Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Nexis two piece frameless base plate is a Grass America hinge mounting plate designed for frameless cabinet construction, so it provides the connection point between the cabinet side and a compatible Nexis hinge for reliable door mounting. The plate has a height of 18mm, which sets the hinge position off the cabinet side and helps establish consistent overlay and reveal relationships across a run of doors. This part is classified as a hinge mounting plate, so it is intended to work as the fixed reference surface in the hinge system, giving installers a stable base for adjustments at the hinge arm. The base plate is described as slotted hole-open hole for Euro screws, providing specific hole geometry for Euro screw fastening patterns that are common in frameless cabinetry. Grass Nexis base plates are constructed of high grade die-cast steel, giving the installer a rigid mounting surface that resists deformation during normal cabinet door operation.
This Grass Nexis base plate affixes to the hinge via a clip-on design, so the hinge arm engages the plate without separate fastening steps at that interface, which can streamline hanging and removal of doors. The cabinet side fixing style is described as three point, meaning the plate uses three cabinet side connection points, giving the installer a stable triangular mounting pattern on the panel. All base plates in this Nexis family have plus or minus 2 mm of height adjustment, so the mounted hinge position can be shifted vertically within that range to fine-tune the door reveal relative to adjacent fronts. This combination of three point cabinet side fixing and clip-on hinge attachment creates a defined mounting workflow, with the base plate acting as the foundational part for positioning.
This Nexis hinge mounting plate is intended for frameless cabinet applications, so it mounts directly to the cabinet side rather than a face frame and sets the hinge location from that panel. The product is listed in the hinge mounting plates class, indicating its role as part of a multi-piece hinge system rather than a standalone hinge. Because it is a Grass Nexis base plate, it is suited to installations where Grass America Nexis hinges are used and a matching base plate geometry is required on the case. The 18mm height of the plate defines the distance between the cabinet side and the hinge arm, which influences overlay and panel alignment when doors are positioned across a cabinet bank. With a cabinet side fixing style of three point, the plate contacts the side at three fastener locations, spreading load over the panel surface during normal door operation.
The clip-on design between this Grass Nexis base plate and the hinge allows the hinge arm to connect to the plate mechanically, which can simplify repeatedly removing and rehanging doors during fitting or service. The slotted hole-open hole configuration for Euro screws provides a mix of fixed and elongated fastening points, supporting fine positioning within the plus or minus 2 mm of height adjustment designed into all base plates in this Nexis group. That plus or minus 2 mm range allows the installer to shift the mounted hinge slightly up or down after the plate is secured, helping align doors to adjacent fronts and cabinet tops without remounting holes. High grade die-cast steel construction gives the plate structural stiffness, so the adjustment range can be used without the mounting surface distorting. As a hinge mounting plate within the hinges and hinge base plates category, this part functions as the consistent reference element in the Nexis hinge assembly, helping repeat hinge placement from cabinet to cabinet.
The Nexis two piece frameless base plate is a hinge mounting plate from Grass America, so it serves as the fixed cabinet-side component in a Nexis hinge system for frameless cabinets.
The 18mm height sets the hinge arm off the cabinet side, influencing overlay and gap relationships so doors align consistently across frameless cabinet runs.
This Grass Nexis base plate uses a clip-on design to affix to the hinge arm, so the arm snaps onto the plate for mounting and removal during door fitting.
The Nexis hinge mounting plate uses a three point cabinet side fixing style, creating a stable mounting triangle on the panel for everyday door use.
All base plates in this Nexis group have plus or minus 2 mm of height adjustment, allowing small vertical shifts to refine door reveals after mounting.
The slotted hole-open hole layout is designed for Euro screws, providing hole geometry that aligns with Euro screw fastening patterns on frameless cabinet sides.
This Grass Nexis base plate from Wurth Baer Supply combines a two piece frameless design, 18mm height, and clip-on hinge connection, so it fits cabinet projects that use Nexis hinges on frameless cases. The three point cabinet side fixing style and plus or minus 2 mm of height adjustment support precise door alignment when setting reveals. For hinge layouts that depend on Euro screw patterns and die-cast steel strength at the mounting point, this Nexis hinge mounting plate offers a defined geometry and material suited to those cabinet-side conditions.
Sold In: 1 Each
