Euro Rustica Cup Pull For Cabinet Projects

Euro Rustica cup pull 64mm center to center gives cabinets a handled look that matches traditional and rustic jobs. This Berenson Corporation cup pull uses a 2-1/2 inch center to center layout, so it aligns with common drilling patterns on many cabinet fronts. The rustic nickel finish delivers a weathered metal appearance that fits jobs calling for a worn-in, metal-forward style. A zinc die cast material build forms the body of the pull and creates a solid part that feels substantial in hand. The cup pull design provides a recessed grip area, so fingers hook behind the front edge instead of pinching a small tab. This shape works well on drawers where users want a full-hand pull point instead of a small knob. With a width of 1-3/8 inch, the pull covers a modest band of the drawer face, helping visually frame the hardware location.

Key Details Of This Rustic Nickel Cup Pull

• The Euro Rustica collection identity ties this pull to a defined Berenson Corporation design family, which helps keep cabinetry looking consistent when multiple pulls are used across a room.
• A 2-1/2 inch (64 mm) center to center dimension sets the hole spacing, which simplifies layout on new fronts or matching to existing 64 mm drill patterns during change-outs.
• The rustic nickel finish establishes a muted, textured metal look, which helps this pull blend with other rustic nickel decorative hardware and keeps glare down on finished cabinet faces.
• Zinc die cast construction forms the core of the pull, which produces a uniform part shape that matches from piece to piece across large runs of doors and drawers.
• A 1 inch projection sets how far the pull stands off the cabinet surface, which affects finger clearance behind the cup and the feel when gripping drawers or doors.
• A width of 1-3/8 inch defines the front face coverage, which matters when lining up multiple pulls on a bank of drawers so visual spacing stays balanced.

Mounting Layout And Cup Pull Dimensions

This Berenson Euro Rustica cup pull uses a 2-1/2 inch (64 mm) center to center mounting dimension, which establishes the horizontal distance between the two mounting points on the cabinet face. That spacing works with drilling jigs or templates designed for 64 mm center to center hardware, which helps keep rows of pulls straight. The 1 inch projection sets the stand-off from the door or drawer front, so hands have room to pull without rubbing the surface. A 1-3/8 inch width defines the overall front band of the pull, which guides how it lines up with rail heights or drawer top edges in a run of cabinetry.

How The Euro Rustica Cup Pull Works In Use

Cabinet And Drawer Applications For This Pull

This Euro Rustica 2-1/2 inch cabinet cup pull fits projects where a recessed grip works better than a protruding handle, such as on kitchen or bath drawers that see frequent use. The cup pull form gives fingers a defined pocket to grab, which can feel more secure on heavier drawer boxes than a small round knob. With a 64 mm center to center layout, the pull pairs with layouts based on metric spacing, which is common on many modern cabinet lines and jig systems. The rustic nickel finish from the Berenson Euro Rustica collection ties in with other rustic nickel decorative hardware and moldings, which helps unify a room when mixing knobs and pulls from the same series. Because the material is zinc die cast, each pull maintains consistent lines and curves, which keeps multiple fronts looking aligned when installed across an entire run of cabinetry.

Details That Support Consistent Alignment And Feel

The 2-1/2 inch (64 mm) center to center mounting dimension on this 2973-1RN-C Euro Rustica cup pull controls screw spacing, which helps installers maintain even hardware placement from door to door. A 1 inch projection defines how far the cup stands off the face, which influences both knuckle clearance behind the lip and how far the hardware extends into the working space around cabinets. With a 1-3/8 inch width, the pull occupies a compact footprint on the rail, which gives flexibility when positioning it on narrow drawer fronts or face frames. The rustic nickel finish keeps the surface visually subdued compared to bright, reflective finishes, which can matter on large banks of drawers where hardware becomes a noticeable design element. Zinc die cast construction supports a uniform finish application and edge definition, which helps each pull feel alike when users move along a row of doors and drawers.

Common Questions About This Euro Rustica Pull

Selecting This Pull For Your Next Cabinet Run

The Berenson Euro Rustica cup pull 64mm center to center in rustic nickel combines a defined 2-1/2 inch mounting layout with a zinc die cast body and 1 inch projection, so it suits cabinet runs where consistent spacing, a recessed grip, and a muted metal finish are priorities. For projects calling for Euro Rustica styling and 64 mm center to center drilling, this 2973-1RN-C cup pull provides a centered, repeatable hardware choice across doors and drawers.