Schaub Cast Mountain Bronze Series Verde Imperiale 1-7/8" (48 mm) Diameter Knob, - 782-VI

Schaub Cast Mountain Bronze Knob For Cabinets

Schaub Cast Mountain Bronze knob defines this solid bronze cabinet knob as a decorative part built for cabinets and casework where metal hardware sets the look. The knob belongs to the Cast Bronze Mountain collection, so it follows that series aesthetic across doors and drawers on the same job. The Verde Imperiale finish identifies a specific bronze color tone, which helps keep finishes consistent when matching with other Verde Imperiale pieces on a project. The knob uses solid bronze construction, giving it a metal feel at the touch point that suits higher-end cabinetry. A 1-7/8 inch diameter face creates a broad grip area, which helps on heavier doors or larger drawers. A 1 inch width detail defines the footprint against the cabinet surface, which matters when laying out reveals or when aligning with trim details on the door or drawer front. A 1-1/4 inch projection sets the stand-off from the face, shaping how fingers clear the edge of the door in daily use.

Key Bronze Knob Details For Cabinet Projects

• The knob is made from solid bronze, which creates a substantial feel at the hand contact point and helps it visually match other bronze-based decorative hardware on the same installation.
• The Verde Imperiale finish defines a consistent color and surface look, which matters when several knobs are laid out across a run of doors or drawers that need the same visual tone.
• The 1-7/8 inch diameter establishes a large contact surface, which gives fingers more purchase when operating wider doors or deeper drawers that place more load on the hardware.
• The 1 inch width sets the contact footprint against the cabinet face, which is useful when spacing hardware relative to panel edges, rails, or stiles on detailed door designs.
• The 1-1/4 inch projection specifies how far the knob stands off the surface, which affects both clearance for fingers and how far the hardware extends into walk paths or tight spaces.
• The knob uses an 8-32 x 1 inch screw size, which aligns with common cabinet drilling practices and supports straightforward threading into standard cabinet door and drawer front materials.

Bronze Knob Fit, Dimensions, And Mounting Use

This knob is defined as part of the Cast Bronze Mountain collection, giving installers a clear series name when pairing with pulls from the same line. The 1-7/8 inch diameter dimension gives a reliable reference when laying out centerlines so knobs do not crowd adjacent trim or appliance handles. A 1-1/4 inch projection creates a stand-off that helps fingers wrap behind the knob, useful on thicker doors where edge clearance is tighter. The 1 inch width determines how the base lands on rails or narrow drawer faces, guiding layout decisions on small fronts. An 8-32 thread with 1 inch screw length sets the fastening interface, which coordinates with typical cabinet drilling operations and standard hardware tooling.

How This Cast Bronze Mountain Knob Works In Practice

Where The Verde Imperiale Knob Fits Best

This knob sits in the Cast Bronze Mountain collection from Schaub and Company, so it aligns with projects where that specific series is already specified. The Verde Imperiale finish places it in a bronze color family intended for decorative hardware applications that call for that named finish. With a 1-7/8 inch diameter, the knob suits wider cabinet doors or substantial drawer fronts where a small knob might look undersized, creating better visual balance across a bank of cabinets. The 1 inch width defines how it rests against stile or rail sections, which matters when mounting on narrow rails to avoid overhanging the profile. A 1-1/4 inch projection gives the knob presence off the face, which supports easier gripping on thicker overlay doors since the stand-off provides finger room between the knob edge and the door surface.

Details That Support Consistent Cabinet Results

The solid bronze material anchors this knob in metal construction, which supports a uniform tactile feel when the same knob is repeated across a kitchen or bath installation. The Cast Bronze Mountain collection naming gives designers and installers a clear identifier to specify throughout drawings and ordering lists, reducing confusion between series. The Verde Imperiale label ties finish and color to a defined name, which helps maintain finish continuity when ordering additional hardware for later phases or change orders. The 1-7/8 inch diameter and 1 inch width provide dependable layout dimensions, so drilling jigs and templates can be set once and repeated across multiple fronts without re-measuring. The 1-1/4 inch projection sets a predictable reach into the room, which is useful when aligning knobs along walk paths to keep hardware depth consistent. The 8-32 x 1 inch screw size defines the connection point to the cabinet, allowing installers to work with a threading pattern that is standard in cabinetry and simplifies hardware selection for matching components.

Common Questions About This Bronze Cabinet Knob

Selecting This Knob For Cabinet Hardware Runs

The Schaub Cast Mountain Bronze knob in the Cast Bronze Mountain collection combines a 1-7/8 inch diameter, 1-1/4 inch projection, and solid bronze construction for decorative cabinet use. The Verde Imperiale finish and 8-32 x 1 inch screw size provide defined parameters for matching finish, layout dimensions, and fastening across doors and drawers on the project.