Berenson Adagio Oil Rubbed Bronze 1-3/16" (30 mm) Diameter Knob, 7896-1ORB-P

Adagio Knob 1-3/16 Inch Oil Rubbed Bronze Use

Adagio knob 1-3/16 inch oil rubbed bronze describes a Berenson Adagio Series knob designed for cabinet and furniture doors where a compact, round grip is preferred. The 1-3/16 inch (30 mm) diameter face provides a comfortable finger contact area, which helps installers center their pull on smaller doors and drawers. Its zinc die cast material creates a solid-feeling knob body, which supports a consistent turning feel when opening doors. The oil rubbed bronze finish gives the knob a dark, traditional look, which works well on projects calling for warm, bronze-toned decorative hardware. The 1 inch projection sets the knob off the surface enough for fingers to wrap behind it, which helps when aligning multiple knobs across a run of doors. A 1 inch base diameter transitions the knob cleanly to the door surface, which helps visually cover the standard drilled hole.

Key Details Of This Berenson Adagio Knob

• The Adagio Series identity ties this knob to other Berenson Adagio decorative hardware, which helps maintain a consistent style when mixing knobs and pulls on the same installation.
• The zinc die cast material creates a formed metal knob body, which supports a uniform shape and surface for repeatable positioning during installation across multiple cabinet fronts.
• The oil rubbed bronze finish provides a dark, bronzed appearance, which helps the knob coordinate with other oil rubbed bronze components in a room such as hinges or plumbing trim.
• The 1-3/16 inch diameter face controls how much of the door front the knob covers, which is useful when working near panel edges or narrow rail sections on cabinet doors.
• The 1 inch projection defines how far the knob stands off the door, which affects finger clearance and keeps the grip consistent from cabinet to cabinet in a kitchen or bath.
• The 1 inch base diameter sets the footprint at the mounting point, which helps cover the drilled hole cleanly and provides a defined landing area against the door surface.

Installation Dimensions And Screw Details

This Berenson Adagio cabinet knob uses a screw size of 8-32 x 1 inch, which matches a common cabinet knob thread pattern for straightforward mounting into standard door thicknesses. The 1-3/16 inch diameter and 1 inch projection work together to define where the knob sits in relation to door edges, which helps installers lay out consistent centerlines across a bank of doors. With a width stated as 1-3/16 inch, the knob presents a balanced round profile, which simplifies orienting it during installation since there is no directional pattern to align. The 1 inch projection also keeps the knob close enough to the door face for compact spaces, which matters when doors open near walls or adjacent cabinets.

Where This Berenson Adagio Cabinet Knob Fits

Adagio Series Knob For Cabinet And Furniture Doors

This Berenson Adagio Series knob, with its 1-3/16 inch (30 mm) diameter, suits cabinet and furniture doors that need a medium-size round pull point, which keeps the grip proportional on typical kitchen or bath fronts. The oil rubbed bronze finish places the knob visually in traditional and warm-toned settings, which supports projects where dark bronze hardware is carried across multiple rooms. Its width of 1-3/16 inch keeps the face compact, which helps when the knob must sit on narrow stiles or drawer fronts with limited flat area. The 1 inch base diameter provides a stable contact circle against the door, which helps the knob sit flush and visually anchors it on flat or slightly profiled doors.

Dimensions And Screw Size For Consistent Results

The 1 inch projection on this zinc die cast knob controls how far the hand moves away from the door face, which helps achieve uniform finger clearance when repeating the part across an entire cabinet run. Using the specified 8-32 x 1 inch screw size ties the knob to a well-known mounting standard, which simplifies planning drill depths and hardware layout for installers. The combination of 1-3/16 inch diameter and 1 inch projection defines a predictable working envelope around each mounting hole, which matters when locating knobs relative to neighboring doors or appliance panels. Its zinc die cast construction supports a consistent overall shape and weight from piece to piece, which helps maintain the same feel at each door pull location on a project.

Common Questions About This Adagio Series Knob

Choose This Knob For Oil Rubbed Bronze Projects

The Berenson Adagio Series oil rubbed bronze 1-3/16 inch diameter knob provides a zinc die cast construction, a 1 inch projection, and an 8-32 x 1 inch screw interface, which together support consistent cabinet layouts. Its 1 inch base diameter and round 1-3/16 inch width create a compact, centered grip point, which suits typical cabinet and furniture doors. For projects built around oil rubbed bronze decorative hardware, this knob offers a defined set of dimensions that help maintain uniform spacing, finger clearance, and visual alignment across doors and drawers.