Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Grass Nexis 170 degree hinges are designed as concealed cabinet hinges for face-frame installations where wide opening is required, so doors can clear adjacent surfaces in tight runs. These hinges are commonly used in corner or lazy susan applications along with a pie cut hinge, which lets corner doors swing out for better interior access. The hinges provide zero protrusion when opened at 90 degrees, so the door does not project into the cabinet opening at that angle and maintains an excellent minimum gap and reveal. As concealed European standard hinges, they keep hardware hidden while providing the motion and clearances needed for modern cabinet layouts. The self-close function draws the door shut at the end of travel, which helps doors return to a consistent closed position in everyday use.
The Nexis Impresso toolless hinge design uses a die-cast steel cup and closing flap with all metal construction for positive and secure attachment to the cabinet door, so the cup engages the door without separate screw fastening in this version. The hinge offers a cup depth of 11 mm, which suits standard European-style boring setups where that depth is required for proper seating. A hinge cup edge drilling distance of 3 mm to 10 mm gives flexibility in how far the cup is set from the door edge, supporting different overlay and gap preferences. Boring patterns of 42 mm and 45 mm match common European hinge drilling jigs, which helps align new installations or replacements with existing patterns on many shop layouts.
This Grass Nexis 170 degree hinge is described as a half overlay face-frame hinge, which means it is intended for applications where the door overlays part of the face-frame reveal instead of covering it fully. That half overlay behavior fits well in corner runs, where two doors share a face-frame opening and must balance overlay and gap. Because the hinges are commonly used in corner or lazy susan applications along with a pie cut hinge, they support door sets that articulate across angled openings. Zero protrusion when opened at 90 degrees is especially useful next to adjacent doors or appliances, since the open door stays clear of the interior opening at that angle. When used with a restrictive clip for special applications such as lipped doors and mitered corners, the hinge motion can be adapted to those specific door edge conditions.
The three-dimensional adjustment capability on these Nexis 170 degree hinges covers side, depth, and height, giving installers the ability to dial in door fit after the casework is fixed. Single screw side-to-side adjustment of plus 1 mm to minus 3 mm provides a defined horizontal shift range, which helps balance reveals between neighboring doors on long runs or corner sets. The cup depth of 11 mm and hinge cup edge drilling distance of 3 mm to 10 mm establish the key drilling geometry, so once those dimensions are used, adjustment focuses on fine tuning instead of re-boring. Boring patterns of 42 mm and 45 mm align with common shop drilling equipment, which helps maintain repeatability from cabinet to cabinet. The die-cast steel cup and closing flap with all metal construction on the Impresso version create a rigid interface with the door, which supports stable adjustment over time. The self-close action then brings the door back to the same closed position repeatedly, which preserves the reveals established during setup.
The Grass Nexis 170 degree hinge is a concealed cabinet hinge in the European standard hinge class, so it mounts inside the cabinet while keeping hardware hidden from the front view.
Grass Nexis 170 degree hinges have a 170 degree opening angle, which lets the door swing very wide for access, especially useful on corner or lazy susan cabinet layouts.
Grass Nexis 170 degree hinges are commonly used in corner or lazy susan applications along with a pie cut hinge, enabling doors to articulate across angled openings for better interior reach.
The three-dimensional adjustment on Nexis hinges lets you fine-tune side, depth, and height, so door position can be aligned after installation for clean, consistent reveals.
This Nexis hinge uses an 11 mm cup depth, hinge cup edge drilling distance of 3 mm to 10 mm, and boring patterns of 42 mm and 45 mm for standard European-style boring.
The Nexis Impresso toolless hinge uses a die-cast steel cup and closing flap with all metal construction for positive, secure attachment to the door without separate screw fastening in this version.
The Grass Nexis Impresso self-close half overlay face-frame hinge in nickel brings together a 170 degree opening angle, three-dimensional adjustment, and a die-cast steel Impresso cup, so wide-opening corner doors can be aligned precisely. With zero protrusion at 90 degrees, defined cup depth, and 42 mm or 45 mm boring patterns, this concealed hinge suits European-style drilling workflows on face-frame cabinets. For projects calling for corner or lazy susan functionality along with a pie cut hinge, this Nexis 170 degree model provides the movement and adjustability needed to set gaps and reveals accurately across the run.
Sold In: 1 Each