Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
stainless steel cabinet knob 1-3/16 inch describes this Berenson Stainless Steel Series knob as a round pull with a 1-3/16 inch (30 mm) diameter head, giving cabinets and drawers a consistent grip point that feels substantial without crowding smaller fronts. The stainless steel material forms the body of the knob, providing a uniform metal look that matches other stainless hardware on the same job. Its stainless steel finish keeps the appearance visually tied to stainless hinges and pulls, so fronts read as one coordinated set when the installation is complete. The knob projection of 1-1/4 inch sets the hand clearance off the face of the door or drawer, creating a usable space to grab while staying tight enough to help avoid catching on clothing during everyday use. A base diameter of 9/16 inch creates a compact footprint at the mounting point, which helps this knob sit neatly on narrow rails and stile edges where wider bases could overlap profile details.
The 1-3/16 inch width noted for this Berenson Corporation knob matches its stated 1-3/16 inch diameter, so the body presents as a true round profile that aligns easily with centerlines during layout. With a projection of 1-1/4 inch, the knob stands off the surface enough to clear common door and drawer edge profiles, which helps when fastening through different panel thicknesses using the specified M4 x 45mm screw size. The 9/16 inch base diameter defines where the knob meets the surface, concentrating clamping pressure in a smaller circle so the fastener holds the assembly firmly against the face. As part of the Berenson Stainless Steel Series, the knob dimensions follow a predictable metric/imperial mix, using 30 mm for diameter and imperial fractions for projection, which helps installers read drawings that may show either system.
This Berenson Stainless Steel Series knob, with a 1-3/16 inch (30 mm) diameter, suits cabinet doors and drawers where a single, centered pull point is preferred over a wider handle. The stainless steel material supports use on utility, shop, or kitchen cabinets that visually tie into stainless steel surroundings. Its stainless steel finish matches the same material family, allowing installers to keep knobs, pulls, and visible metal details in one consistent appearance band. The 1-1/4 inch projection places the gripping surface away from the face, which can help fingers find the knob on deeper drawer fronts without overextending into the room. With a 9/16 inch base diameter, the contact area stays compact, so this knob works well on narrow rails or small drawer fronts where larger bases might crowd panel details or neighboring hardware.
The matching 1-3/16 inch diameter and width simplify layout because the knob presents as a true circle, making it straightforward to center on drilling marks or jigs. The specified M4 x 45mm screw size defines the threaded connection, giving a clear fastener standard that aligns with common cabinet construction using this type of knob. A projection of 1-1/4 inch controls how far the knob extends into the working area, balancing clearance for grip with a lower chance of snagging during movement past the cabinets. The 9/16 inch base diameter helps distribute load around the single fastener point, which matters when users pull doors and drawers repeatedly along the same axis. As part of the Berenson Stainless Steel Series and classified under knobs by Wurth Baer Supply, this piece fits into hardware schedules that call out specific series and categories, helping keep ordering and replacement consistent across multiple openings.
The Berenson knob has a 1-3/16 inch (30 mm) diameter and width, a 1-1/4 inch projection, and a 9/16 inch base diameter, which sets its grip size, stand-off, and footprint on the front.
The knob uses stainless steel material with a stainless steel finish, creating a unified metal look that blends with other stainless components in the same installation.
The 1-1/4 inch projection spaces the knob off the door or drawer face, giving fingers room to pull while keeping the hardware relatively close to the cabinet surface.
The knob is specified with an M4 x 45mm screw size, indicating the metric thread and length pairing used to secure it through typical cabinet front thicknesses.
The 9/16 inch base diameter sets a compact contact ring on the cabinet surface, supporting the pull while fitting cleanly on narrow frames or smaller drawer faces.
The knob is from the Berenson Stainless Steel Series by Berenson Corporation, giving it a defined collection identity for matching on multi-opening projects.
The Berenson Stainless Steel Series knob, listed by Wurth Baer Supply as a stainless steel knob with a 1-3/16 inch (30 mm) diameter, brings a defined size standard to cabinet layouts. Its stainless steel material and stainless steel finish align with projects built around stainless visual themes in kitchens, shops, or utility areas. With a 1-1/4 inch projection and 9/16 inch base diameter, the knob establishes predictable clearances and bearing area, which supports repeatable placement across doors and drawers.
