Schaub Traditional Series Flat Black Knob Use

Schaub Traditional Series flat black knob describes a solid brass cabinet knob from Schaub and Company designed for decorative hardware work. The 1-1/4 inch (32 mm) diameter head gives a comfortable gripping area, which helps when opening heavier cabinet doors or wider drawers in a shop, kitchen, or built-in installation. The knob uses a flat black finish, which visually ties in with other flat black decorative hardware in a run, supporting clean layout lines across multiple fronts. With a projection of 7/8 inch, the knob stands off the face enough for a full finger pull while keeping fronts from snagging in tight walkways or between opposing doors. A 3/4 inch base diameter steps the knob cleanly down to the door or drawer surface, giving a transition that looks intentional when aligned with stiles, rails, or face-frame members.

Key Flat Black Knob Details For Projects

• The solid brass material creates a dense feel at the hand, which supports a substantial pull experience on frequently used cabinet doors and drawers.
• The flat black finish delivers a consistent dark appearance, which helps match other flat black decorative hardware on the same project for a unified look.
• The 1-1/4 inch diameter head defines the overall footprint, which provides a clear target when reaching for small drawer fronts or narrow doors.
• The 7/8 inch projection sets the stand-off from the surface, which balances clearance for fingers with a compact profile in tighter cabinet runs.
• The 3/4 inch base diameter creates a smaller contact circle at the mounting surface, which frames the knob visually without overwhelming narrow rails.
• The 8-32 thread specification on the screw size defines the internal thread of the knob, which aligns with common cabinet drilling and tap standards.

Flat Black Knob Dimensions For Clean Installation

The Schaub and Company 703-FB knob uses a 1-1/4 inch diameter head, which helps lay out consistent centerlines across multiple doors because the installer can reference the same edge offsets from a known size. The 3/4 inch base diameter keeps the footprint smaller than the head, which lets the knob sit neatly on narrow stiles without crowding decorative profiles or edge details. With a 7/8 inch projection, the knob extends just under an inch from the surface, which supports a full finger grip while limiting interference with adjacent doors in tight reveals. The 8-32 thread size gives a standard machine-screw interface, which integrates smoothly with typical cabinet drilling patterns and hardware jigs used in production or retrofit work.

Where This Schaub Flat Black Knob Fits Best

Using The 1-1/4 Inch Knob On Cabinets

The Schaub Traditional Designs Series 703-FB knob, at 1-1/4 inch diameter, suits cabinet and drawer fronts that benefit from a moderate-size pull point, giving enough surface for fingers without visually dominating smaller fronts. Its flat black finish aligns with flat black decorative hardware schemes, which helps keep hardware details consistent across kitchens, baths, and built-ins using similar finishes. The 3/4 inch base diameter allows mounting on narrow face-frame members or slim drawer rails, where a larger base might crowd adjacent edges. Solid brass construction supports use in higher-touch locations like kitchen cabinets or shop storage, where a metal knob with noticeable mass pairs well with regular daily operation.

Details That Support Repeatable Knob Layout

The defined 1-1/4 inch diameter of the 703-FB knob simplifies jig setup for repetitive drilling, because installers can standardize edge clearances knowing the head size will remain the same across all fronts. The 7/8 inch projection controls how far the knob extends from the surface, which aids in planning clearances where doors open past each other or near adjacent appliances. The 3/4 inch base diameter gives a predictable bearing surface around the mounting point, which helps align the knob visually with panel profiles and trim reveals. The flat black finish provides a stable color target when coordinating with hinges or pulls in the same Traditional Series, simplifying hardware selection on multi-room projects. The solid brass material supports a robust feel at every touchpoint, which helps the hardware feel substantial when matched with heavier doors or thicker decorative fronts.

Common Questions About The 703-FB Flat Black Knob

Select This Knob For Flat Black Brass Projects

The Schaub and Company Traditional Designs Series 703-FB knob combines solid brass construction, a flat black finish, and a 1-1/4 inch diameter head, giving a defined pull point suited to cabinet doors and drawers that need consistent hardware sizing. The 3/4 inch base diameter and 7/8 inch projection provide known layout dimensions, supporting predictable results when planning hardware locations across a run of fronts. For projects using flat black decorative hardware, this knob aligns finish and form with other Schaub Traditional Series components, simplifying selection when standardizing on a specific size and material.