Berenson Overture Series Rustic Nickel 1-5/16" (33 mm) Diameter Knob, - 7115-1RN-C

Berenson Overture Rustic Nickel Knob For Cabinets

Berenson Overture rustic nickel knob is a zinc die cast knob designed as decorative cabinet hardware for doors and drawers. The 1-5/16 inch diameter face spreads pull force comfortably across the hand, helpful on frequently used kitchen or shop cabinets. Its rustic nickel finish provides a muted metallic look that pairs well with many stained or painted surfaces in woodworking projects. The 1 inch projection sets the hand grip away from the cabinet face, giving fingers clearance during daily use. A base diameter of 1/2 inch focuses contact at a small footprint, which fits well on narrow rails or stiles. The knob mounts using an M4 x 45mm screw, matching a common metric installation standard. As part of the Berenson Overture Series, it keeps visual style consistent when used across multiple doors and drawers in the same run.

Key Knob Details That Support Cabinet Work

• The 1-5/16 inch diameter face gives a broad pulling surface, which distributes load across the front of the knob for a solid feel when opening heavier cabinet doors or larger drawers.
• The 1 inch projection positions the grip off the cabinet face, which provides finger clearance and reduces contact between hands and finished surfaces during repeated opening and closing.
• The 1/2 inch base diameter concentrates the mounting area, which helps this knob land cleanly on narrow rails or tight layouts without visually crowding adjacent edges or profiles.
• The zinc die cast material provides a consistent molded form, which supports clean edges and smooth contours important for a comfortable, repeatable grip in daily cabinet use.
• The rustic nickel finish establishes a subdued metallic appearance, which helps the knob blend with a range of hinge finishes and decorative trims on cabinetry and furniture.
• The M4 x 45mm screw sizing matches a common metric mount, which simplifies planning hole sizes and depth when drilling fronts in a production or retrofit setting.

Cabinet Knob Mount And Fit Details

This Berenson Corporation knob uses an M4 x 45mm screw connection, which ties the 1/2 inch base firmly to the cabinet front through a single centered bore. The 1-5/16 inch diameter matches many standard layout assumptions, so it sits proportionally on typical door and drawer widths. With a 1 inch projection, the installed knob extends just far enough to clear door profiles while staying tight to the face for a compact look. The zinc die cast build keeps dimensions consistent from piece to piece, useful when aligning multiple knobs in straight runs across upper and lower cabinets. Its rustic nickel finish maintains one visual tone across the knob body, supporting uniform appearance wherever it is used in the project.

Using This Berenson Overture Knob In Projects

Where This Rustic Nickel Knob Works Best

The Overture Series rustic nickel knob functions as decorative hardware for cabinets and similar woodworking projects, fitting both doors and drawers that suit a 1-5/16 inch diameter pull point. The 1 inch projection supports grip on face-frame and frameless cabinets, because fingers can wrap behind the knob while staying close to the front. Its 1/2 inch base diameter makes sense on narrow stile applications, such as small bath cabinets or upper doors, where oversized bases might crowd panel details. The zinc die cast construction supports repeatable sizing, so when multiple 7115-1RN-C knobs are laid out on banks of drawers, their faces align consistently along a visual line. The rustic nickel finish lets the knob sit comfortably beside other nickel-toned components in the shop, such as hinges or hooks, for unified project appearance.

Details That Support Repeatable Cabinet Results

The 1-5/16 inch diameter of this Berenson Overture Series knob sets a predictable center point, which simplifies spacing from door edges and from neighboring knobs during layout. M4 x 45mm screw sizing defines the through-hole requirement, giving installers a known diameter to drill and a length suited to many standard cabinet front thicknesses. With 1 inch projection, door and drawer fronts open without knuckles rubbing the surface, which helps finished coatings experience less contact over time. The 1/2 inch base diameter creates a defined bearing area against the wood, which helps the knob seat neatly when the mounting hole is drilled on center. Because the knob is zinc die cast, its molded form maintains the same proportions piece after piece, valuable when aligning several knobs along long cabinet runs or matching replacements later under the same part number.

Common Questions About This Berenson Cabinet Knob

Choose This Knob For Consistent Cabinet Layouts

The Berenson Overture rustic nickel knob pairs a 1-5/16 inch diameter face with 1 inch projection, giving a familiar size that suits many cabinet runs. With zinc die cast construction and an M4 x 45mm mount, it offers predictable dimensions for drilling and layout work. The 1/2 inch base and rustic nickel finish help this knob sit cleanly on narrow rails while aligning with other nickel-toned decorative hardware. For projects built around Berenson Corporation styling, this Overture Series knob lets doors and drawers share a common look across the workspace.