Omega National oak plate rack gives you a ready-to-assemble plate display solution built around 36 inch long rails and matching dowels, so you can create a consistent plate rack section inside kitchen or bath cabinetry. This P1100OUF2 rack is designed as a plate display rack, so it organizes plates in a dedicated section rather than relying on generic shelving. The rack uses 36 inch long top and bottom rails, which helps align with standard cabinet spans where a 3 foot interior opening is planned. Each RTA kit uses 12 inch long dowels, creating a plate support grid that keeps dish storage in a predictable vertical layout. The design mirrors the assembled Omega National plate racks, so you get an assembled height of 13-1/16 inches when the parts are put together, which keeps the rack profile suitable for typical wall cabinet interior heights.
This Omega National plate rack RTA kit uses 36 inch long top and bottom pre-drilled rails, so the dowel locations are fixed and you fit the assembled rack lengthwise into a 36 inch cabinet span. The rails are drilled for 3/8 inch diameter dowels at 2 inches on center, which guides dowel placement so spacing is uniform without onsite layout work. The 12 inch long dowels tie the top and bottom rails together to establish the 13-1/16 inch assembled height, which defines the vertical opening for plates within the cabinet interior. Because the rack is designed to be ready-to-assemble, the drilling pattern and dowel count are matched, which streamlines assembly and keeps the final layout consistent with other Omega National plate rack installations.
The Omega National oak plate rack in this P1100OUF2 configuration is built around 36 inch long rails, so it is suited for cabinet interiors where a 36 inch plate display span is planned. The rack functions as a front and back pair of plate racks, which means one rack positions dowels near the cabinet front and the other at the rear, creating a defined bay that holds plates in a vertical row. With 28 dowels at 12 inches long, you get enough vertical members to run a series of channels that separate individual plates across the 36 inch width. The assembled height of 13-1/16 inches sets the boundaries of the plate display field, so plates rest between the rails within that vertical dimension in everyday use. As part of Omega National plate racks for kitchen and bath cabinet accessories, this layout supports projects where a dedicated display zone for plates is part of the overall cabinet plan.
The ready-to-assemble design uses pre-drilled 36 inch top and bottom rails, so every dowel position is defined, which leads to uniform spacing and an organized appearance when the rack is installed. The 3/8 inch diameter dowels used in the P1100OUF2 rack combine with the 2 inch on-center drilling to create a regular rhythm of supports, which helps plates sit in evenly spaced channels across the width of the cabinet. With 28 dowels in round or fluted styles, the rack provides a continuous series of supports, which is useful when the goal is to display a full set of plates without irregular gaps. The assembled height of 13-1/16 inches repeatably matches Omega National assembled plate racks, so projects using both assembled and RTA versions present a consistent visual line. The rack is specified as solid unfinished wood in the available species noted by Omega National, so it arrives ready for the finishing system selected for the rest of the cabinet run.
The P1100OUF2 RTA plate rack assembles to 13-1/16 inches tall and 36 inches long, so it fits cabinet layouts designed around a 36 inch wide plate display section.
The P1100OUF2 rack uses 28 pieces of 12 inch long, 3/8 inch diameter dowels spaced 2 inches on center between 36 inch rails, so plates sit in evenly spaced vertical channels.
The P1100OUF2 RTA kit is configured to make a front and back pair of racks, so you can create a defined plate bay with support near the cabinet front and rear.
The P1100OUF2 plate display rack is available in solid unfinished wood species noted by Omega National, so it can be finished to coordinate with cabinet finishes.
The P1100OUF2 RTA rack assembles to the same 13-1/16 inch height and 36 inch length as assembled Omega National plate racks, so projects use a consistent rack profile.
The P1100OUF2 rack is part of Omega National plate display racks for kitchen and bath cabinet accessories, so it suits cabinet runs that feature dedicated plate display sections.
The Omega National oak plate rack RTA kit P1100OUF2 provides a 36 inch long, 13-1/16 inch tall plate display layout built around pre-drilled rails and 3/8 inch diameter dowels, giving you a predictable, repeatable plate bay in cabinet projects. The defined dowel spacing at 2 inches on center, combined with 28 dowels at 12 inches long, creates uniform channels ready for plate storage across the cabinet width. For kitchen or bath installations where a plate display rack is part of the design, this ready-to-assemble configuration offers a straightforward path to an organized plate section using Omega National plate display rack components.
Sold In: 1 Pair