Berenson Stainless Steel Series 11-5/16" (287 mm) Center to Center Stainless Steel Pull, - 7077-9SS-C

Stainless Steel Pull 288mm CC For Cabinet Use

stainless steel pull 288mm cc identifies this Berenson Corporation handle as a stainless steel cabinet pull with a center to center dimension of 11-5/16 inches. That sizing sets consistent spacing between mounting holes, which matters when laying out or matching drilled fronts. The pull length of 11-3/4 inches provides a longer gripping area, which helps when operating larger doors or wider drawers on residential or commercial projects. Stainless steel material provides a uniform stainless steel appearance, which supports visual continuity across a bank of cabinets or casework runs. The 3/8 inch width gives this pull a slender bar profile, which affects how it sits on narrow rails or drawer fronts. A projection of 1-3/8 inches sets the distance from the cabinet face, which creates finger clearance for gripping while keeping the handle closer to the face for a cleaner line. The stainless steel finish coordinates with other stainless hardware in the same area.

Key Stainless Steel Pull Details For Projects

• The 11-5/16 inch center to center dimension provides a precise drilling layout, which supports consistent handle placement across multiple cabinet doors and drawers on the same run.
• The 11-3/4 inch overall length gives a generous handhold, which helps users comfortably grab the pull at different points along wide doors or drawers during everyday use.
• The 1-3/8 inch projection defines how far the handle stands off the surface, which creates working finger space while helping doors and drawers clear surrounding trim or adjacent fronts.
• The 3/8 inch width creates a slim bar profile, which sits neatly on narrow rails or small drawer faces and maintains a streamlined look across modern cabinet designs.
• The stainless steel material with stainless steel finish delivers a consistent stainless appearance, which lets installers visually align this pull with other stainless components in the same room.

Mounting Dimensions That Support Straight Installation

The 11-5/16 inch center to center drilling dimension sets a fixed span between the mounting holes, which supports accurate jig setup or CNC programming for repeat cabinet production. A base dimension of 3/8 inch at each mounting point defines the footprint on the cabinet surface, which helps when checking rail height or stile width before drilling. The 1-3/8 inch projection determines how much the pull stands out from the door or drawer, which influences both user grip and clearance in tight galley runs. The overall length of 11-3/4 inches helps align this pull visually across wide fronts, which is useful when matching sightlines with other long handles in a layout. The 3/8 inch width also defines edge distance for drilling relative to the cabinet front, which can be important when working near panel profiles.

Using This Berenson Stainless Steel Pull In Workflows

Where This Stainless Steel Cabinet Pull Fits Best

This Berenson Corporation stainless steel pull belongs to the Stainless Steel collection, which positions it for applications where a stainless steel look is desired across cabinet hardware. The 11-5/16 inch center to center size helps it fit layouts calling for long pulls on tall doors, pantry units, or wide drawers where extended grip length is useful. With an overall length of 11-3/4 inches and a 3/8 inch bar width, the pull suits modern and streamlined cabinet faces that benefit from a slender linear handle. The stainless steel material and stainless steel finish align visually with stainless-faced appliances or other stainless details in a space, which supports a unified appearance in kitchens, workrooms, or storage areas using similar finishes.

Details That Help Repeatable Pull Installation Results

The specified 11-5/16 inch center to center dimension gives installers a clear measurement for drilling, which helps maintain consistent spacing and alignment between doors and drawers across a bank of cabinets. The base dimensions of 3/8 inch determine how much flat surface is needed at each mounting point, which matters when positioning the pull on narrow rails or near panel edges. A projection of 1-3/8 inches defines the standoff from the cabinet face, which supports predictable finger clearance and reduces guesswork during layout in tight corridors. The 3/8 inch width helps installers align the pull straight relative to door edges, since the slim bar provides an easy visual reference along the cabinet face. The M4 x 45mm screw size stated for this pull ties the handle to a specific fastener thread and length, which simplifies selecting the matching screw type during installation or replacement work.

Common Questions About This Stainless Steel Pull

Select This Pull For Stainless Cabinet Runs

This Berenson stainless steel cabinet pull with 11-5/16 inch center to center drilling and 11-3/4 inch overall length offers a long, slim handle suited to larger doors and drawers. The stainless steel material with stainless steel finish supports a coordinated look wherever stainless hardware is specified. With a 1-3/8 inch projection, 3/8 inch width, and 3/8 inch base dimensions, the pull provides defined mounting and clearance details that support consistent cabinet layouts. For projects built around a stainless hardware theme, this stainless steel pull 288mm cc gives clear dimensions that align with precise drilling and layout work.