Berenson Zurich Series 8-13/16" (224 mm) Center to Center Gold Recessed Pull, - 6691-107-B
Description
Berenson Zurich Recessed Pull For Clean Lines
Berenson Zurich Series recessed pull gives you an 8-13/16 inch long gold handle that sits into the surface for a streamlined look on cabinets or furniture fronts. The zinc die cast material forms a solid pull body that handles everyday use while keeping weight reasonable on doors or drawers. The 224 mm center to center layout sets consistent mounting hole spacing, which supports straight, repeatable alignment across a run of fronts. The 4-1/2 inch length noted in the description defines a key dimension of the pull body, which matters when planning cutouts or recess routing. A gold finish covers the zinc die cast pull, creating a unified appearance when matching other gold decorative hardware in the same space. The Zurich Series collection designation ties this pull to other pieces in the Zurich family when a coordinated hardware layout is required.
Key Zurich Recessed Pull Details In Practice
- The 224 mm center to center dimension sets the distance between mounting points, which helps installers drill or route consistent holes when repeating this pull across multiple doors or drawers in a project.
- The zinc die cast material forms the pull body from a single casting, which supports a solid feel in use while keeping machining predictable when recessing the pull into wood or composite fronts.
- The gold finish ties this recessed pull visually to other gold decorative hardware, which helps designers and installers maintain a coherent finish scheme across cabinets, furniture, and surrounding trim.
- The overall length described as 4-1/2 inches provides a fixed reference for layout, which matters when locating the recess relative to panel edges and neighboring hardware or design features.
- The Zurich Series collection name identifies this pull as part of a broader Berenson family, which supports consistent styling when specifying handles and pulls across different cabinet zones.
Recessed Pull Fit, Projection, And Layout
The listed projection of 1/8 inch keeps the Zurich recessed pull close to the panel face, which helps reduce snag points while still presenting an edge to grip during everyday operation. A width of 1-11/16 inches defines the cross-body dimension, giving fabricators a clear width target when routing or machining the recess pocket. The 224 mm center to center spacing positions mounting points along the length, which supports predictable screw placement during installation. The overall described length of 4-1/2 inches provides another layout reference when aligning this pull with adjacent design elements on doors or drawer fronts. Together, these dimensions guide installers in planning precise cutouts and mounting locations so the pull sits square and even across a bank of cabinetry.
Using This Zurich Recessed Pull On Projects
Where The Zurich Series Pull Fits Best
The Zurich Series recessed pull configuration suits cabinet and furniture fronts where a low-profile grip is preferred. The 8-13/16 inch overall length helps the pull visually span wider fronts, supporting a balanced look on larger cabinet doors. With a 1-11/16 inch width, the pull occupies a modest vertical band, which can work well on modern slab doors or flat drawer fronts without crowding panel edges. The 224 mm center to center spacing aligns with a metric-based layout, which is helpful on projects designed around European cabinet systems or drill patterns. The gold finish coordinates with other gold decorative hardware, making this pull appropriate in spaces where a consistent finish theme runs through hinges, knobs, and additional pulls.
Details That Support Consistent Installation Results
The zinc die cast construction provides a defined, repeatable shape from pull to pull, which supports uniform recess routing when multiple handles are installed in a straight line. The shallow 1/8 inch projection keeps the exposed edge minimal, which can simplify alignment with flush cabinet fronts while still giving users a tactile grip point. The 4-1/2 inch length reference in the description, combined with the 224 mm center to center spacing, gives installers concrete numbers for jigs, templates, or CNC programs, supporting consistent hole and recess positioning. The 1-11/16 inch width dimension allows fabricators to size a recess pocket that closely matches the pull profile, helping the pull seat snugly in the opening without excessive gaps at the edges. The Zurich Series naming and manufacturer part number 6691-107-B give specifiers precise identification when repeating this pull on replacement jobs or extending an existing installation.
Common Questions About The Zurich Recessed Pull
What are the key dimensions of this Zurich recessed pull?
The Berenson Zurich Series recessed pull is described as 8-13/16 inches long with a 224 mm center to center, a 4-1/2 inch length reference, 1/8 inch projection, and 1-11/16 inch width, guiding layout and recess sizing.
How does the 224 mm center to center help installation?
The 224 mm center to center spacing defines the distance between mounting points, helping installers drill or program consistent holes when repeating this pull across cabinet runs or replacement fronts.
What material is the Berenson Zurich Series recessed pull made from?
The Berenson Zurich Series recessed pull uses zinc die cast material, which provides a solid, cast body that supports everyday operation while giving manufacturers a consistent shape for routing and machining.
How does the 1/8 inch projection affect cabinet fronts?
The 1/8 inch projection keeps the pull close to the cabinet surface, limiting how far it stands proud while still presenting an edge to grip, which suits streamlined, low-profile designs.
What role does the gold finish play in a project?
The gold finish on this Zurich Series recessed pull aligns with other gold decorative hardware, helping designers and installers maintain a unified finish scheme across cabinets and related millwork.
How does the 1-11/16 inch width influence recess layout?
The 1-11/16 inch width provides a clear cross-body dimension, guiding routing or machining of the recess pocket so the pull sits neatly without excessive side gaps.
Selecting This Zurich Recessed Pull For Your Job
The Berenson Zurich Series recessed pull in gold combines a zinc die cast body with defined dimensions, giving installers and fabricators concrete numbers for routing, drilling, and layout. The 224 mm center to center spacing, 1-11/16 inch width, 1/8 inch projection, and 8-13/16 inch overall length support consistent placement across doors and drawers. The gold finish and Zurich Series styling tie this pull to other coordinated hardware choices. For projects calling for a low-profile, recessed cabinet or furniture pull with these specific measurements, this Berenson model 6691-107-B offers a clearly defined option.