A Zinc-Finished Ball Bearing Drawer Slide Built for Serious Cabinet Work

The Pro Value PRO Series 22 inch full-extension side-mount ball bearing drawer slide is a 250 lb rated, hold-in equipped workhorse finished in zinc and sized for kitchen, office, and utility cabinet drawers. Sold as a pair, it gives cabinet shops and contractors a high-capacity, non-handed slide they can install on either side without sorting hardware at the bench.

Key Features

• 250 lb weight capacity per pair — handles loaded kitchen drawers and heavy shop storage well above the standard 100 lb cabinet class.
• Full extension — the intermediate member carries the drawer completely clear of the cabinet face so the rear contents are reachable.
• Hold-in anti-rebound detent — a mechanical catch keeps the drawer closed and prevents it from bouncing back open after a firm push shut.
• Non-handed design — both slides in the pair are identical, so either one mounts on either side of the drawer box.
• 1/2 inch side clearance per side — the standard side-mount spacing, so the box is built 1 inch narrower than the cabinet opening.
• Steel ball bearings in full-length raceways — smooth, consistent travel under a full load across the slide's service life.

Where a 250 lb Slide Earns Its Place

A 22 inch side-mount slide at 250 lb per pair is substantially heavier-rated than the standard 100 lb cabinet class, which opens it up to applications that would stress an economy slide. Deep kitchen drawers stacked with cast iron cookware, shop drawers holding hand tools and jigs, and utility cabinet drawers in garages or mechanical rooms are the right fit. Full extension means the drawer comes all the way out — the back corner of a loaded deep drawer is accessible, not buried behind the cabinet face. The hold-in detent adds practical value in shop and garage settings where a drawer left ajar is a hazard; it keeps the drawer seated until intentionally pulled.

Zinc Finish on Steel Construction

The slide members are cold-formed steel with a bright zinc finish. Zinc plating is the working standard for side-mount ball bearing slides: it provides indoor corrosion resistance and holds up across years of daily cycles without flaking or binding. This is a functional finish on hardware that sits beside the drawer box and is mostly out of sight when the drawer is closed. The zinc surface pairs cleanly with white, almond, and natural wood cabinet interiors without competing for attention.

Who Reaches for This Slide

Cabinet shops running production work where standard-class slides fall short of the load spec will find the 250 lb rating useful without stepping into specialty heavy-duty hardware. Contractors fitting out utility rooms, garage storage, or commercial cabinetry get a non-handed, full-extension slide they can pull from one bin for every drawer on the job. Homeowners building out a workshop or a serious kitchen pull-out will find this slide sized for the task. In a face-frame cabinet, add matching rear mounting brackets at the back of the slide — they are sold separately and are series-specific, so confirm the bracket matches the PRO series before ordering.

A Reliable Slide Ready for Heavy Pulls

At 250 lb per pair, full extension, and a hold-in detent in a standard 1/2 inch clearance format, this Pro Value PRO Series slide handles the loads that push standard kitchen slides to their limit — without stepping outside the familiar side-mount setup every installer already knows.