Hickory Hardware Modus Matte Black 5/8" (16 mm) Diameter Knob, P2816-MB

Hickory Hardware Modus Matte Black Knob Details

Hickory Hardware Modus matte black knob identifies this as a Modus Series knob in a matte black finish from Belwith Keeler, so it visually matches other Modus pieces in a project. The SAP description "ROUND KNOB, MATTE BLACK" confirms you are working with a simple round profile in a dark, low-sheen color that suits many cabinet styles. The 5/8 inch (16 mm) diameter head keeps the knob compact, which helps on smaller cabinet doors or narrow drawer fronts. The 1/2 inch projection sets how far it stands off the surface, giving enough finger clearance while keeping the pull point close to the face for a tight, clean look. The 3/8 inch base diameter defines the footprint against the door or drawer, which matters when covering previous knob marks or laying out new drilling patterns.

Key Modus Knob Features For Cabinet Work

• The Modus Series designation ties this knob to the Modus collection, which helps maintain a consistent style when you are coordinating hardware across multiple doors and drawers in the same room or run.
• The 5/8 inch (16 mm) diameter head sets a small, precise grip point, which is useful when spacing knobs on narrow rails or when you want hardware that does not dominate tight cabinet layouts.
• The 1/2 inch projection defines how far the knob stands off the surface, providing functional clearance for fingers while keeping the pull point close to the cabinet face for a neat, compact profile.
• The 3/8 inch base diameter describes the contact area on the door or drawer, which helps when planning hole placement relative to panel edges or existing finish details around the mounting point.
• The matte black finish gives a uniform dark tone, which matters when you want hardware that visually recedes or contrasts predictably against painted or stained cabinet surfaces.
• The Belwith Keeler manufacturer name and P2816-MB part number identify the exact knob, which supports accurate reordering on future phases or matching existing installs in the field.

Mounting Dimensions And Layout For This Knob

The stated 5/8 inch diameter gives you the size of the round pulling surface, so you can place knobs on narrow stiles without crowding panel edges. The 1/2 inch projection defines stand-off from the cabinet face, helping you judge whether adjacent doors or drawers will contact the knob when opened. The 3/8 inch base diameter tells you how large the footprint is on the face, which is useful when you are laying out drilling relative to bevels, profiles, or edge reveals. The web description lists screw size as 8-32 x 1 inch, which matches a common cabinet knob thread, simplifying field prep when you are drilling and tapping through standard cabinet door thicknesses.

Using This Modus Round Knob On Cabinets

Where This 5/8 Inch Matte Black Knob Fits

The product name "Hickory Hardware Modus Series Matte Black 5/8 inch (16 mm) Diameter Knob" defines this as a compact Modus Series part suited to cabinet applications where space is limited and a small knob is preferred. The category listing under Decorative Hardware & Moldings and Knobs places it in the cabinet and furniture hardware group, so it is aligned with door and drawer use rather than structural fasteners. The 5/8 inch diameter and 1/2 inch projection combination creates a modest pull point, which works well on face-frame cabinets, frameless fronts, or utility cabinets where a low-profile grip is desired. The matte black finish specified in the web description provides a neutral dark look, allowing the knob to support many finish schemes, from light painted doors to darker stained fronts, without drawing too much attention to the hardware itself.

Details That Support Repeatable Cabinet Installations

The manufacturer part number P2816-MB and the SAP description ROUND KNOB, MATTE BLACK give you precise identification, which helps maintain consistency when ordering multiple batches for larger jobs or matching existing installations later. The material callout as zinc die cast in the web description defines the construction method, providing a molded metal body that keeps dimensions like the 5/8 inch diameter and 1/2 inch projection consistent from piece to piece across an order. The specified screw size of 8-32 x 1 inch aligns with a common cabinet knob thread length, which supports standard through-bore drilling patterns on many cabinet doors and drawer fronts. The 3/8 inch base diameter offers a defined contact ring against the surface, supporting predictable layout when using jigs or templates that reference the knob base to edges, rails, or stile centerlines.

Common Questions About The P2816-MB Modus Knob

Selecting This Modus Knob For Your Next Job

The Belwith Keeler P2816-MB Modus Series round knob combines a 5/8 inch diameter head, 1/2 inch projection, and 3/8 inch base diameter in a matte black finish, giving clear size and appearance data for cabinet layouts. The zinc die cast construction and 8-32 x 1 inch screw size listed in the web description define its basic construction and thread standard, supporting predictable drilling patterns on doors and drawers. When a project calls for a compact, matte black round knob that aligns with the Modus collection, these specifics provide a straightforward basis for selecting this part through Wurth Baer Supply.