Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Rev-A-Shelf telescoping shaft hardware set provides the center post assembly needed to build or rebuild a full circle lazy susan with three shelves, adjusting to fit cabinet heights between 38 and 46 inches.
A lazy susan needs more than shelves and a bearing to function well. The center shaft is the structural spine of the whole assembly: it sets the height, aligns the shelves vertically, and transfers rotational load between the cabinet floor and ceiling. Without a correctly sized, rigid post, shelves wobble and bind. This telescoping shaft adjusts within the 38 to 46 inch range, so it can be dialed to the actual interior height of the cabinet rather than cut to length. That matters most during a replacement or retrofit, where the cabinet is already built and the post has to fit precisely.
The zinc finish on this hardware set is a practical choice for a component that lives inside a cabinet and is rarely seen once installed. Zinc-finished metal hardware resists surface oxidation in the dry interior environment of a kitchen cabinet, and the finish coordinates with the hardware tone of other components in the 4WLS series. The metal shaft maintains its geometry under the repeated rotational loads of a loaded three-shelf system, holding shelf alignment over years of daily use.
This set is the right choice when building a new full circle lazy susan in a corner base cabinet or a tall cabinet with an interior height between 38 and 46 inches, and when three shelves are part of the design. It is also the correct replacement part when an existing post in the 4WLS series is damaged or needs to be swapped out during a renovation. Cabinet shops building lazy susans in volume will want to confirm that the shelf diameter, bearing type, and shelf material they are specifying all draw from the same 4WLS series so the assembly goes together cleanly. This shaft hardware set does not include shelves or swivel bearings, which are sold separately.
No. This is the telescoping shaft hardware set only. Full circle shelves and swivel bearings are separate items and are sold individually within the Rev-A-Shelf 4WLS series.
No. This hardware set is designed for full circle shelf shapes. Kidney and pie-cut configurations require different hardware within the Rev-A-Shelf line.
The shaft extends and locks within the 38 to 46 inch range so it spans the exact distance between the cabinet floor and ceiling without cutting. Set the height before final installation.
This set fits cabinets between 38 and 46 inches in interior height. For cabinets outside that range, check the Rev-A-Shelf line for a shaft set sized to your opening.
Choose this zinc hardware set when you need a reliable, adjustable post to anchor a full circle lazy susan, giving three shelves a stable spine to turn on across a range of standard cabinet heights.
Sold In: 4 Set
