Berenson Adagio Oil Rubbed Bronze 1-1/4" (32 mm) Diameter Knob, 7908-1ORB-P

Adagio Oil Rubbed Bronze Knob For Cabinets

Adagio oil rubbed bronze knob is a Berenson Adagio Series knob designed for decorative cabinet and furniture applications where a round pull point is needed. The 1-1/4 inch diameter face provides a comfortable gripping surface, which helps when opening heavier doors or larger drawers on built-ins. Its 1-1/16 inch projection spaces hands away from the surface, reducing finger contact with finished wood or laminate. The zinc die cast construction creates a solid-feeling knob body, which supports consistent feel across multiple doors in a run. A 5/8 inch base diameter keeps the footprint tight, allowing layout on narrow rails or stile faces without crowding. The oil rubbed bronze finish establishes a dark, traditional look that ties together hinges, pulls, and other bronze-finished decorative hardware on the same installation.

Key Adagio Knob Details That Help On The Job

• The 1-1/4 inch (32 mm) diameter face gives a full contact area, which supports positive finger grip on cabinet doors and drawers during daily use.
• The 1-1/16 inch projection sets the hand away from the door surface, which helps limit knuckle rubbing on adjacent faces during operation.
• The 5/8 inch base diameter keeps the mounting footprint compact, which leaves space when installing knobs on narrow frame members or tight drawer fronts.
• The zinc die cast material forms a rigid knob, which maintains its shape under repeated pulling forces in high-use cabinet locations.
• The oil rubbed bronze finish provides a dark bronze appearance, which helps match other oil rubbed bronze decorative hardware in the same room.
• The screw size of 8-32 by 1 inch defines the threaded interface, which simplifies drilling and tapping decisions when preparing cabinet fronts.

Installation Details For The 1-1/4 Inch Adagio Knob

The Adagio oil rubbed bronze knob uses an 8-32 by 1 inch screw size, which matches a standard cabinet knob thread, allowing straightforward installation into typical drilled holes. Its round 1-1/4 inch diameter face gives a clear visual center, which aids in aligning knobs consistently along rails or drawer fronts. The 5/8 inch base diameter concentrates contact around the drilled hole, which helps seat the knob firmly against flat cabinet surfaces. With a 1-1/16 inch projection, the installed knob stands off the cabinet enough to clear most finger profiles, which supports smooth operation across a full bank of doors.

Using The Berenson Adagio Knob In Cabinet Projects

Where This Adagio Oil Rubbed Bronze Knob Works

The Berenson Adagio Series oil rubbed bronze knob is suited to cabinet and furniture fronts where a 1-1/4 inch diameter knob provides the right scale. The 1-1/4 inch (32 mm) width matches many kitchen and bath door sizes, which supports use across wall and base cabinets. Its 1-1/16 inch projection keeps the knob out from the door plane, which is useful on overlay cabinet doors where extra clearance helps fingers find a secure pull point. The 5/8 inch base diameter allows mounting on narrow rails, which suits face-frame cabinets with slim stiles or small drawer fronts. The oil rubbed bronze finish gives a coordinated appearance with other bronze decorative hardware, which supports visual continuity in projects using matching hinges or pulls. Zinc die cast construction creates a solid knob body, which is practical for repeated opening cycles on frequently used doors and drawers.

Details That Support Consistent Layout And Results

The 1-1/4 inch diameter face of the Adagio knob provides a defined center point, which simplifies jig setup for repetitive drilling across a run of cabinet fronts. The 8-32 by 1 inch screw size matches a common hardware standard, which helps streamline bit selection and tap alignment when preparing mounting holes. With a 1-1/16 inch projection, the installed knob maintains a predictable stand-off distance, which is useful when aligning knobs across doors and drawers so that faces sit on the same visual line. The 5/8 inch base diameter keeps the contact ring localized, which helps the knob seat flat against prepared surfaces without overlapping neighboring profiles. The oil rubbed bronze finish offers a consistent dark tone, which supports using the same knob across multiple rooms while maintaining a uniform decorative hardware look.

Common Questions About The Adagio Series Knob

Selecting This Adagio Knob For Your Next Project

The Berenson Adagio oil rubbed bronze knob combines a 1-1/4 inch diameter face, 1-1/16 inch projection, and 5/8 inch base, giving a clear sense of how it will sit and operate on cabinet doors and drawers. Its zinc die cast construction and oil rubbed bronze finish define both structure and appearance, which helps match this knob to other bronze decorative hardware choices across a project. With a standard 8-32 by 1 inch screw size and consistent Adagio Series styling, this knob provides a defined option when selecting hardware for new cabinet builds or decorative updates.