Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock BP9338ORB cabinet knob is a Swirl'Z Series zinc die-cast knob designed for cabinet applications where a compact round pull is needed. The 1-1/8 inch (29 mm) diameter head provides a familiar hand feel that suits doors or drawers in tight layouts. An oil-rubbed bronze finish creates a dark, traditional look that aligns visually with other bronze decorative hardware on the same run. The playful lines of the Swirl'Z design break up flat cabinet faces, adding visual movement without changing door construction. A projection of 1-1/2 inches (38 mm) sets the knob far enough off the surface to clear typical finger grip, which helps reduce contact with the cabinet finish during daily use. The zinc die-cast construction gives the knob a solid, consistent form that supports repeat use across multiple openings in a project.
The 1-1/8 inch (29 mm) knob diameter and 3/4 inch (19 mm) base diameter define the footprint this knob will occupy on a door or drawer front, which is important when working near panel edges or narrow rails. A projection of 1-1/2 inches (38 mm) positions the gripping surface forward so hands can engage without bumping surrounding trim or adjacent hardware. The width of 1-1/8 inches (29 mm) aligns with the diameter, keeping the profile compact while still readable on the face of the cabinetry. The specified screw size of 8-32 x 1 inch ties the knob to a standard threaded connection used widely in cabinet construction, which helps installers work efficiently with familiar drilling and fastening practices.
The Swirl'Z Series design gives this knob playful lines that stand out on otherwise plain cabinet doors, so a bank of standard fronts gains visual interest without changing the door style. With a 1-1/8 inch (29 mm) diameter and matching width, the knob remains compact enough for small doors but still visible on larger pantry faces. The 3/4 inch (19 mm) base diameter keeps the bearing surface tight, which suits narrow rails or stile intersections where space is limited. The oil-rubbed bronze finish lets doors tie into other bronze elements, helping maintain a consistent theme across face frames, crown profiles, and other decorative hardware in the same room.
The 1-1/8 inch (29 mm) diameter and 1-1/2 inch (38 mm) projection give fixed reference points for layout jigs, which helps installers set consistent reveals and hand clearance across a full kitchen or bath. A 3/4 inch (19 mm) base diameter defines the contact circle against the door or drawer face, allowing accurate setback from panel edges during layout. The specified 8-32 x 1 inch screw size aligns with common cabinet drilling patterns, so installers can rely on standard bit sizes and through-hole dimensions for repeatable mounting. Using the Amerock Corporation BP9338ORB part number as a specification reference supports uniform replacement or expansion work, because subsequent knobs will match the original diameter, projection, material, and finish.
The BP9338ORB knob has a 1-1/8 inch (29 mm) diameter, 1-1/8 inch (29 mm) width, 1-1/2 inch (38 mm) projection, and a 3/4 inch (19 mm) base diameter, which defines its footprint and hand clearance on cabinet fronts.
The Swirl'Z Series BP9338ORB knob is zinc die-cast, giving it a solid molded body that supports consistent shape and appearance across multiple installation points on a project.
The oil-rubbed bronze finish on the BP9338ORB knob provides a dark traditional appearance that coordinates with other bronze decorative hardware, keeping the project visually unified.
The Amerock BP9338ORB knob uses an 8-32 x 1 inch screw size, so it ties into standard cabinet knob threading and typical through-hole drilling used in cabinet construction.
This Amerock Swirl'Z BP9338ORB knob is used on cabinet doors and drawers where a 1-1/8 inch diameter pull with a decorative oil-rubbed bronze finish is desired.
The BP9338ORB part number identifies this specific Swirl'Z Series zinc die-cast oil-rubbed bronze knob, supporting accurate ordering, matching, and future replacement work.
This oil rubbed bronze cabinet knob from Amerock Corporation pairs a 1-1/8 inch (29 mm) diameter with 1-1/2 inch (38 mm) projection to handle everyday pulling tasks on doors and drawers. The Swirl'Z Series design and zinc die-cast construction offer a consistent decorative hardware option installers can specify under part number BP9338ORB when they want a compact, bronze-finished knob for unified cabinet projects.
Sold In: 1 Each