Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Solid brass backplate describes this Schaub and Company Versailles Series part, giving a metal base that supports a cabinet pull while matching higher-end decorative hardware projects. The oil rubbed bronze finish provides a dark, traditional look that coordinates with oil rubbed bronze pulls on doors or drawers. The 7-3/16 inch length spreads the pull footprint across more of the cabinet surface, which helps visually balance wider drawer fronts and taller doors. At 1 inch width, the backplate frames the pull without overwhelming narrow rails and stiles. The 3-3/4 inch center to center drilling matches common pull spacing, so it pairs with many pulls that share this hole pattern. A 1/8 inch projection keeps the plate close to the surface, maintaining a low profile that works well on both face-frame cabinets and frameless fronts where excess stand-off is unwanted.
The 3-3/4 inch center to center drilling sets the mounting geometry for this Versailles Series backplate, aligning it with pulls drilled on the same spacing so the plate sits properly under the pull posts. The 7-3/16 inch overall length leaves visible metal extending beyond the mounting posts, which creates a framed look above and below the pull while still fitting most standard cabinet fronts. At 1 inch width, the backplate leaves surrounding field area on wider rails, which can help keep detailed profiles or edge treatments visible. The 1/8 inch projection keeps the plate nearly flush to the door or drawer surface, helping the pull feel directly connected to the cabinet face without a bulky step.
This Versailles Series backplate measures 7-3/16 inches long and 1 inch wide, so it suits cabinet doors and drawers where a medium-length metal accent is desired behind a pull. The 3-3/4 inch center to center measurement matches common pull drilling, which makes it suitable for layouts already planned around that hole spacing. On taller doors, the 7-3/16 inch plate adds a defined vertical or horizontal band behind the pull, visually anchoring the hardware on flat panels. On drawers, that same length covers a central section of the front, which helps tie together wide faces without extending too close to edges. Because the projection is 1/8 inch, the plate stays close to the face of the cabinet, which works well in kitchens or baths where fronts pass close to adjacent doors, trim, or appliances.
The 3-3/4 inch center to center dimension aligns the backplate holes with pulls drilled on that spacing, which simplifies repeating the same layout across a run of doors and drawers. This consistent drilling means the 7-3/16 inch length repeats the same visual proportion wherever it is used, supporting uniform sight lines on stacked or banked fronts. The 1 inch width focuses the visual weight directly behind the pull posts, which helps keep the hardware grouping crisp rather than spreading across a large field. Solid brass construction gives the plate a sturdy feel at the mounting area, which supports the connection between pull posts and the cabinet surface during daily use. The oil rubbed bronze finish unifies these geometry choices into a single visual statement, supporting projects built around oil rubbed bronze cabinet hardware from Schaub and Company.
The backplate measures 7-3/16 inches in length and 1 inch in width, which defines the footprint available behind a cabinet pull on doors or drawers.
The backplate has a 3-3/4 inch center to center measurement, so it aligns with pulls drilled on the same 3-3/4 inch hole spacing.
The Versailles Series backplate is made from solid brass, providing a robust metal base at the pull connection point on cabinet fronts.
The 763-10B backplate has an oil rubbed bronze finish, which matches oil rubbed bronze decorative hardware on cabinets.
This Schaub and Company backplate has a projection of 1/8 inch, keeping it close to the cabinet surface for a low-profile install.
The backplate is specified with 8-32 screw sizing, so it is designed around pulls using standard 8-32 threaded posts.
The solid brass backplate from Schaub and Companys Versailles Series combines a 7-3/16 inch by 1 inch footprint with a 3-3/4 inch center to center layout in an oil rubbed bronze finish. These confirmed dimensions and finish details support planned cabinet runs based on 3-3/4 inch pull drilling and oil rubbed bronze decorative hardware. For projects where consistent geometry, solid brass construction, and traditional oil rubbed bronze styling are required together, this 763-10B backplate from Wurth Baer Supply delivers a clearly defined option.