Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Stainless steel cabinet pull describes this Berenson Stainless Steel Series handle, which is a 3-3/4 inch (95 mm) center to center stainless steel pull designed for cabinet and furniture doors or drawers. The stainless steel material provides a hard-wearing gripping surface, which supports repeated daily use in busy residential or shop environments. The stainless steel finish matches the base material, so visual wear on the surface blends with the metal tone and helps maintain a consistent look over time. The overall length of 4-1/8 inches gives a handgrip that extends beyond the screw centers, which helps installers align the pull by referencing the ends during layout. A center to center size of 3-3/4 inches fits common drilling patterns, which supports straightforward layout on many cabinet fronts that follow this standard spacing.
A center to center dimension of 3-3/4 inches (95 mm) defines the hole spacing for this pull, which directly guides drilling or layout when adding it to new or existing cabinet fronts. The 1-1/8 inch projection sets how far the handle stands off the door or drawer face, which provides finger clearance while keeping the pull tight to the surface for a controlled profile. A width of 5/16 inch keeps the bar slim across the front, which affects how much visual weight the handle adds to narrow rails or drawer fronts. The 5/16 inch base diameter at each mounting point defines the contact circle on the surface, which helps when planning edge distances so the bases sit fully on flat material without overhanging profiles.
This Berenson stainless steel pull 7074-9SS-C, categorized under decorative handles and pulls, is suited to cabinet and furniture fronts that accept a 3-3/4 inch (95 mm) center to center pattern, which covers many common residential and shop layouts. The stainless steel material and finish align it with other stainless hardware, which is useful on installations that coordinate pulls with stainless hinges, appliances, or work surfaces. With an overall length of 4-1/8 inches, the pull sits proportionally on medium-width drawer fronts and doors, which helps it avoid looking oversized on smaller faces while still providing hand contact. The slim 5/16 inch width means the handle presents a narrow bar across the surface, which supports cleaner lines on contemporary cabinet designs using minimal visual hardware.
The 1-1/8 inch projection helps the pull stand off the face enough for fingers to wrap behind, which aids users wearing gloves in shop environments or those who prefer a deeper grip. Because the base diameter is also 5/16 inch, each mounting point maintains a tight footprint, which suits frames, rails, or narrow stile sections where there is limited flat surface. The Stainless Steel Series designation ties the pull to Berenson decorative cabinet hardware collections, which matters on projects where multiple handle sizes or styles from the same family are used to keep appearance consistent across doors and drawers.
The 3-3/4 inch (95 mm) center to center dimension gives installers a fixed reference between mounting holes, which helps maintain straight runs of handles across banks of drawers or doors sharing this spacing. The M4 x 45mm screw specification defines the thread and length used for attachment, which guides drilling size and helps match the pull to typical cabinet door and drawer front thicknesses suited to that screw length. A 4-1/8 inch overall length compared to the 3-3/4 inch center to center measurement means there is a modest overhang at each end, which can be used as a visual guide to center the pull on panel widths during layout.
The 1-1/8 inch projection works together with the 5/16 inch width to create a handle that stands out far enough for a secure grasp while remaining compact, which can reduce accidental bumps in tight walkways around cabinet runs. The 5/16 inch base diameter defines a small but stable contact area at the mounting points, which supports solid seating of the pull against flat cabinet surfaces. Because the material and finish are both stainless steel, the handle presents a unified surface that tolerates repeated hand contact and cleaning cycles typical in woodworking shops, kitchens, or storage installations using similar stainless components.
The Berenson stainless steel cabinet pull uses a 3-3/4 inch (95 mm) center to center spacing, which matches a common drilling pattern for cabinet doors and drawer fronts.
The pull has an overall length of 4-1/8 inches, a projection of 1-1/8 inches, and a width of 5/16 inch, which defines how far it extends and how it appears on the front.
This handle is stainless steel with a stainless steel finish, which provides a consistent metal surface suited to cabinets using other stainless hardware elements.
The pull uses M4 x 45mm screws, which indicates a metric M4 thread and a 45mm length appropriate for typical cabinet door or drawer front thicknesses.
Each mounting point has a 5/16 inch base diameter, which defines a compact footprint where the pull meets the cabinet surface.
This pull is part of the Stainless Steel Series from Berenson Corporation, identified by manufacturer part number 7074-9SS-C.
The Berenson Stainless Steel Series 3-3/4 inch center to center stainless steel pull combines a 4-1/8 inch overall length, 1-1/8 inch projection, and 5/16 inch width, which suits many cabinet and drawer fronts following this drilling pattern. The stainless steel material and finish align with other stainless components commonly used in woodworking and cabinet projects. When a project calls for a 3-3/4 inch center to center layout with a slim, stainless profile, this pull offers a defined set of dimensions that support straightforward planning and consistent results.
