Berenson Vibrato Series 5-1/16" (128 mm) Center to Center Verona Bronze Pull, - 7904-1VB-P

Berenson Vibrato Series Pull For Cabinet Projects

Berenson Vibrato Series pull gives a 5-1/16 inch center to center grip that works well on many cabinet doors and drawers, so layouts stay consistent across a run of fronts. The Verona Bronze finish provides a distinct bronze tone that sets a steady visual line on face frames and panels. Zinc die cast construction provides a solid metal body, which supports repeat use on high-touch fronts. Overall length of 6-7/16 inches means the pull extends past the hole centers enough for comfortable grasping during daily use. A projection of 1-5/8 inches holds the hand away from the cabinet surface, which helps prevent knuckles from rubbing finished faces. Width of 5/16 inch keeps the profile slim, which suits tight visual designs where hardware should stay streamlined. A base diameter of 1/2 inch defines the footprint against the door or drawer surface for clean contact.

Key Verona Bronze Pull Details For Planning

• The 5-1/16 inch center to center dimension sets the hole spacing, which lets installers drill consistent patterns and line up multiple doors and drawers in straight runs.
• The 6-7/16 inch overall length defines the visible handle span, which helps with laying out proportions on wider or taller fronts before boring any hardware holes.
• The 1-5/8 inch projection establishes how far the pull stands off the surface, giving enough finger clearance for a full grip without crowding adjacent doors.
• The 5/16 inch width keeps the handle slim, which suits narrow rails or stile areas where wider pulls might crowd panel details or nearby hardware.
• The 1/2 inch base diameter shows the contact area at each mounting point, which helps cover drilled holes neatly and creates a defined seating surface on the wood.
• The Verona Bronze finish sets the color tone of the hardware, which supports matching this pull to other Verona Bronze pieces in the same space.

Installation Dimensions And Screw Size Details

The 5-1/16 inch center to center measurement fixes the boring distance between holes, so jigs or templates can be set once and repeated across all fronts. Length of 6-7/16 inches means the handle extends beyond the mounting points, which helps with visual centering on wider drawer faces. Projection of 1-5/8 inches provides enough stand-off to clear typical door and drawer edge profiles. Base diameter at 1/2 inch provides a defined bearing surface where the pull meets the cabinet face. Screw size 8-32 x 1 inch matches a common machine screw standard for cabinet pulls, which supports straightforward mounting through standard door and drawer thickness ranges.

Using This Verona Bronze Pull In Cabinet Work

Where The Berenson Vibrato Series Pull Fits Best

The Berenson Corporation Vibrato Series pull is designed for use as decorative cabinet hardware in handle and pull applications, so it suits cabinet doors and drawers in woodworking projects. The 5-1/16 inch center to center spacing aligns with a common cabinet pull layout, which works well on kitchen, bath, and built-in storage fronts that follow standard boring patterns. The Verona Bronze finish ties directly to the Vibrato Series collection, which helps maintain a consistent hardware look when multiple pulls from the same series are used in one installation. Zinc die cast material supports use in residential and light commercial cabinet environments, where metal pulls are preferred for repeated opening and closing of doors and drawers. The combination of 6-7/16 inch overall length and 5/16 inch width suits both medium and smaller fronts, giving enough hand contact without overpowering narrow rails.

Why These Dimensions Support Repeatable Installations

The 5-1/16 inch center to center sizing keeps hole spacing standardized, which simplifies setting up drilling jigs and reduces layout time when installing many pulls. Projection of 1-5/8 inches creates a consistent stand-off from the cabinet face, which helps achieve uniform hand clearance across doors and drawers of varying thickness. The 1/2 inch base diameter at each end of the pull sets a clear bearing ring, which helps seat the pull evenly against flat surfaces for a uniform appearance. A 6-7/16 inch overall length gives a predictable edge-to-edge hardware span, which aids in visually aligning pulls across banks of drawers so hardware lines stay consistent. The 5/16 inch width keeps the handle narrow, which allows use on slimmer rails or near adjacent design elements without crowding them, supporting clean sightlines along the cabinetry. The 8-32 x 1 inch screw size specification clarifies threading and length, which aligns with common cabinet boring practices and supports straightforward tool selection on site.

Common Questions About This Verona Bronze Pull

Selecting This Pull For Your Next Cabinet Run

The Berenson Vibrato Series 5-1/16 inch center to center Verona Bronze pull brings a defined set of dimensions that support predictable cabinet layouts. With zinc die cast construction, a 6-7/16 inch overall length, and 1-5/8 inch projection, it fits handle-and-pull applications where repeatable spacing and comfortable grip are priorities. For cabinet work that relies on consistent hole boring and a coordinated Verona Bronze finish across multiple fronts, this 7904-1VB-P pull is a practical choice to add to your next run.