Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Berenson Rhapsody weathered iron knob is a zinc die cast cabinet knob designed for decorative hardware installations where a 2-1/2 inch length is needed across the hand grip, giving you a comfortable pull point on cabinet doors and drawers. The Rhapsody collection identity ties this knob into coordinated Berenson decorative hardware lines, helping maintain a consistent look across a run of cabinetry. The weathered iron finish provides a dark, aged metal appearance that visually suits traditional and rustic projects, so face frames and doors read as one finished design. The knob width of 1/2 inch concentrates the grip area into a narrow profile, which helps on smaller drawer fronts where space between pieces can be tight. A projection of 1-1/8 inch sets the knob comfortably off the surface, creating hand clearance without pulling the hardware too far into the room.
This Berenson Rhapsody knob is specified with an 8-32 x 1 inch screw size, so the mounting hole can be drilled to suit standard 8-32 machine screw threading through typical cabinet door and drawer thicknesses. The 3/8 inch base diameter defines the bearing surface against the wood, helping place the knob fully on flat rail or stile sections for a clean seat. With a 1-1/8 inch projection, the knob sits far enough off the cabinet face to grasp comfortably once mounted, which supports smooth operation when opening heavier doors. The 2-1/2 inch overall length and 1/2 inch width guide layout marks during installation, keeping knob centers visually aligned across multiple fronts in a kitchen or casework run.
This Berenson Rhapsody Series weathered iron knob fits decorative hardware and moldings applications where a knob from the Berenson knobs product class is specified, allowing it to sit naturally among other Berenson Corporation components. The weathered iron finish supports applications that call for an aged metal look on cabinet faces, so the hardware complements stained or painted wood tones without a high-gloss contrast. In shops that build face-frame or frameless cabinets, the 2-1/2 inch length and 1/2 inch width sit comfortably on both narrow and wider fronts, helping maintain proportional hardware sizing from base cabinets to uppers. The stated 64 mm length dimension also lets metric-based shops position this knob accurately on drawings and jigs when building casework with millimeter-based measurements. In decorative hardware layouts, the 3/8 inch base diameter keeps the footprint compact, which is useful when knobs must land within slim rails or narrow stile widths.
The zinc die cast material on this Rhapsody knob provides a uniform casting, which supports consistent appearance when multiple knobs are installed across long cabinet runs. The 1-1/8 inch projection helps keep hands away from the cabinet face during operation, reducing finger contact with finished wood surfaces while opening doors and drawers. Because the knob uses an 8-32 x 1 inch screw size, shop personnel can standardize drilling and threading across fronts that will receive this part, simplifying fabrication and installation workflows. The 2-1/2 inch length establishes a clear visual anchor point on each door or drawer, which assists in aligning the hardware visually with surrounding design elements like rails, stiles, and adjacent decorative hardware. The narrow 1/2 inch width also keeps the knob from overpowering small drawer fronts, which supports balanced proportions in built-ins, vanities, and kitchen cabinets using the same Berenson Rhapsody Series profile.
The Berenson Rhapsody weathered iron knob is made from zinc die cast, giving it a consistent cast form that supports uniform appearance across multiple installed knobs.
The Rhapsody knob has a 2-1/2 inch length, 1/2 inch width, and 1-1/8 inch projection, so it presents a slim profile while standing off enough for a workable hand grip.
The Berenson 3047-1LWI-P knob has a base diameter of 3/8 inch, which defines the contact circle on the cabinet face and helps it sit neatly on narrow rails.
The 2-1/2 inch weathered iron knob is specified with an 8-32 x 1 inch screw size, aligning with common cabinet drilling patterns for machine screw-mounted knobs.
This Rhapsody Series knob has a weathered iron finish, giving cabinets a dark, aged metal look that pairs well with traditional and rustic design schemes.
The zinc die cast knob projects 1-1/8 inch from the cabinet face, providing hand clearance while keeping the hardware relatively low profile on doors and drawers.
The Berenson Rhapsody Series weathered iron knob combines zinc die cast construction, a 2-1/2 inch length, and a 1-1/8 inch projection to support functional, consistent cabinet hardware layouts. With its 3/8 inch base diameter and 1/2 inch width, this knob suits narrow rails, standard doors, and drawers while keeping proportions balanced. The weathered iron finish ties into decorative hardware and moldings applications where an aged metal look is specified. For cabinet, casework, or millwork projects that call for a coordinated Berenson knobs solution, this 3047-1LWI-P part number offers a defined set of dimensions and finish characteristics for repeatable installations.
Sold In: 1 Each
