Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Berenson Plymouth Series satin brass knob gives cabinet doors and drawers a coordinated pull point, so doors open smoothly and installers get a consistent look across the run. The knob is part of the Plymouth Series, which helps match this piece with other Berenson hardware from the same collection on a project. Its satin brass finish presents a muted brass tone that softens reflections, which helps visual alignment and finish matching under varied shop or site lighting. The knob uses a zinc die cast construction, so the core material is stable under normal cabinet use while keeping weight manageable for standard doors and drawer fronts. A diameter of 1-1/4 inch provides a defined grip area that is easy to center on typical cabinet faces, which helps maintain even layouts from door to door.
The Plymouth knob 1-1/4 inch diameter specification gives a straightforward drilling target when laying out hardware jigs for face frame or frameless cabinetry, which helps speed repeat work across multiple doors. With a 3/4 inch base diameter, the bearing surface around the fastener remains compact, which keeps the knob centered on narrow stiles without crowding adjacent profiles. The 1-1/8 inch projection establishes the standoff from the face, which aids in planning clearances around adjacent knobs, pulls, or nearby walls. The knob is sized for a standard 8-32 thread screw, so the mounting interface aligns with common cabinet drilling practices that rely on this thread size for hardware attachment.
This 1-1/4 inch cabinet door knob from the Plymouth Series fits well on doors and drawers that require a unified knob size across a kitchen, bath, or built-in run, because the repeated diameter keeps the visual rhythm consistent. The satin brass finish helps the knob serve as a warm but controlled accent against painted or stained fronts, which supports design schemes that call for brass hardware without high-gloss reflection. With a base diameter of 3/4 inch, the knob sits neatly on narrower rails and smaller fronts, so it suits smaller bath cabinets as well as larger kitchen runs. The 1-1/8 inch projection makes the knob stand off enough for fingers to get behind it, which is helpful on thicker overlay doors where shallow pulls can be harder to grab.
The Berenson Plymouth Series satin brass knob uses a clearly defined 1-1/4 inch diameter, which simplifies jig setup for installers repeating center-to-center measurements on long cabinet banks. Matching diameter and width across the description provides a single, predictable size reference, which helps reduce layout errors when ordering or drilling for multiple openings. Zinc die cast construction keeps each knob profile uniform from piece to piece, which supports straight visual lines when cabinets are viewed down a run. The 3/4 inch base diameter helps conceal the drilled hole while keeping the footprint contained, which is useful when working close to edge profiles or panel details. A projection of 1-1/8 inch brings the gripping surface forward just enough to separate hands from the door face, which can reduce smudging around high-use doors and drawers.
The Berenson Plymouth Series satin brass knob has a 1-1/4 inch diameter, which sets the overall gripping area and helps determine drilling positions on cabinet doors and drawers.
The Plymouth knob 1-1/4 inch diameter model has a 1-1/8 inch projection, which defines how far it stands off the cabinet face for finger clearance.
The 9955-1SB-P cabinet knob is zinc die cast, which provides a consistent shape and weight suitable for everyday cabinet door and drawer use.
The 9955-1SB-P satin brass knob has a satin brass finish, which offers a softer brass appearance that coordinates with other satin brass hardware.
This Berenson Plymouth cabinet knob has a base diameter of 3/4 inch, which defines the footprint contacting the door or drawer surface.
The Plymouth Series satin brass knob is specified with an 8-32 screw size, which matches standard cabinet hardware threading for mounting.
The Berenson Plymouth cabinet knob in satin brass ties projects to a known 1-1/4 inch diameter, 3/4 inch base, and 1-1/8 inch projection, so cabinet layouts stay consistent across doors and drawers. Using the 9955-1SB-P part number aligns selection with the Plymouth Series, which supports matching this knob with other Berenson collection pieces on the same job. For cabinet hardware runs that call for a satin brass zinc die cast knob with standard 8-32 threading, this model from Wurth Baer Supply delivers those defined dimensions for planned installations.