Schaub Traditional Series knob gives a 1-1/4 inch diameter pull point that suits standard cabinet doors and drawers, so installers can match common drilling layouts in kitchens, baths, and built-ins without changing typical knob spacing. The solid brass construction creates a dense, weighty feel when operated, which helps doors and drawers close with a controlled, positive hand contact that customers notice in daily use. A polished chrome finish reflects surrounding light and colors, so the knob visually aligns with other chrome fixtures on the project for a consistent trim look. The 7/8 inch projection sets the gripping surface out from the cabinet face, giving fingers enough clearance during operation in narrow spaces. A 3/4 inch base diameter spreads the contact area against the door or drawer front, which helps distribute pull forces over more surface during repeated use. The 703-26 part number identifies this exact knob specification for repeat orders and layout documentation.
This Schaub and Company knob is built around a 1-1/4 inch diameter head and 7/8 inch projection, so installers can plan drilling locations with confidence about how far the knob will extend into the user path. The 3/4 inch base diameter establishes the footprint at the door or drawer surface, which helps with positioning when aligning multiple knobs in a row on wide fronts. The knob uses an 8-32 thread interface, so it matches cabinet layouts designed for standard 8-32 machine screw mounting commonly used on residential and commercial casework. The screw length is specified as 1 inch, giving a defined engagement range through typical cabinet front thicknesses when threading into the knob during installation.
This solid brass cabinet knob from the Traditional Series works well wherever a 1-1/4 inch diameter pull is desired on cabinet doors and drawers, because that size balances grip comfort with visual scale on face frames and full-overlay fronts. The polished chrome finish ties into projects that already feature polished chrome faucets, pulls, or decorative hardware, so the knob helps create a unified hardware theme across the room. With a 7/8 inch projection, the knob suits door and drawer faces that open near adjacent cabinets or walls, since the stand-off gives usable finger clearance without pushing hardware too far into walkways. The 3/4 inch base sits comfortably on rails, stiles, or drawer fronts, creating a defined transition between the cabinet surface and the round head for a finished appearance in both traditional and transitional layouts.
The Schaub Traditional Series knob uses solid brass construction, which provides a consistent weight across all installed pieces, so banks of doors and drawers share the same tactile response when pulled. The 1-1/4 inch diameter and 7/8 inch projection remain fixed dimensions, giving installers repeatable centers-to-edge distances during layout, which is especially important on multi-door runs or tall pantry units. The 3/4 inch base diameter creates a clear visual reference when aligning the edge of the base to rail or stile lines, supporting clean sightlines across a row of cabinets. The polished chrome finish presents a uniform, reflective surface from knob to knob, so doors and drawers read as a coordinated set rather than a mix of finishes. The 8-32 threaded connection pairs the knob with the specified 1 inch screw length, delivering a predictable thread engagement depth through common cabinet front thicknesses and promoting a secure, consistent mounting feel across the installation.
The knob has a 1-1/4 inch diameter, giving a comfortable gripping surface that works well on most cabinet doors and drawers without overpowering standard face proportions.
The knob projects 7/8 inch from the cabinet face, providing finger clearance for everyday use while keeping the profile compact near adjacent doors or walls.
The knob is made from solid brass, creating a dense, substantial part that stands up to repeated pulling forces on frequently used cabinet doors and drawers.
This 703-26 knob has a polished chrome finish, so it visually coordinates with other polished chrome hardware and fixtures in the same room or project.
The knob uses an 8-32 thread with a 1 inch screw length, giving a standard machine-screw interface commonly used for cabinet knob mounting.
The knob has a 3/4 inch base diameter, which spreads load on the door or drawer front and provides a defined footprint for visual alignment during layout.
The Schaub Traditional Series knob pairs a 1-1/4 inch diameter head with solid brass construction, polished chrome finish, and 7/8 inch projection, giving installers a defined set of dimensions and a consistent feel across every cabinet. With a 3/4 inch base diameter and 8-32 x 1 inch screw specification, the knob aligns well with standard cabinet drilling and fastening practices. For projects that call for polished chrome decorative hardware with a traditional profile, this 703-26 knob provides a clear, repeatable choice for doors and drawers throughout the job.