threading for straightforward installation through standard door and drawer bores.
The 1 inch width defines the knob body thickness, shaping how it fits between fingers and supporting a secure grip on heavier cabinet doors or deeper drawers.
The antique silver 782-AS knob belongs to the Cast Bronze Mountain collection from Schaub and Company, helping coordinate cabinet hardware across a unified decorative style.
The Schaub Cast Mountain Bronze knob, part number 782-AS, combines solid bronze construction, an antique silver finish, a 1-7/8 inch diameter face, and 1-1/4 inch projection, offering a defined geometry that supports consistent cabinet layouts across doors and drawers.
By matching its 8-32 thread, dimensions, and Cast Bronze Mountain collection styling to your cabinet plan, this knob from Wurth Baer Supply can be specified wherever a substantial bronze pull point with measured clearances is needed.