Plymouth knob 1-1/4 inch polished chrome identifies this Berenson Plymouth Series cabinet knob as a 1-1/4 inch diameter pull in a bright chrome finish, giving cabinets and furniture a defined visual target that is easy to grasp during everyday use. The solid brass material forms a dense body, which gives the knob a substantial feel in the hand and helps it stay stable under repeated opening and closing. A polished chrome finish reflects surrounding light, which helps this knob visually coordinate with other chrome decorative hardware in the same space. The 1-1/4 inch overall width creates a broad gripping surface, so fingers can catch the knob quickly from different approach angles. A defined Plymouth Series design family ties multiple knobs across a project together, helping doors and drawers share the same style and proportions.
The 1-1/4 inch diameter on this Berenson Plymouth Series knob sets a familiar footprint on cabinet and furniture fronts, which helps it land proportionally on doors and drawers from narrow to wide. A 3/4 inch base diameter steps down from the head to the mounting point, forming a defined collar that seats cleanly against the surface line of the panel. The 1-1/8 inch projection carries the gripping point away from the door or drawer face, providing room for fingers while keeping the knob close enough to avoid snagging on passing traffic. An 8-32 thread size coordinates the knob with a widely used cabinet screw thread, which lets it mate cleanly with a matching 8-32 x 1 inch fastener for a secure mechanical connection.
The Plymouth Series designation ties this knob to Berenson decorative hardware, which helps it fit into projects already using Berenson Corporation pieces from the same family. A 1-1/4 inch diameter works well on cabinet doors and drawer fronts that need a single central pull point, so one part number can be used across banks of cabinetry to keep layouts consistent. The polished chrome finish lets this knob sit comfortably in rooms already using chrome faucets, hinges, or other bright-finished elements, keeping visual lines straightforward for design-driven jobs. A 3/4 inch base diameter sits neatly on face frames or slab fronts, so it looks balanced whether it lands near an edge or centered on a narrow drawer.
The solid brass material gives this Plymouth knob the mass needed for frequent-touch locations such as kitchen cabinet doors, bath vanities, and built-ins, supporting a confident feel whenever doors or drawers are pulled. The 1-1/8 inch projection provides useful clearance for larger hands on thicker fronts, reducing the chance of fingers rubbing the surface during each pull. Because the 1-1/4 inch width and projection fall in a common cabinet hardware range, this knob suits both new installations and projects matching existing polished chrome knobs with similar proportions.
The 1-1/4 inch diameter head gives installers a fixed reference when laying out drilling templates, which simplifies consistent centerline spacing across long cabinet runs. A 3/4 inch base diameter keeps the contact ring small enough to sit fully on standard rail and stile widths, helping the knob seat flat even when installed close to inside profiles. The 1-1/8 inch projection defines the stand-off distance from the panel, which helps planning when knobs must clear nearby moldings, neighboring doors, or appliance panels in tight runs.
The 8-32 x 1 inch screw size in the specification sets expectations for drilling and tapping needs, allowing the same bit and thread knowledge to carry through multiple knobs on the job. Solid brass construction gives the threaded socket in the knob a sturdy material to engage the 8-32 fastener, supporting firm tightening without deformation at the connection point. The polished chrome surface remains smooth where hands contact the knob, so installers and users feel a uniform finish as they pull, supporting a clean, finished impression on completed cabinetry.
The Berenson Plymouth Series knob has a 1-1/4 inch diameter, giving a broad gripping surface that suits both cabinet doors and drawers using a single central pull point.
The Plymouth knob has a 1-1/8 inch projection, bringing the grip forward enough for finger clearance while keeping the knob relatively tight to the cabinet face.
The Plymouth Series knob is made from solid brass, providing a dense core that supports a substantial feel and stable mounting under repeated everyday use.
The base diameter is 3/4 inch, creating a defined collar that seats neatly on the door or drawer front and helps distribute load around the mounting bore.
The knob is specified with an 8-32 x 1 inch screw size, aligning with a common cabinet hardware thread to support straightforward drilling and fastening.
This Berenson Plymouth Series knob has a polished chrome finish, giving a bright, reflective surface that coordinates with other polished chrome hardware.
The Berenson Plymouth Series polished chrome 1-1/4 inch diameter knob brings together solid brass construction, a 3/4 inch base, and 1-1/8 inch projection to support everyday cabinet use with consistent hand clearance. Its 8-32 x 1 inch screw size specification fits standard cabinet hardware practices, helping layouts stay predictable across a full run of doors and drawers. Use this knob wherever a polished chrome finish and a familiar 1-1/4 inch cabinet knob footprint are required to keep a project visually and dimensionally consistent.