
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPTS2424 to RSTS2424.
Omega TRA-STA Maple tray organizer is a premium wood tray divider system that separates baking sheets, trays, and similar items inside a cabinet, so each piece has its own guided slot for easier access and neater storage. Four pre-finished maple veneer dividers form the vertical partitions, so they present a clean wood surface that visually matches typical cabinet interiors and gives a finished look when the door is opened. Solid maple grooved and pre-drilled top and bottom rails hold the dividers, so each panel slides securely in a defined track and stays aligned during everyday use. The grooved rail construction creates straight, repeatable channels, which helps installers keep spacing consistent across an entire run. Because the dividers are trimmable, they can be cut to length, which allows the same organizer kit to adapt to different cabinet widths within its size range.
Pre-drilled top and bottom rails give a defined fastening pattern, so installers can set the rail height, align it to the cabinet sides, and drive fasteners through existing holes for predictable positioning. Solid maple construction in the grooved rails provides a firm substrate for mounting, so once the rails are fixed, each divider slides into its groove and remains guided along its full height. Because the dividers are trimmable, they can be cut to fit cabinet interior measurements within the organizer range, which helps keep vertical partitions flush with the face line for a clean presentation. The design is intended to be fastened in multiple locations, so the rail assembly can be tied into cabinet sides or stretchers wherever structure is present.
Omega National tray dividers from the TS2424 system are suited for base cabinetry organizers and fillers, so they fit naturally in lower kitchen cabinets where pans, lids, and baking sheets are commonly stored. The tray organizer is part of the Base Cabinetry Organizers and Fillers product class, which aligns it with projects that convert open cabinet cavities into defined storage lanes. Its maple construction matches typical kitchen and bath cabinet materials, so it visually blends into cabinet interiors when doors are opened. The rail-and-divider layout is designed to accept a variety of pots, pans, or lids, giving flexibility in how each partitioned space is used. Because the four dividers run vertically between the top and bottom rails, they create repeated slots that help keep tall, narrow items from tipping.
The combination of pre-finished maple veneer dividers and solid maple grooved rails gives a consistent wood system, so installers work with stable material that machines and fastens like standard cabinet parts. Pre-finished surfaces reduce finishing steps, so once the organizer is installed and trimmed, the interior is ready for service without further coating or drying time. The grooved rails guide each divider, so slot spacing stays as laid out, which helps maintain even gaps that users come to rely on when returning specific trays to specific positions. Because the top and bottom rails are pre-drilled, fastener positions are already set along the run, which supports square, parallel installation between cabinet sides and minimizes the chance of rails creeping out of alignment. The system is designed to be fastened in multiple locations, so it can be anchored into different cabinet framing patterns while still presenting a unified tray divider layout.
The Omega TRA-STA Maple tray organizer uses four maple dividers in grooved rails to create vertical slots that store trays, pots, pans, or lids in base or similar cabinets.
The pre-finished maple veneer dividers provide a ready-to-use wood surface, so cabinet interiors gain defined tray lanes without additional finishing work after installation.
The solid maple grooved top and bottom rails hold the dividers in defined channels, so partitions stay straight and guided while supporting stored trays.
The top and bottom rails are pre-drilled to provide fixed fastening points, so installers can mount the rails quickly while keeping alignment consistent across the cabinet width.
The trimmable dividers can be cut to length, so the same tray organizer adapts to cabinet widths within its range while keeping partitions flush and evenly spaced.
The TS2424 tray organizer belongs to base cabinetry organizers and fillers, so it fits into layouts that convert open base cabinets into organized vertical tray storage.
The Omega TRA-STA Maple tray organizer combines four pre-finished maple veneer dividers with solid maple grooved and pre-drilled rails, so cabinets gain defined vertical storage lanes built from matching wood components. The trimmable divider design lets one TS2424 system adapt across multiple cabinet widths within its usable range, so installers can apply the same organizer pattern through a run of base cabinets. The layout is designed to be fastened in multiple locations and to accept a variety of pots, pans, or lids, so it supports organized storage where sheet goods and cookware need clear, repeatable slots.
Sold In: 1 Each