
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Berenson decorative coat hook delivers a 4 inch long hanging point in a weathered nickel finish, giving you a practical place to hang coats and hats while matching other traditionally styled decorative hardware in the same space. The hook is part of Berenson Corporation's premium line of decorative coat and hat hooks, so it is designed to function as visible hardware in finished woodworking and cabinet projects rather than hidden utility hardware. Its double prong layout provides two hanging points on one hook, which helps organize multiple items on a single mounting location in tight mudroom, bath, or closet layouts. As a decorative hook within Wurth Baer Supply's hardware assortment, it fits naturally into projects where visual detail and consistent finish are part of the job requirements.
This 4 inch coat hook uses four 8/32 x 1 inch installation screws, so it mounts through the base plate with machine-thread fasteners that bite into prepared holes or compatible inserts in wood or panel material. The 1-1/16 inch base keeps those screw locations close together, which helps position the hook on narrow face frames, stiles, or wall cleats without interfering with adjacent hardware. With its zinc body and weathered nickel finish, the hook fastens as finished decorative hardware, so it installs late in the project sequence after panels and doors receive their final surface work.
This 4 inch x 3-1/16 inch coat hook, listed by Berenson Corporation under manufacturer part number 8013-WN-P, suits projects where a compact but visually finished hanging point is needed on cabinets, wall boards, or doors. As part of Berenson's premium line of decorative coat and hat hooks, it is meant for visible locations in woodworking projects supplied by Wurth Baer Supply, such as entry areas, closet systems, or bath storage built-ins. The 1-1/16 inch base allows the hook to sit comfortably on narrow rails or side panels, which is useful on custom mudroom lockers or cabinet ends where wider bases would crowd neighboring components. Its weathered nickel finish supports installations alongside similarly finished pulls and knobs, tying wall-mounted hanging points into the overall decorative hardware scheme.
The double prong, one type configuration means every hook in the run presents the same two-prong profile, which helps align multiple hooks at a consistent height and orientation along a board or cabinet run. Using four 8/32 x 1 inch installation screws gives each hook a predictable fastener layout, so drilling patterns can be repeated from one panel to the next for efficient shop or onsite work. The zinc construction yields a solid metal base for those screw points, helping the hook sit flush against wood or composite substrates when tightened down. Weathered nickel finish on the zinc body provides a uniform surface around the curved prongs and base, which matters when hooks are installed in rows where small finish differences would stand out. With its defined length of 4 inches and overall height of 3-1/16 inches, layout work can account for vertical clearance above and below the hook, keeping hanging items spaced away from trim, benches, or cabinet tops.
The Berenson decorative coat hook measures 4 inches by 3-1/16 inches with a 1-1/16 inch base, allowing it to provide usable hanging projection while fitting comfortably on narrow cabinet parts or wall boards.
The hook is made of zinc with a weathered nickel finish, so it installs as decorative metal hardware that visually coordinates with other nickel-toned components in the project.
The one type, double prong design offers two hanging points on a single hook, allowing coats and hats or multiple lighter items to share one mounting location on a panel or board.
The coat hook fastens with four 8/32 x 1 inch installation screws through its base, giving a stable attachment pattern suited to wood or similar substrates that accept machine-thread screws.
The weathered nickel finish suits cabinetry, closets, and wall boards that use nickel-finished pulls and knobs, helping the hanging points match the broader decorative hardware selection.
The manufacturer part number is 8013-WN-P, which identifies this specific 4 inch weathered nickel coat and hat hook within Berenson Corporation's decorative hook line.
Choosing this Berenson decorative coat hook in weathered nickel ties hanging points into the same visual language as other decorative hardware sourced through Wurth Baer Supply. Its 4 inch length, 3-1/16 inch height, and 1-1/16 inch base give installers defined dimensions to plan around on cabinets, wall boards, or doors. With zinc construction, a double prong layout, and four 8/32 x 1 inch installation screws, it fits projects that call for consistent, repeatable hook placement across finished woodworking.
Sold In: 1 Each