Stainless Steel Pull 448mm Center To Center Use

Stainless steel pull 448mm center to center describes a Berenson Stainless Steel Series handle built from stainless steel in a stainless steel finish, so the pull delivers a consistent metal look across cabinets or casework. The 17-5/8 inch (448 mm) center-to-center drilling matches common long-handle layouts, which helps align with existing boring patterns on doors or drawers. Overall length of 19-9/16 inch gives generous hand clearance along wider fronts, supporting comfortable operation on tall pantry doors or large drawers. A projection of 1-1/4 inch keeps the pull standing off the surface enough for a solid grip while keeping the handle closer to the face for a clean, linear appearance. The pull sits on 1/2 inch diameter bases and has a 1/2 inch width, creating a balanced footprint where load transfers from the handle into the door or drawer front.

Key Stainless Steel Pull Details For Projects

• The Stainless Steel Series material is stainless steel, so the pull body matches stainless hardware setups and provides a solid metal feel when opening doors or drawers on cabinetry projects.
• The stainless steel finish matches the base material, giving a uniform brushed metal appearance that coordinates with other stainless components across a kitchen, bath, or commercial installation.
• The 17-5/8 inch (448 mm) center to center dimension fits long-handle drilling patterns, which helps align with standard boring jigs and keeps hole placement consistent from cabinet to cabinet.
• The 19-9/16 inch length allows the pull to span wider drawer fronts or tall doors, giving users more gripping area along the handle whenever hands approach from different heights or positions.
• The 1-1/4 inch projection sets the handle far enough off the surface for fingers to wrap behind, while the 1/2 inch width keeps the profile slim for a streamlined, modern hardware layout.
• The 1/2 inch base diameter defines a compact contact point at each mounting location, which concentrates the load into a small, neat footprint on the door or drawer face.

Stainless Steel Pull Sizing For Mounting And Fit

This Berenson Corporation pull uses a 17-5/8 inch (448 mm) center to center measurement, so drilling and layout are driven by that fixed spacing across the door or drawer front. The overall 19-9/16 inch length means the handle will extend slightly beyond the mounting holes on both sides, framing the hardware visually while keeping the fasteners within the footprint of the bases. A projection of 1-1/4 inch gives space between the cabinet surface and the bar, so fingers can hook behind the pull without contacting the door or drawer face. The 1/2 inch width and 1/2 inch base diameter create a narrow, tubular style profile that concentrates the visible hardware line and keeps the pull visually light on the front. Screw size is specified as M4 x 45mm, so the threaded interface is metric and coordinates with the pull's mounting design in typical cabinet materials.

How This Berenson Stainless Pull Works In Practice

Where This Stainless Steel Cabinet Pull Performs Best

The Berenson Stainless Steel Series pull with 17-5/8 inch (448 mm) center to center drilling fits projects that call for a longer handle across wider fronts. The stainless steel material and stainless steel finish suit installations where a continuous metal look is desired along multiple doors and drawers. With an overall length of 19-9/16 inch, the pull spans more of the cabinet frontage, giving users a broad gripping zone to open large drawers or tall pantry doors from different positions. The 1/2 inch width keeps the bar visually slim even at this length, which helps maintain a clean line across modern, frameless, or full-overlay cabinetry. A projection of 1-1/4 inch provides enough stand-off from the surface so hands can grab from above, below, or the side, which is useful on frequently used storage areas. The 1/2 inch base diameter anchors those spans with compact mounting points that concentrate the design at each end of the pull.

Details That Support Consistent Mounting Results

The 17-5/8 inch (448 mm) center to center spacing defines the drilling pattern for this 7073-9SS-C stainless steel pull, so repeated installations can follow one precise measurement across multiple cabinet fronts. Using this fixed spacing helps maintain consistent handle alignment along drawer stacks or door banks. The specified M4 x 45mm screw size indicates a metric thread pairing with the pull, which keeps fastening straightforward wherever standard cabinet thicknesses match that length. Projection of 1-1/4 inch keeps the load path slightly off the face, giving enough finger clearance while still seating the 1/2 inch bases tight to the surface. Width of 1/2 inch and matching 1/2 inch base diameter create a uniform tube-style proportion from the bar to the mounts, which simplifies layout when matching this pull with other Stainless Steel Series pieces. The stainless steel material combined with a stainless steel finish keeps the visible surface and core material aligned, supporting a consistent appearance wherever the handle edge or underside is visible.

Common Stainless Steel Pull Fit And Use Questions

Select This Stainless Steel Pull For Defined Layouts

The Berenson Stainless Steel Series pull with 17-5/8 inch (448 mm) center to center drilling, stainless steel material, and stainless steel finish gives a clearly defined layout point for long cabinet handles. At 19-9/16 inch overall length with 1-1/4 inch projection, 1/2 inch width, and 1/2 inch base diameter, it sets a consistent profile across doors and drawers. Using the specified M4 x 45mm screw size and SAP description STAINLESS STEEL PULL 448MM CC STLESS STL, this 7073-9SS-C pull from Wurth Baer Supply supports projects that call for a matching stainless handle line.