Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
4 x 3-1/16 coat hook brushed nickel describes a Berenson Corporation decorative coat and hat hook designed to organize garments on a wall or panel. The 4 inch length and 3-1/16 inch profile give this decorative hook enough projection to hold coats and hats without crowding them together, which supports straightforward use in entry, closet, or shop areas. As part of Berenson's premium line of decorative coat and hat hooks, this piece provides a consistent style choice when the project calls for coordinated visible hardware. The hook is classified in decorative hardware and moldings under decorative hooks, so it suits jobs where appearance is part of the finished result as much as basic hanging capacity.
The hook uses four 8/32 x 1 inch installation screws, so each mounting point is anchored with machine-thread fasteners that match the base layout, providing a solid hold in properly prepared material. With its 4 inch length and 3-1/16 inch overall dimension, the hook sets garments out from the mounting surface, helping coats and hats hang cleanly without excessive contact with the wall or cabinet face. The 1-1/16 inch base size defines the screw spread and bearing area, guiding layout when spacing multiple hooks along a rail or inside a closet. Because the hook is a single, one type design with a double prong, installers can repeat the same drill pattern and orientation across an entire run, which saves layout time on multi-hook installations.
This Berenson Corporation decorative coat and hat hook belongs to the decorative hooks class, so it is suited to visible locations on cabinets, built-ins, and wall boards where hardware contributes to the finished look. The brushed nickel finish matches many brushed nickel pulls and knobs, allowing installers to carry the same metallic tone from door hardware onto coat and hat storage in entryways or mudroom cabinetry. With its 4 inch by 3-1/16 inch size, the hook works well on standard-height coat rails or the end of cabinet panels, giving enough reach for garments without dominating narrow surfaces. The compact 1-1/16 inch base makes this hook practical on slim face frames and decorative moldings, giving flexibility when designing hanging points in constrained spaces.
The zinc construction of this decorative coat and hat hook provides a firm substrate for the brushed nickel finish, which supports a uniform sheen across multiple hooks on the same wall or cabinet system. Because it is a one type, double prong design, the hook presents the same geometry every time, so installers can maintain consistent clearance between garments when laying out a row of hooks. The use of four 8/32 x 1 inch installation screws establishes a repeatable fastener pattern, which simplifies jig setup and drilling workflows on shop-built panels. The defined dimensions of 4 inches by 3-1/16 inches allow designers to calculate vertical and horizontal spacing between hooks so that coats and hats hang without overlapping more than intended. Being part of Berenson's premium line of decorative coat and hat hooks, this hook supports projects that require matching decorative hardware from the same source, helping maintain design continuity from room to room.
The coat and hat hook is described as 4 inches by 3-1/16 inches, giving installers a clear sense of projection and height when planning spacing on walls, cabinet ends, or rails.
The hook is made of zinc, which provides a solid base material for the decorative form and supports a consistent brushed nickel finish across multiple units on the same project.
The hook uses four 8/32 x 1 inch installation screws, so each base corner is fastened, creating a secure mount pattern for coat and hat loads on appropriate substrates.
The brushed nickel finish gives the hook a subdued metallic look that aligns with other brushed nickel decorative hardware, supporting a unified appearance on cabinets and wall-mounted rails.
The one type, double prong layout provides two hanging points on a single hook, which helps arrange coats and hats or multiple light items without adding extra mounting locations.
Manufacturer part number 8012-BPN-P identifies this specific Berenson Prelude hook configuration, helping match finish and style when reordering or extending an existing installation.
The Berenson Corporation 4 inch by 3-1/16 inch decorative coat and hat hook in brushed nickel gives installers a defined combination of zinc construction, double prong design, and compact 1-1/16 inch base for organized hanging space. With four 8/32 x 1 inch installation screws establishing a stable mount and a finish that aligns with brushed nickel decorative hardware, it suits cabinetry, wall rails, and woodworking projects that balance function and appearance. Use this Prelude hook when the project calls for consistent dimensions and a matching Berenson decorative hardware look across multiple rooms or fixtures.
Sold In: 1 Each
