Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Schaub Versailles solid brass backplate defines a precise 3-3/4 inch center-to-center pull layout, so knobs or pulls line up accurately on doors or drawers that follow this hole spacing. The 7-3/16 inch length establishes a generous footprint behind the pull, which helps visually frame the hardware on the cabinet face. A 1 inch width keeps the profile slim, so the backplate adds detail without crowding narrow rails or stiles. Solid brass material gives this backplate a substantial feel, supporting long-term use in decorative hardware installations. The antique light polish finish provides a classic brass tone, which supports traditional styling across the Versailles Series. The 1/8 inch projection keeps the backplate close to the surface, which helps pulls feel integrated with the door or drawer front during everyday use. This configuration suits decorative hardware layouts where consistent spacing and proportion are important.
The 3-3/4 inch center-to-center specification defines the distance between mounting holes for this backplate, so drilling or existing holes with the same spacing will align with the backplate openings. The stated length of 7-3/16 inches and width of 1 inch give clear outer dimensions, which helps plan door and drawer layouts where spacing between edges, panels, or adjacent hardware matters. The 1/8 inch projection keeps the installed backplate nearly flush to the cabinet face, which supports comfortable hand clearance at the pull while preserving a close fit to the surface. The 8-32 screw size identifies the thread standard used with this backplate, so matching 8-32 threaded pulls or knobs can be paired for a consistent hardware assembly.
The Versailles Series designation ties this solid brass backplate to Schaub and Companys decorative hardware family, so it suits projects that repeat Versailles pulls or knobs for a coordinated look. The antique light polish finish lets this 7-3/16 inch by 1 inch plate act as a visual base on cabinet doors or drawers that call for a warm brass tone. With a 3-3/4 inch center-to-center layout, the backplate aligns with pulls drilled to that common spacing, which fits many cabinet and furniture fronts using this dimension. The slim 1 inch width works on face-frame cabinets and narrower drawer fronts where wider plates could approach edges or moldings. Because projection is only 1/8 inch, the backplate rests close to the surface, which keeps the cabinet profile lean while still adding a defined brass border behind the pull.
The 3-3/4 inch center-to-center measurement acts as a fixed reference when preparing holes across multiple fronts, which helps maintain uniform spacing from one cabinet to the next. Overall length of 7-3/16 inches provides a consistent coverage area, which simplifies aligning plates relative to panel lines, rails, or stile edges. The 1 inch width gives a predictable band of brass around the pull, which helps create a repeatable visual reveal on doors and drawers of similar size. Solid brass material contributes to stable seating when tightening 8-32 fasteners, which can reduce movement at the plate during final alignment. The 1/8 inch projection holds the backplate near flush, which supports smooth transitions between the cabinet front and mounted pull so hand contact stays focused on the pull rather than an exposed edge.
The Versailles Series, solid brass backplate measures 7-3/16 inches in length and 1 inch in width, so it spans a moderate area on the cabinet face behind the pull.
The solid brass backplate is designed for 3-3/4 inch center-to-center spacing, which matches pulls or knobs drilled on that hole distance for straightforward alignment.
The Versailles Series backplate has a projection of 1/8 inch, so it sits close to the cabinet face while still defining a distinct brass border under the pull.
The 763-ALP backplate is made from solid brass, providing a firm base for pulls or knobs and a traditional brass appearance in decorative hardware projects.
The solid brass backplate uses an antique light polish finish, giving cabinets a warm brass tone that aligns with other antique light polish components.
The Versailles Series backplate is specified with an 8-32 screw size, so compatible 8-32 threaded pulls or knobs can be mounted through the plate into the cabinet front.
The Versailles Series, solid brass backplate with 3-3/4 inch center-to-center spacing, 7-3/16 inch length, and 1 inch width offers a defined brass base for pulls mounted on that layout. Pairing its antique light polish finish and 1/8 inch projection supports a traditional, low-profile appearance. For projects using 8-32 threaded decorative hardware in this spacing, this Schaub and Company 763-ALP backplate provides a consistent dimension set to plan cabinet fronts, drawer faces, and matching hardware runs across the job.