Berenson Rhapsody Series Weathered Nickel 1-5/16" (33 mm) Diameter Knob, - 3054-1WN-P
Description
Rhapsody Knob 1-5/16 Inch Diameter For Cabinets
Rhapsody knob 1-5/16 inch diameter identifies this Berenson Corporation cabinet knob as a 1-5/16 inch diameter pull designed for doors or drawers, so installers get a predictable hand grip size that works across typical kitchen, bath, or built-in layouts. The knob is part of the Berenson Rhapsody Series, which groups it with other coordinating decorative hardware from the same line for visually consistent projects. Its material is zinc die cast, so the knob body is formed from a stable cast zinc alloy that supports repeatable machining and uniform threaded engagement. The finish is Weathered Nickel, giving the face and sides of the knob a muted nickel appearance that suits jobs aiming for a softer metal tone rather than a bright chrome look. A projection of 1 inch sets how far the knob stands off the cabinet face, establishing knuckle clearance and reach in day-to-day use.
Key Berenson Rhapsody Knob Details For Projects
- The 1-5/16 inch length or diameter defines the main gripping surface, so layouts using multiple knobs can keep center-to-edge spacing visually balanced on doors and drawers.
- A base diameter of 3/8 inch sets the footprint at the cabinet face, which helps installers understand how much flat surface is covered around the drilled hole.
- The 1 inch projection describes the distance from the cabinet surface to the front of the knob, affecting finger clearance and how comfortably hands can pull from different angles.
- The zinc die cast material gives the knob a consistent mass and threading interface, supporting repeatable fastening into the cabinet front during installation.
- The Weathered Nickel finish defines the visible color tone, so designers and installers can match this knob to hinges or other decorative hardware with a similar nickel shade.
Cabinet Knob Fit, Sizing, And Hole Interface
This Berenson Rhapsody Series knob uses a diameter of 1-5/16 inch, which sets the face size relative to standard cabinet rail and stile widths and helps determine how it will look on narrow or wide frames. The knob width is also 1-5/16 inch, indicating a round profile where width and diameter align, so the knob presents a uniform circular shape from multiple viewing angles. A 3/8 inch base diameter defines the contact area around the mounting hole, which covers a compact circle on the cabinet face to keep the knob visually light. The projection of 1 inch locates the gripping edge away from the door or drawer surface, so users can pull without rubbing fingers against finished wood or laminate. The screw size is 8-32 x 1 inch, giving a standard machine screw thread commonly used in cabinet doors and drawer fronts, which supports straightforward mounting into a properly drilled hole.
Using This Berenson Decorative Knob In Workflows
Where This Rhapsody Cabinet Knob Performs Best
This Berenson Corporation Rhapsody Series knob is classified under Decorative Hardware & Moldings in the Knobs category, so it is positioned for use on cabinet doors and drawers in woodworking projects. The 1-5/16 inch diameter and matching width suit many residential cabinet faces, giving enough visual presence without dominating narrow rails. Its Weathered Nickel finish lets the knob sit comfortably in projects targeting a softer metal look, fitting designs that favor subtle metallic tones. The zinc die cast construction supports uniform knob shapes across multiple units, so large projects can maintain a consistent appearance from one door or drawer to the next. With a base diameter of 3/8 inch, the knob seats on a focused area of the door or drawer front, which aligns well with narrow stile sections and modern, clean-lined cabinet faces.
Details That Support Consistent Mounting Results
The 8-32 x 1 inch screw size gives this knob a standard threaded connection commonly used in cabinetry, so drilling for the knob can follow established bit sizes for that thread. A projection of 1 inch controls how far the gripping point stands away from the cabinet, supporting predictable clearance for fingers during repeated use. The 1-5/16 inch diameter links directly to finger contact area, which helps maintain a comfortable pull point when installing multiple knobs along a run of doors or drawer banks. Because the base diameter is 3/8 inch, the knob covers only a small ring around the bore, allowing precise alignment relative to cabinet edges without masking large areas of the surface. The zinc die cast material interacts reliably with the threaded screw, supporting firm engagement and steady seating tension against wood or composite cabinet fronts.
Common Questions About The Rhapsody Zinc Knob
What are the main dimensions of this Berenson Rhapsody knob?
The knob has a 1-5/16 inch length or diameter, a 1-5/16 inch width, a 3/8 inch base diameter, and a 1 inch projection, so installers can plan clearances and visual scale on cabinet fronts.
What material is the 3054-1WN-P cabinet knob made from?
The 3054-1WN-P knob is zinc die cast, providing a cast zinc body that supports consistent shaping, durable threading, and a solid feel when mounted on doors or drawers.
How does the Weathered Nickel finish affect project appearance?
The Weathered Nickel finish gives the knob a muted nickel tone, helping it coordinate with similar nickel decorative hardware in projects seeking a softer, less reflective metal look.
What screw size does this zinc die cast cabinet knob use?
This zinc die cast cabinet knob uses an 8-32 x 1 inch screw size, so it works with common cabinet door and drawer drilling practices using that machine screw thread.
How far does the Berenson decorative cabinet knob project from the door?
The Berenson decorative cabinet knob projects 1 inch from the cabinet surface, providing defined finger clearance between the knob and the door or drawer front.
What does the 1-5/16 inch width mean for cabinet layouts?
The 1-5/16 inch width means the knob face spans that distance, helping installers size it appropriately on narrow frames, wide drawers, or symmetric door layouts.
Select This Rhapsody Knob For Sized Nickel Projects
The Berenson Rhapsody Series Weathered Nickel knob with a 1-5/16 inch diameter, 3/8 inch base, and 1 inch projection offers defined dimensions for cabinet layouts that favor predictable sizing. Its zinc die cast construction and 8-32 x 1 inch screw interface support consistent mounting on doors or drawers. The Weathered Nickel finish aligns this knob with projects calling for a subdued nickel tone within decorative hardware schemes. When a cabinet job benefits from a round 1-5/16 inch pull with a compact base and standard screw thread, this Berenson Corporation Rhapsody knob provides the specified measurements for planning and execution.