Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The BACKPLATE, SOLID BRASS from Schaub and Company is a Versailles Series backplate that pairs with decorative cabinet hardware to create a defined mounting footprint. It uses solid brass construction, which provides a sturdy metal base that supports pull or knob loading in everyday cabinet use. The satin nickel finish presents a muted metallic surface that visually blends with satin nickel pulls, helping projects maintain a consistent hardware look across doors and drawers. A length of 7-3/16 inches covers a noticeable section of the cabinet face, so the backplate defines a clear visual band behind the pull while also masking minor surface flaws under that footprint. The 1 inch width keeps the profile narrow, which concentrates the appearance into a straight, linear strip that suits traditional and transitional layouts. As part of the Versailles Series, this backplate aligns with that collection's styling, supporting coordinated installations across the same job.
This Schaub and Company 763-15 backplate is 7-3/16 inches long and 1 inch wide, giving installers a clearly defined rectangle to align horizontally on doors and drawers. The 3-3/4 inch center to center dimension is designed to line up with pulls drilled on that same spread, so the backplate seats directly over the existing pair of mounting holes without layout changes. A projection of 1/8 inch means the face of the backplate stands slightly proud of the cabinet surface, which creates a small step that visually separates the hardware from the door or drawer face while keeping the overall stack relatively low profile.
The 763-15 BACKPLATE 7 3/16" X 1" from the Versailles Series is sized and finished for use behind cabinet pulls or knobs set on a 3-3/4 inch center to center layout. The satin nickel finish is intended to coordinate with satin nickel decorative hardware, so it supports installations where all visible metal pieces follow the same finish family. With a 7-3/16 inch overall length, the backplate visually suits both standard doors and many drawer fronts, because the span is long enough to register as a design element without overwhelming typical cabinet rail heights. The 1 inch width lets the backplate sit comfortably on narrow stiles or rails, so it can be used across upper and lower cabinets while keeping a consistent visual band wherever it is installed.
The solid brass body of this Schaub and Company backplate provides a firm substrate around the pull fasteners, which supports repeatable tightening of 8-32 fasteners through the hardware stack. The 3-3/4 inch center to center dimension is fixed into the backplate layout, so each piece positions the pull or knob consistently along the same spread from cabinet to cabinet when that drilling pattern is used. A projection of 1/8 inch establishes a small reveal between the cabinet face and the backplate, which helps installers visually check straightness as they align the backplate along drawer edges and door rails. The satin nickel finish matches satin nickel decorative hardware in tone, which simplifies finish coordination on multi-room projects using the Versailles Series. The overall 7-3/16 inch by 1 inch size repeats that same footprint across doors and drawers, producing a uniform band behind each pull for a controlled, planned appearance.
The 763-15 backplate measures 7-3/16 inches in length and 1 inch in width, so it spans a defined strip behind the pull and creates a consistent visual band on cabinet faces.
This Schaub and Company backplate is laid out for a 3-3/4 inch center to center dimension, aligning with cabinet pulls drilled on that same hole spacing for straightforward fitment.
The BACKPLATE, SOLID BRASS is made from solid brass with a satin nickel finish, combining a metal body with a subdued metallic surface that coordinates with satin nickel hardware.
The Schaub and Company 763-15 backplate has a projection of 1/8 inch, creating a slight stand-off from the cabinet face that adds a subtle layered effect behind the pull or knob.
This backplate is part of the Versailles Series from Schaub and Company, so it aligns in styling and finish intent with other Versailles Series decorative hardware pieces.
The manufacturer part number is 763-15, which identifies this specific Versailles Series satin nickel solid brass backplate for ordering and matching alongside related hardware.
The BACKPLATE, SOLID BRASS 763-15 from Schaub and Company pairs a 7-3/16 inch by 1 inch footprint with a 3-3/4 inch center to center layout, giving cabinet projects a defined satin nickel band behind each pull. For work specifying Versailles Series satin nickel hardware, this solid brass backplate provides a consistent, repeatable mounting footprint across doors and drawers while keeping the projection to 1/8 inch for a low-profile stack. Use this part number when a satin nickel backplate is required to match 3-3/4 inch spread pulls in the Versailles Series.