Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Rev-A-Shelf trash can spacer kit is a replacement accessory made for custom face frame installations using Rev-A-Shelf 4WCTM series top mount pull out waste containers. This Rev-A-Shelf product, manufacturer part 4WCTM-SP-KIT, is identified as a 4WCTM mounting spacer kit for the 4WCTM series. Buyers searching RS4WCTM-SP-KIT, rev a shelf, or revashelf are typically trying to confirm the correct part for a garbage pull out or garbage pullout setup that needs added spacing in a face frame cabinet. The listed dimensions are 1-1/2 inches wide, 2-7/16 inches high, and 22-7/16 inches deep. If your pull-out waste container install needs a spacer for face frame clearance, this accessory is intended for that specific application.
Key specs to confirm: This trash can mounting spacer kit is listed at 1-1/2 inches wide, 2-7/16 inches high, and 22-7/16 inches deep. It is described for use with Rev-A-Shelf 4WCTM series top mount pull out waste containers and for custom face frame installations. Before buying, confirm that your waste container belongs to the 4WCTM series, that your cabinet uses a face frame design, and that the listed depth aligns with your pull-out hardware position. If you need load, safety, compliance, or other technical ratings, those details are not provided here and should be confirmed with the manufacturer or technical documentation.
What's included: The verified listing identifies this item as the Rev-A-Shelf 4WCTM mounting spacer kit, part 4WCTM-SP-KIT. Specific piece count and hardware contents are not stated in the verified data and should be confirmed before ordering.
What to verify before ordering: Confirm your cabinet is a custom face frame application, verify your pull-out waste container is a Rev-A-Shelf 4WCTM series top mount model, check the listed 22-7/16 inch depth against your cabinet interior, and confirm the included parts if you need fasteners or multiple spacers for the job.
Installers often need a spacer kit when a face frame cabinet changes how a pull-out waste container mounts and travels. In that situation, the issue is not the trash bin itself but the mounting relationship between the cabinet opening and the pull-out assembly. The Rev-A-Shelf 4WCTM series trash can accessory is intended for that kind of custom face frame installation.
If you are replacing a missing part, correcting an older install, or finishing a new garbage pull out project, this accessory gives you a brand-matched part for the verified 4WCTM series. That matters because accessory parts are easiest to use when they are designed around the same series and mounting method. The product description specifically states use with Rev-A-Shelf 4WCTM series top mount pull out waste containers, so buyers should treat series match as a first check.
The listed dimensions also matter in the field. A spacer kit with a depth of 22-7/16 inches should be checked against cabinet interior depth and the pull-out hardware location. The 1-1/2 inch width and 2-7/16 inch height should also be reviewed against the frame, mounting points, and any nearby obstructions. Buyers searching revashelf, rev a shelf, or RS4WCTM-SP-KIT are often trying to avoid ordering a generic part that may not align with the original setup. For that reason, it is smart to confirm the exact series, cabinet style, and needed spacing before purchase.
This product is best viewed as a fit-driven accessory for a specific waste container family. It is not presented as a complete trash can system, a bin, or a universal mounting part. If your project involves a garbage pullout in a frameless cabinet or a different Rev-A-Shelf series, confirm compatibility first rather than assuming cross-fit.
When comparing spacer kits or replacement parts, the main question is usually whether the part matches the cabinet style and the pull-out series already in use. A generic spacer may look similar, but a verified brand and series reference reduces guesswork. This Rev-A-Shelf trash can accessory is identified for custom face frame installations and for use with 4WCTM series top mount pull out waste containers, which gives buyers a clear compatibility path.
Another point to compare is how much information is available for fit confirmation. Here, the listing gives three key dimensions and a named application. That helps installers check the cabinet opening, the frame condition, and the pull-out depth before the order is placed. For replacement work, the manufacturer part number 4WCTM-SP-KIT is also useful because it ties the item to service records, existing build sheets, or prior purchase notes.
For practical buying, focus on three areas: cabinet construction, pull-out series, and required spacer size. If any of those details are uncertain, confirm them before ordering. That approach is especially helpful on custom work where small fit differences can slow installation. A matched Rev-A-Shelf part can simplify that process because the product is described for a defined use rather than a broad universal claim.
The Rev-A-Shelf trash can spacer kit is used for custom face frame installations with Rev-A-Shelf 4WCTM series top mount pull out waste containers.
This trash can mounting spacer kit is verified only for Rev-A-Shelf 4WCTM series top mount pull out waste containers. Confirm other series directly before ordering.
This Rev-A-Shelf product is an accessory part in the replacement bins and accessories class, not a complete waste container system.
A custom face frame cabinet should be confirmed before purchase because the product description specifically calls out that installation type.
The Rev-A-Shelf 4WCTM mounting spacer kit is listed as 1-1/2 inches wide, 2-7/16 inches high, and 22-7/16 inches deep.
The buyer should confirm the waste container is a Rev-A-Shelf 4WCTM series top mount pull out model and that the cabinet is a face frame application.
The verified listing identifies the spacer kit but does not state the exact hardware contents, so included pieces should be confirmed before ordering.
This Rev-A-Shelf trash can accessory may fit a retrofit if the project uses a 4WCTM series top mount pull out waste container in a custom face frame cabinet.
Load and compliance details are not provided in the verified data. Follow manufacturer installation guidance and local building requirements where applicable.
4WCTM mounting spacer kit is a fit-specific accessory for Rev-A-Shelf 4WCTM series top mount pull out waste containers in custom face frame installations. Before purchase, confirm the 4WCTM series match, review the listed 1-1/2 inch by 2-7/16 inch by 22-7/16 inch dimensions, and verify what parts are included with the kit. Taking a moment to check cabinet style, pull-out type, and needed spacing can help you order the correct Rev-A-Shelf trash can accessory for the job.
Sold In: 1 Each
